Jump to content
SAU Community

Recommended Posts

all stock, raise the boost on the 32s rb26 and it should be a different story. cant do much with na =(

Oh buddy, theres pleanty you can do!

VQ35HR, 6 throttles with tuned length intake runners, decent mandrel bent headers, high flow exhaust, aftermarket ecu with VVT control. = 360 - 380Hp depending on quality of execution? :)

Edited by chad bob

I was actually hoping that the v35 will do better. Again the brakes seems to be fading after 3 laps just like in another clip where the v35 went against some rx8s and 350z.

Yup!... That's why I love this clip.
Oh buddy, theres pleanty you can do!

VQ35HR, 6 throttles with tuned length intake runners, decent mandrel bent headers, high flow exhaust, aftermarket ecu with VVT control. = 360 - 380Hp depending on quality of execution? :O

http://www.350zmod.com/Jenvey-Individual-T...tb-350z-g35.htm

Unfortunately the cost to power gains ratio is far higher than FI

Oh buddy, theres pleanty you can do!

VQ35HR, 6 throttles with tuned length intake runners, decent mandrel bent headers, high flow exhaust, aftermarket ecu with VVT control. = 360 - 380Hp depending on quality of execution? :)

if u had alot of $$$ that is. the amount spent on making an NA to 360-380hp, would be better spent to FI the car. :P

http://www.350zmod.com/Jenvey-Individual-T...tb-350z-g35.htm

Unfortunately the cost to power gains ratio is far higher than FI

and also from what i meant was...without spending a single dollar *maybe just a manual controller* you raise the boost of the 32 it will beat the v35 with ease. with the NA you cant do much...well nothing at all really if you werent going to spend any $ on it.

I was actually hoping that the v35 will do better. Again the brakes seems to be fading after 3 laps just like in another clip where the v35 went against some rx8s and 350z.

What Clip?? I wanna see... post it. I always love watching our cars do battle. There isn't enough of it.

and also from what i meant was...without spending a single dollar *maybe just a manual controller* you raise the boost of the 32 it will beat the v35 with ease. with the NA you cant do much...well nothing at all really if you werent going to spend any $ on it.

Yeah you got a point mate but seriously, you're comparing Turbo VS NA... Of course a few tweeks here & there will turn the tables for the R32...

My point was that (despite the massive head start lol) a heavy stock NA-Rear-Wheel Drive 350GT was able to beat a lighter stock 4-wheel-drive R32 GTR V spec lap for lap... which deserves a thumbs up. :P True?

If any of you guys have any more Hot Version or Best Motoring clips of our 350GTs can you point me to them... Thanks.

Yes you can get more gains from a turbo motor by just winding up the boost BUT a well tuned NA is so different and sounds so awesome!

You can't go past the sound of individual throttles at full noise and the lumpy idle with a set of high duration cams is just too nice. I also think that completing the mods that I mentioned earlier would be on a par if not cheaper than a turbo / supercharger kit.

If the track was empty I think the R32 would have done a faster lap time than the V35. He was simply stuck behind him a few times.

Tyres, drivers, condition of vehicle, etc would also play a part. The R32 is 15 years older.

In any case, slightly disappointing result for the V35. Stock vs stock vs stock i thought it would be at least a little bit closer to the other cars.

Gotta agree with Brad as I was kinda disappointed as well seeing the v35 so far behind the imprezza and lancer..... was hoping to be much closer although those are 4WD cars.

If the track was empty I think the R32 would have done a faster lap time than the V35. He was simply stuck behind him a few times.

Tyres, drivers, condition of vehicle, etc would also play a part. The R32 is 15 years older.

In any case, slightly disappointing result for the V35. Stock vs stock vs stock i thought it would be at least a little bit closer to the other cars.

Yeah, and the TS version is like $6k, seriously why bother?

Exactly. 6k is the US price just for parts. Add the rest as well as tune and supporting parts and you've gotta be nuts to build an NA V35. Or etremely rich and don't mind losing money.

Yes you can get more gains from a turbo motor by just winding up the boost BUT a well tuned NA is so different and sounds so awesome!

You can't go past the sound of individual throttles at full noise and the lumpy idle with a set of high duration cams is just too nice. I also think that completing the mods that I mentioned earlier would be on a par if not cheaper than a turbo / supercharger kit.

i understand where you're coming bud, nothing better then pure NA sound. but like i said what i meant was *without spending any money* all that the 32 has got to do is the boost up. na no...

individual throttles....mmmmmm :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kittens in first to claim dominance of the residence, then puppies later From past experience, the other way around can be problematic to say the least  Those weird "Dobby looking"  little kittens are not cheap....LOL
    • At least yours have parkour down pat. One of mine will still trip over his own shadow and fall over... He's a special type of cat... Ha ha ha
    • The question then becomes - was there any fluid coming from that hole before you did the rebuild ?    You may not have noticed, of course.   Depending on how you did the rebuild, the possibility has to be considered that somehow (cleaning ?)  fluid entered that hole and is now being 'forced'  out by small movements of the proportioning valve.   From the factory, there's actually a small rubber plug in that hole but with age and under-bonnet heat it's quite common for it to 'go missing'.  That rubber plug is designed to allow the venting process but also to prevent 'stuff' getting to the area (prevent corrosion, etc).   The plug is also not available as a spare part AFAIA. Personally I wouldn't race and buy a new master just yet but keep an eye on the area to see if the 'leak' continues.   If you're concerned about brake fluid damaging nearby paintwork, cable tie a piece of suitable absorbant material over the hole and remove/monitor occasionally.    Operation of the proportioning valve and the brake master itself won't be affected, but also keep an eye on brake fluid level, of course. In terms of a new master, the genuine part is getting expensive, unfortunately.  Amayama is showing AUD900+.   I was searching recently and there's an aftermarket part available from Japan made by 'Parts Assist': https://zenmarket.jp/en/yahoo.aspx?q=BNR32%2bBM50&p=1 Whether it's any good I have no idea, although in my experience Japanese aftermarket stuff is pretty good quality-wise.   The above site allows overseas buyers to purchase stuff more easily from Japan but there are fees and shipping costs, of course.   The original Japanese seller page is here: https://auctions.yahoo.co.jp/jp/auction/p1197401228 Copper/Nickel is fine but I still prefer bundy tube and it's also cheaper.
    • Your chihuahuas look weird!
×
×
  • Create New...