Jump to content
SAU Community

Recommended Posts

Stock Injectors and AFM run out of safety margin / resolution at what.... like 210-220rwkw?

I wanna see this graph :P

will be lean as f**k and injectors being soooo stretched i'd be surprised if 270rwkw is genuine, could get close to it though.

AFM can be tuned around when beyond resolution with some creativeness, however your idle and low revs get pretty messy

creatd had a GTT that was making 370rwkw on c16 with a standard AFM

no problems Hamish I bought the car 18 months ago pretty well built up to were it is now

and was shown a dyno sheet before bought car and thought it was stretched to the limit

have some adjustments to boost dropping it to 12 psi & I am taking all tips on board

if you guys have any more tips that will help out

I would be happy take any help I can get.

have thought seriously about joining a club for idea's and general help from other people

no probs man... basically you have a 300rwkw turbo but no supporting mods, which means that the car wont be getting enough fuel. this will result in cylinder temps getting too high, and parts failing under load.

for a 300rwkw RB25 you should run a minimum of:

full standalone ECU (PFC, nistune, link, vipec, etc etc)

Z32 AFM

500cc injectors (however if you want to use e85 in the future think about getting 1000's

fuel pump (single intank you mentioned will be fine)

a good tuner

+ the other shit you already have...

i'd also look at getting a 1.5 way diff if I were you :)

have a look through this thread for a good idea of what people have done to manage unopened 300kw setups

http://www.skylinesaustralia.com/forums/topic/389417-300kw-unopened-25-club/

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I refer you to this thread on PF, by someone who knows what he's doing. Paints a good picture of the humble AD09.
    • Ha, I've never pressed the X in all these years incase it removed the notification for all Admins
    • I don't know, I've never done it that way, but 1. While it is an interference engine, there is still clearance between the valves and the piston at all points in the regular timing cycle 2. There is not a lot of distance before you can't catch the top of the valve stem any more I don't know if 2 is greater or less than 1. But 3. If it doesn't work out you are f**ked, engine is coming out to disassemble so it is a big bet.
    • Semi slicks are horrible for road use, just use a high performance road tyre unless you really need the maximum grip. Noisy, unpredictable (amazing, until they are not), expensive due to very high wear and not good in cold and particular wet. And yes, it is a thing to store cars on stands instead of tyres if you know they are going to be parked up long term.....but who ever realises that a short park is going to stretch into years before it is out again!
    • I know in Australia you'll definitely get above 30c. Parked in the shade in Summer you'll be above that. 😛 But in cooler climates, you might get that warm driving on the highway for a bit, but you'd never get to full heat temp. I'll try and find some of my historical tyre temps between Aus summer and winter (be aware immin the warmer area of Aus too.)
×
×
  • Create New...