Jump to content
SAU Community

Recommended Posts

It was actually in Perth, and it was a clubbing area so parking are really really hard to find or gonna cost like 5 beers to park the car at the pay parking area. :D I could have refund but I needed a new battery anyway so no harm to my hip pocket :D

Nah, I was just saying that IF you didn't need the battery :D That would actually be a good way of getting out of it :)

I wrote a letter when I was stopped for 30 seconds in a no stopping zone, I didn't get out of it. However my partner's car broke down, he moved it somewhere he wasn't supposed to for a few days, copped a few parking fines, wrote a letter and had them pardoned. Not much he could do when the car wouldn't move.

Usually if you can provide a towing recpeit and similar - you can write a letter and the fine/notice will just be passed off.

I've had fines struck that was a few times over the years without issue.

However if you are just stopped there, you ain't a lot of room to move on that one.

Sucky situation but I think the wording is, "no standing" meaning you can't be stopped there even for a second in the car, and "no parking" where you can be stopped but must be in the car with it on...

I pulled over to a no standing zone so I could get a look at my GPS and I had a cop come up to my window telling me to move my car or he'd fine me...was pretty fair of him but tight to be doing that over 30 seconds of stoppage, it's not like I couldn't move in the scenario that space is needed...

^^ That's the difference between no standing and no parking. No standing often is set because stopping there would obstruct traffic or view of traffic, both of which are safety issues. (Rather than inconvenience issues).

I got done for stopping in loading zone at Stud Park while I was in car and just picked up my wife as she came outside. Only stopped for about a minute.

The stupidest story of a parking fine being issued was about 8 years ago in Burke Road, Camberwell the parking inspector fined an ambulance for being in a no standing area.

  • 2 weeks later...

I got done by the Maribyrnong safety cam for waiting for a person leaving their parking spot.

Apparently if I was waiting for longer than 90 seconds then it is considered Double Parking, eventhough they clearly can see that i ended up parking on the spot I was waiting for. i've never heard of this before.

Can anyone tell me whether that is the law everywhere else or just the shitty marribyrnong council by-law?

cheers

note: my strategy is to ask for a warning if it is only their by-law as I 'm not aware at all

What about stopping under a sign then getting out to read the bloody thing to see if it is OK to stop or park?

Sometimes they have so many signs and so many with tiny writing etc that you can't really read it safely whilst at a moving pace. You really have to stop so you aren't blocking traffic, then get out and have a look before deciding if you can stop/park or not. If I got booked in that situation I would be PISSED off.

That's what happened to me the weekend before (just get the infringement notice today). I pulled over to an empty parking spot and looked up at the sign. When I saw it was a 'Loading zone', I moved off straight away. I didn't get out of my car, and the time the car stayed static is only a few seconds. However, according to the Safety Road Rules: http://www.austlii.edu.au/au/legis/vic/con...09208/s179.html, "A driver must not stop in a loading zone ...". Am I not allowed to 'stop' in order to read the sign? I'm going to write a letter to explain the situation. Yup, it's with Maribyrnong Council.

It's ridiculous that they term these "safety" cameras to try and justify them having a necessary impact on the preservation of human life...shouldn't it be "inconvenience" camera instead? As far as I can tell the only threat it poses is a loading vehicle unable to park where it normally does...do these delivery drivers have a reputation for going postal when they discover a full loading zone?

for anyone who got done for "double parking" while waiting for a car to leave a parking spot, according to this link http://www.austlii.edu.au/au/legis/vic/con...09208/s189.html, as long as the driver ends up parking, it is not double parking. it doesn't say anything about 90 seconds time limit.

I hope that helps anyone got done for double parking.

Marribyrnong council have been on ACA and Today Tonight in relation to these cameras... ...and they always ask if they are just for raising money... ...Which it seems to me like they are...

Here's the Vic Roads site for loading zones and what Marribuyrnong council say their laws on the loading zones are... ...Sadly it looks to me like the fine will stick under the Vic Roads laws... ...But I'd still try and fight it if I was you...

They also say on their site here that the cameras will get you while you wait for someone to come out of a parking space... ...Which I feel is total crap...

People double parking is a real pain along Kingsway, Glen Waverley. It blocks up the whole road all the time. I normally just move people on but those who are there picking up food etc and just leave car for sometimes 5 minutes deserve a fine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...