Jump to content
SAU Community

Recommended Posts

Hi there,

Im looking & Interested to buy a Nissan Stagea

If C34 Models (Preferred):

- Manual

- Dual Sunroof

If M35 Models (Preferred):

- Dual Sunroof

- Full Leather

*All with under 120,000kms.

*Price Budget Under $25k.

*Mods Or Stock.

If you have one for sale, let me know. Thanks for your time. :D

post-4840-1280142061_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/330432-wtb-stagea/
Share on other sites

If you want to save some money, mine is for sale. 124000kms genuine (I have auction papers. how many others are genuine kms?).

The price is low because I imported it myself so I paid a lot less than others originally (nothing wrong with it - was auction grade 4), also I want it sold fairly soon. I've owned if for almost 2 years and it is very reliable.

$15,499 - see my sig for the links to the 'for sale' thread and also the ad on carsales.

Link to comment
https://www.sau.com.au/forums/topic/330432-wtb-stagea/#findComment-5369866
Share on other sites

If you want to save some money, mine is for sale. 124000kms genuine (I have auction papers. how many others are genuine kms?).

The price is low because I imported it myself so I paid a lot less than others originally (nothing wrong with it - was auction grade 4), also I want it sold fairly soon. I've owned if for almost 2 years and it is very reliable.

$15,499 - see my sig for the links to the 'for sale' thread and also the ad on carsales.

Nice Stagea, but unfortunately im located in Sydney NSW and im

looking with the same state. But thanks for your offer.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/330432-wtb-stagea/#findComment-5371231
Share on other sites

Sorry guys, forgot to mention Location must be within Sydney NSW area. cheers

Hi,I have imported a RS260, complied ready for delivery. I import this one for a friend who wants to modify his rs4 into GTR spec. The tuning people plainly tell him to get an RS260 Autech.His girl friend wants to get married before upgrading the Stagea thus is available at 27500. engine is stock, Ohlins/Mine coilovers,series 3 gearbox,s/s cat back twin tips exhaust,built in sub and amp on a raised rear floor,flip down Alpine DVD, Zeus body kits etc,etc plz check carsales.com for details. we can re-impurse your air fare from Syd to Melb.

call Alex on 0433 878905 fro further details

cheers

Link to comment
https://www.sau.com.au/forums/topic/330432-wtb-stagea/#findComment-5371855
Share on other sites

Talk to Ben or chris at northshore prestige motors. I got my m35 off them. They got dual sun with leather there. Mine is an rx got it for 18k. Great blokes, and I reckon u can haggle them down a bit aswell.

Link to comment
https://www.sau.com.au/forums/topic/330432-wtb-stagea/#findComment-5375754
Share on other sites

  • 5 months later...

hi mate,

i've got a 2001 m35 for sale. asking price is $16,999.

i'm in sydney, (green valley, 2168) so if you havent found one yet please let me know.....

http://www.skylinesaustralia.com/forums/topic/352669-2001-nissan-stagea-nm35-250t-rs-four/

give me a call and we'll organise a meet.

Thanks

Stefan - 0433 99 44 53

Link to comment
https://www.sau.com.au/forums/topic/330432-wtb-stagea/#findComment-5657047
Share on other sites

  • 2 weeks later...

Hi

I have a 1996 (October) auto RS4 C34 4WD Turbo Days Edition. It will be 90,000 km soon and runs well. I love this car. The Days edition has more options and upgraded suspensions. The car is in north Queensland but I would drive it down to Sydney for an extra $350-$400. I am asking only $8,600 because I don t have much time left to sell it , I m international. It s a great opportunity for a Stagea in this condition.

Dual power sunroof, self booting rear door, power windows/mirrors, very recently upgraded audio (new CD/usb/mp3, new quality speakers), AC/climate control, new tie rod ends, new shocks, new breaks, new (quality) battery. That s for the main features.

No accidents, the engine and the turbo run very well (all standard). Comes with rego until October, roadworthy, service history, invoices. Service and certificate already booked on Monday anyway...

The body is not immaculate (some small bumps from tree branch and a paint mark) but overall ok. I have owned it for 3 years and am the first owner in Australia. Original contract available.

If interested or willing to see pictures feel free to message me or send a mail to [email protected]

G luck making a choice!

Cheers

Edited by zenpace
Link to comment
https://www.sau.com.au/forums/topic/330432-wtb-stagea/#findComment-5677777
Share on other sites

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...