Jump to content
SAU Community

Recommended Posts

need to pick someone's brain

car is r33 gtst

52mm isc alloy radiator

link ecu

basically the car runs so cold on my stock gauge im not sure its even up 2 running temp? and might explain my horrible fuel economy?perhaps in cold start alot?

i know its winter and all.. but during the day time it will get about 3mm above the cold on gauge 22 degree day... and at night it barely moves off the cold gauge lol 8 degrees last nite..

what could i do 2 try and bring it up more?

thanx

Link to comment
https://www.sau.com.au/forums/topic/327400-r33-operating-temp/
Share on other sites

you cant really judge the temp from the stock gauge

i've got an ecutalk display and it reads the stock sensors

my gauge will start moving off the bottom at about 60° and the middle is about 80° but 80° to 90° it doesn't really move

if you want to know what temp its running you could get an aftermarket gauge and put the sender in the return pipe of the radiator (supercheap sell adaptors that you cut the radiator hose in half and put in the middle)

or go to jaycar and get an lcd temp display kit (prob have to assemble it yourself but its easy) and leave it in your car permanently

Put the stock radiator back!

But seriously take your thermostat out and test it in a jug adding hot water till it opens - or since you have gone to the trouble of pulling it out just put a new one in anyway. You should get a rough idea of how hot your motor is by the output of the heater. If there is nothing wrong with your thermostat try blanking off two thirds of your radiator for the winter.

replace the thermostat, it shouldnt matter what temp it is outside its job is to keep the motor around 80c and will only flow enough coolant out to keep it there. once they get old they can get stuck open and it takes ages to get the car up to temp wasting fuel and not allowing it to run at the correct temp it was designed for if you have a good radiator fitted.

you cant really judge the temp from the stock gauge

i've got an ecutalk display and it reads the stock sensors

my gauge will start moving off the bottom at about 60° and the middle is about 80° but 80° to 90° it doesn't really move

if you want to know what temp its running you could get an aftermarket gauge and put the sender in the return hose of the radiator (supercheap sell adaptors that you cut the radiator hose in half and put in the middle)

or go to jaycar and get an lcd temp display kit (prob have to assemble it yourself but its easy) and leave it in your car permanently

NO. put it in the top hose . from the thermo stat to the top radiator tank

it should run about 82 degrees . and idealy should be about half way up the gauge . does your heater go hot or only half arse . when its got as warm as you think its goin to get gout andt feel the top hose . it should be too hot to keep your hand on .

the gauge and the ecy have their own temperature senders .

there is talk about some ecus having different temperature sensors installed for the ecu to read . check if your two look stock

or just buy a new thermo stat . leave the alloy radiator in it . thremo stat most likely isnt doin its job

before going into solution mode, check the actual water temp with a digital thermometer

it might be perfectly ok and you are changing things quicker than underwear to possibly fix something that isnt broken

sorry, i meant return to the rad

i also meant to add that i thought the thermostat was at fault here

whip it out and boil the kettle, then pour the boiling water on the thermostat, it should open up

if not, get a new one - and don't get a low temp one, you just don't need it

Yep don't go off the stock gauge, there is no way to tell.

FYI i run between 69 & 73 degrees with a Race Radiators item on a typical day. You might need to just alter the cold start mapping and so on

69 to 73?? That sounds quite cold, thought the ideal operating temperature is around 80degrees?

Long as cold start is adjusted and so on, I don't have any economy issues to speak of :whistling:

I get 400-450km to a tank (55l) around town or around 550km cruising @ 100

So it's clearly not a problem, and makes the same power as everyone else!

69 to 73?? That sounds quite cold, thought the ideal operating temperature is around 80degrees?

its a 31 thing, myne does the same. will not budge from 69 at night time. got up to a boiling 82 out on the track :whistling:

Maybe, i also have a thick intercooler & a small A/C condenser all infront of the rad as well, and the front bar really doesnt let much air in given the intake is less than half the size of the rad.

It'd be interesting to have someone look properly into it and workout why :whistling:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just don't use ChatGPT or any other artificial stupidity for the equivalent of googling. Their demonstrated inability to discriminate reality from hallucination should be enough to make them totally untrusted. LLMs don't know anything and cannot think to even the smallest extent. They are just predictors of the next word, and that should never be confused with capability.
    • I think, given the usage model described in the OP, I'd never ever experience the wonders of the 400kW upgrade. What I really need is boost from 2000rpm and probably no more than 260-270rwkW. But I suspect that the highflow is not actually the turbo for that purpose, so I may in fact need to get a G25 or 30 or something right sized and very spooly. We shall see after it is tuned. I've had to back the boost and boost ramp off to stop the thing from pinging since the highflow went on, so I've been almost living the NA life for 9 months now! Injectors are recently in hand. AFM is in hand. Dyno is fixed. Just need to clear a queue of f**king Supras out of the way (and probably fit my new gearbox). So....some time this year? Lol.
    • For what I gather is a Sunday/summer car....braided is fine. You're not going to be left without a vehicle and you have plenty of time for inspection/maintenance. Oof. I wouldn't use them that way. They can probably handle the temperature** but the internal corrugations means that their flow characteristics are a bit shit. Lots of extra friction and pressure loss. Makes them flow like the next pipe size down. ** They are stainless, and the stainless can usually be at least something like 304L, which is pretty good at higher temperatures (unlike 316L, which I would use for a wrt/corrosive environment, but not a particularly hot environment). But the welding needs to be top notch. And even then, because you usually need at least one cone-seat end on them (because you can twist the hose and do up both ends at the same time unless one of them is a union) they can be prone to coming loose with heat cycles.
    • I don't have the OEM oil feed lines though and the turbo-wraparound line is torn, only has water. My plan is to get replacements for these and just connect a braided line to there. And make sure it's leak free. Hoses like these are also sometimes used to connect external wastegates, so for an EGR I think you're good using them.
    • Alright I understand. The most likely case is probably gonna be that I just keep the OEM unit in the car as long as it works.
×
×
  • Create New...