Jump to content
SAU Community

Recommended Posts

Stock Injectors and AFM run out of safety margin / resolution at what.... like 210-220rwkw?

I wanna see this graph :P

will be lean as f**k and injectors being soooo stretched i'd be surprised if 270rwkw is genuine, could get close to it though.

AFM can be tuned around when beyond resolution with some creativeness, however your idle and low revs get pretty messy

creatd had a GTT that was making 370rwkw on c16 with a standard AFM

no problems Hamish I bought the car 18 months ago pretty well built up to were it is now

and was shown a dyno sheet before bought car and thought it was stretched to the limit

have some adjustments to boost dropping it to 12 psi & I am taking all tips on board

if you guys have any more tips that will help out

I would be happy take any help I can get.

have thought seriously about joining a club for idea's and general help from other people

no probs man... basically you have a 300rwkw turbo but no supporting mods, which means that the car wont be getting enough fuel. this will result in cylinder temps getting too high, and parts failing under load.

for a 300rwkw RB25 you should run a minimum of:

full standalone ECU (PFC, nistune, link, vipec, etc etc)

Z32 AFM

500cc injectors (however if you want to use e85 in the future think about getting 1000's

fuel pump (single intank you mentioned will be fine)

a good tuner

+ the other shit you already have...

i'd also look at getting a 1.5 way diff if I were you :)

have a look through this thread for a good idea of what people have done to manage unopened 300kw setups

http://www.skylinesaustralia.com/forums/topic/389417-300kw-unopened-25-club/

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...