R33 S2 Tomei Poncams

[josh.s]

I have these Poncams for sale. They are for a series 2 R33. Poncams bolt straight in, no solid lifter conversion required. I bought them from Nengun brand new 6 months ago and now my plans have changed so they are no longer needed. They are brand new.

$700

Postage available at buyers expense.

Call or text me (Josh) 0409 064 864 or email [email protected]

Cheers.

[johnbarry88]

might wanna put some specs up will help with the sale!

[josh.s]

256deg duration and 8.5mm lift.

[wolverine]

Late series 2 with the R34 CAS?

[75coupe]

yeah which CAS are they to suit? early or late R33 series 2?

[josh.s]

When I bought them from Nengun there was only an option for Series 1 or 2 so they'd be for later Series 2 when the sensor changed as that's the only difference between the S1 and S2 Poncams.

Edited July 26, 2010 by josh.s

[josh.s]

Bump.

[75coupe]

part number perhaps? just to be sure which ones they are

[r32/4skyline]

what work would need to be done to make these work in the 33 motor? if nothing i would be interested in purchasing these

[rad100]

i just fitted s2 poncams to my rb25det, and all you need to do is buy a r34 neo cas and re-wire the plug!

[josh.s]

Bump

[josh.s]

part number perhaps? just to be sure which ones they are

They are definitely series 2, I had to buy a late model sensor to fit them, but never got around to actually putting them in.

Still for sale.

Edited August 11, 2010 by josh.s

[Krishy]

so for these cams to work in a Series 1.....i would have to get a R34 NEO CAS and get the workshop to rewire it?????

[NYTSKY]

What is the part number? If it ends in 020 its for series 1 050 for series 2.

[josh.s]

so for these cams to work in a Series 1.....i would have to get a R34 NEO CAS and get the workshop to rewire it?????

Hey champ, I have the correct CAS for it that I can include for a bit extra. It's only 4 wires so it only takes a few minutes to wire up.

To everybody asking about the part number there is only one part number listed on Nengun for an RB25 and it ends in 20. After that it asks you to choose which series you're buying for. I will say it again, they are for a SERIES 2 R33 SKYLINE so pleeeease stop asking. Just in case anybody missed it the first time around:

R33 Skyline Series 2 Tomei Poncams 256deg 8.5mm lift. They are for the late series 2 R33 cam angle sensor which is the same as the R34 sensor.

If you STILL don't believe me, then you can request closer photos, but only if you think you might actually buy them. I'm not wasting my time if you're not genuinely interested...

[NYTSKY]

020 is series 1.

[josh.s]

Well I have no explanation for that as I have a Series 1 CAS on my car and it is a different fitment to what the Poncams would accept. I bought a Series 2 CAS and it was the correct fit.

These are still for sale. I need these gone as the box is just gathering dust.

[josh.s]

Still for sale.

[josh.s]

Seriously need these gone now. $550 plus postage and they're yours.

[josh.s]

Bump.