Jump to content
SAU Community

Recommended Posts

Hello all,

It has come time to work out the fuel and ECU requirments for my 30DET.

Its a built 30 with oversized valves and a port job with a 35/40 straped on the side etc etc,

I have had a search around and cant find and defenant answer to my questions. Im looking for a single intank fuel pump to support upto 600hp at the rear wheels in a R33 gtst. The engine and turbo combo wont make much over 400kw at the rears if that but it would be nice to have abit of head room with the pump.

I have looked into the bosch 044 but have read about a few other people making 350 - 400kw at the rears and pushing the pump to its limits but have also read about other people running almost the same setup as mine and not having a problem making that sort of power.

Onto injectors, Has anyone had any experiences with Siemens Deka 850cc injectors?

Im also looking for an ECU to run the thing, I have been looking at the Power FC but am open to whatever you guys have had experience with and recomend.

It needs to run the 30DET that will have a front mount, large injectors,big turbo, big cams (no VCT) Budget? There is no budget at the moment so please list anything and everything you recomend =)

Cheers,

Jack

Link to comment
https://www.sau.com.au/forums/topic/330893-fuelecu-and-injector-advice/
Share on other sites

Vipec ecu, stock size pump feeding a 3l swirl pot then a bosch 044 or two if ur worried about it, then into a twin entry fuel rail to keep pressure at the injectors more even.

Run a fuel cooler on the return line so when not on boost all that fuel going through the hot fuel rail and back to the tank constantly gets a chance to cool.

Havent tried those injectors.

I was running sard 800cc's with a single 044 with my last GTR rb26 T04Z making 419kw with no issues.

And on a side note because ur budget is not an issue u can build my new car aswell :D

ECU well it's whatever floats your boat though a powerFC will do it just fine in the future if you want REAL data logging look at a MoTeC

Injectors well i wouldn't go past injector dynamics the ID1000's would suit nicely

Fuel system start all new lift pump 040 to surge tank 3L is good the two 044's feed both sides of the rail

My Opinion (Done lots of tuning) :

1. Vipec V88 - Lots of features, then some, and plenty of logging \ inputs \ outputs.

2. I have a nismo 275lph intank pump. Stock Fuel rail, and 555cc injectors. The Nismo pump is rated at 275lph at 80psi. Which is heaps. I'd say enough for 400rwkw. 180lph was enough for me to just touch 300rwkw and start running out of fuel. It also drops straight into the stock position, you absolutely do not have to modify a thing. Touches the bottom of the tank too. EXTREMELY quiet.

3. Injectors - Whatever the biggest Nismos you can get. If they make bigger that 777cc then get them. If not, not sure on what else. Aim for a 4 hole spray pattern, and something that bolts in easily. They all do a good job. The bigger the better incase you decide to use E85.

Edited by The Mafia
The bigger the better incase you decide to use E85.

+1

ECU: Haltech, MoTeC, Vipec (+1 for asking your tuner). I wouldn't go Power FC if you have the cash - they are getting on and lacking in features, resolution for maps and data logging.

Thank you for all your advice. If i can i want a single intank pump and thats it, Its not an option to put a swirl pot in the boot,however may be an option if any one makes one to bolt under the car near the tank somewhere. Ill be looking into the nismo pump first though.

Ill have a look into the injector dynamics and nismo injectors too

cheers,

Jack

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Mixing things up - installed some leather recaros to match the leather seat covered rear seats. Interior looks pretty schmick now except for some slight wear on the steering wheel which I will monitor and address if it becomes worse or actually noticeable!  
    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
×
×
  • Create New...