Jump to content
SAU Community

Recommended Posts

...obviously by accident.

Turns out Ive purchased a stolen vehicle. :nyaanyaa: Fantastic, I found out yesterday

Very long story, 16 weeks since it was seized and 6 months since I bought it, Ill cut it down to a paragraph.

I did all the checks before buying, I dont have the full story, but looks like its been plate swapped. I bough it from NSW (of a legitimate car sale website) and brought it back to SA. Car was seized when I went for ID check, hasnt been seen since.

Highly doubt the last owner knows it stolen (NSW)

NSW law states, that 'buyer beware', all checks should be done before buying (I did) and that buyer takes all responsibility to ensure the car is not financed, roadworthy condition and not stolen.

SA lat states, that "Generally if a vehicle is stolen the true owner will be able to recover it and the purchaser will have to recover the price paid from the seller, even if purchased from a dealer." Taken from the 'Vehicle Securities Register'

I have two options,

1. try and get this through the SA courts, take it to small claims, according to legal aid (SA) its a piece of cake, no problems.

2. Prove that he guaranteed me the car was not stolen, I have some paper work, Im currently seeing if this is enough.

Has anybody ever had this happen? Or similar? Any help is much appreciated, im open to any idea.

Edited by JiN_MaN
Link to comment
https://www.sau.com.au/forums/topic/329776-buying-a-stolen-vehicle/
Share on other sites

sadly your only real course of action is to recover the cost of the vehicle from the seller. my advice is get onto it sooner rather than later. and if we are talking $20K+ then I would get some paid legal advice too.

Car value was just under 6k, so small claim court.

NSW law gives me no hope of getting anything from him, unless he knows it was stolen. Which Im 90% he doesnt.

Serious that doesn't sound correct, of cause he is not going to admit to knowing it was stolen.

That's really crap mate. I would be ringing REVS or whoever you used to check it out and asking them what their policy is if you were to use their service and the vehicle found later to have finance or similar. If they say there system is accurate or similar then let rip on them.

by the sounds of it, if you did a check based on the rego details then the VIN number would've had to have been different on the info to the one on the actual car. that would be the only way that a check would've shown that the car was fine (rego number wasn't stolen, but vin number was).

also don't expect to keep the car without having to pay more money. i know of a few incidents that have ended badly for the buyer of the car. 1 is a guy who bought a car that had been stolen from a car yard by an employee. he then was selling it as unregisterable but after looking at all the paperwork the guy thought that it seemed as though it would be registerable. went to register it, found out that all the numbers on the car had been duplicated and there was a car down in nsw with all the same numbers, car got impounded, went to court and is currently paying off the car to the car yard, as well as his loan for buying the car off the dodgy guy.

another one is a guy who bought a car that had had 3 other owners in the past 6 or 8 weeks. first owner had payed for it with a dodgy check and had taken it straight to the auctions to sell (had no intention of keeping it). next guy bought it from the auctions cheap, could've done a vehicle check and it would've been clean as he bought it before the check bounced. he bought it to sell and make a profit. he sold it in about a week. next guy bought it, got pulled over for an RBT and was told that the car was under investigation in a fraud case. he then sold the car cause he didn't want anything to do with it. next guy bought it, had it for a few weeks before it got impounded until it went to court. court found in favour of the original owner and he got the car back but did a deal with the latest owner to sell the car to him cheap. so in the end the last owner was out of pocket an extra few thousand dollars. i also have a feeling that all the revs checks came up clean on this car, because the car wasn't technically classed as stolen.

either way, after hearing all these stories it's made me much more wary when buying cars. if i was buying another car i would do a revs check but also take all the numbers to the police station to get it checked through their system before buying.

Usually checks I did was REVS and RTA check,

Plates had been cut out of the car and replaced with unstolen plates. So all details on car match the rego and the rego was for an unstolen Nissan Skyline.

Anything people have to say keep going. Any suggestions people have I will look into as far as I can.

Edited by JiN_MaN

Did you pay the $14.10 for the certificate ?

From the REVS website:

For a fee of $14.10 a REVS Search Certificate, which gives you conditional legal protection against repossession due to the previous owner's unpaid debt, is available to you for purchase online. You can also purchase a certificate from the REVS telephone service on 13 32 20 Monday to Saturday. Telephone service hours are, weekdays from 8:30am to 5pm and Saturdays from 9am to 2pm.

I didn't pay the money for the certificate, I simply rung up and and checked all details. The certificate doesn't cover against a stolen car as far as I know only against repossession from finances owning.

Also I was pulled over soon after having the vehicle back in SA and the police checked the car, did their stuff on the computer and sent me on my may, no questions asked.

Edited by JiN_MaN

How do they know it was stolen as opposed to a numbers swap to get an uncomplied car onto the road cheap? They would have cut out all the old identifying tags to replace them with the new ones wouldn't they so they would have no way to tell what the original identification of the car was?

yeah that's what gets me. if all the numbers were good enough to not show any irregularities during a rego check, how did it then get found to be stolen once you owned it? obviously there was a number somewhere on the car that didn't match the others.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...