Jump to content
SAU Community

Recommended Posts

How to make a little bit of money out of motorsport? Start off with a LOT of money.

This is good quote and true some of the time but people like Peter Sauber to name but one didn't do half bad...

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

i believe it's: "how do you make a small fortune in motorsport??? start with a large one."

plenty of examples of that. but yes plenty of people have made some nice money. bernie eccelstone is not exactly hard up for a quid...

  • 9 months later...

A little off the track but i have an opportunity through my work to get my car a little sponsorship to help me along.

Can anybody who is doing it tell me what you need to setup to take the money as far as business goes?

Just an ABN? Do you need to do tax returns etc? Any advice would help.

my brother won a competition through RallySportMag to drive for Mazda Australia in a rally down in canberra, while it wasn't technically paid, he was given a carbon fiber stilo helmet, RPM race suit, Mazda watch, bag and a few other goodies....also got a few drive days with Rick Bates....brother to multiple Australian Rally Champion Neal Bates.

http://www.carsguide.com.au/site/news-and-reviews/car-news/a_step_up_to_triumph?from=ms

for memory the worth of prize was around $2000.

A little off the track but i have an opportunity through my work to get my car a little sponsorship to help me along.

Can anybody who is doing it tell me what you need to setup to take the money as far as business goes?

Just an ABN? Do you need to do tax returns etc? Any advice would help.

I don't think its necessary until its an amount that attracts the ATO's attention (IE more than $10,000).

Our rally team this year landed a few cash paying sponsors and we looked into this to see if we could write off some of our expenses.

Ive spoken at large with my accountant about options, but nothing was really worth while and as I wasn't really carrying out a business (trading in anything other than good will of advertising), setting up a company/getting an abn would just be a costly exercise for no benefit.

I don't think its necessary until its an amount that attracts the ATO's attention (IE more than $10,000).

Our rally team this year landed a few cash paying sponsors and we looked into this to see if we could write off some of our expenses.

Ive spoken at large with my accountant about options, but nothing was really worth while and as I wasn't really carrying out a business (trading in anything other than good will of advertising), setting up a company/getting an abn would just be a costly exercise for no benefit.

Thanks for that. So do you just get transfers, cheques etc to you personally? Just wondering how the sponsers justify the cash outlay from their side.

I think that the ATO will look at the value for money the company is getting for their sponsorship dollars, ie the exposure they'll get, and the relevance to their business. For example, I only do club events, and my business deals with mining companies. Plastering my company name all over my rally car is unlikely to attract the attention of any of my clients (who all live 1000km away from where I'm likely to be competing anyway). It would be a very long stretch to try and claim thousands of advertising dollars against my rally car.

I'm sure I'd get away with it for a while, but I wouldn't want to have to explain it to auditors.

On the other hand, if my business was a tyre shop, panel beater, engine builder etc, then a rally car would be a great way to lift the business profile.

Another thing to remember is that the company will have to think long and hard about how you behave whilst driving your car with their logos all over it. Imagine the PR if a car they sponsor is perceived to be behaving badly in public.

The value of the advertising is a matter of opinion, pretty sure the ATO don't check the 'value' of the advertising.

Agreed.

The value of the advertising can always be argued. You may take clients for hot laps, use the car as a static display at events etc so I don't see the issue with it.

All above comments are valid, however and I can kinda see warps perspective.

If you were self employed and pouring considerable amount of money into sponsoring your own habits, the ATO might have the view that your purely siphoning money from your business to avoid paying personal income tax and keep your taxable income down. Then they might come after you, but it would have to be an ill proportionate value in relation to your business turnover.

But to be quite frank and if you have a good enough accountant I highly doubt this would ever happen as the ATO is understaffed and flat out chasing tax avoiders.

If you were self employed and pouring considerable amount of money into sponsoring your own habits, the ATO might have the view that your purely siphoning money from your business to avoid paying personal income tax and keep your taxable income down. Then they might come after you, but it would have to be an ill proportionate value in relation to your business turnover.

lol, if they did this probably 80% of cars in state and national competition would be sticker free overnight and no longer competing. just about anyone I know who pours decent coin into their race cars does it through their own business as advertising expense for their business. everyone from old mate with a workshop running his alfa to another bloke who owns a cafe running his porsche GT3 cup car and everything in between. I'm sure plenty of small businesses put so much into their race car it ate all their profit and then some! not just would we have empty grids but the whole motorsport industry in aus would just about go under if ATO started cracking down on folks with small businesses putting cash into their race cars as a business expense. scary!

The value of the advertising is a matter of opinion, pretty sure the ATO don't check the 'value' of the advertising.

Ah for f***s sake why is everything taken so f***ing literally?

I used the term "Value" as a catch all term which I then went on to explain further. Correct, ATO don't give a stuff if you're getting value for money. What they do care about is that you're claiming $30k a year on "advertising" whereas you might realistically increase your turnover by $100 a year based on that advertising (if at all). Again, that alone won't necessarily raise any eyebrows, however if that $30k allows you to enjoy your hobby, then they will definitely frown upon you trying to claim it.

There's nothing wrong with businesses sponsoring motorsport, but claiming that the $100k a year your business pumps into your club racer is legitimate advertising and hence taxable, well, good luck with that one. I'm not talking about a car that will get national exposure in its category here. What I'm talking about is the typical club racer who wants to write off his racing expenses, even though the only people who are likely to see the car have nothing at all to do with his business.

Just because people get away with it doesn't make it right. I know I could easily syphon tens of thousands into a race car, but as I said earlier it is a stretch to claim that it is legitimate advertising. It all depends on how "creative" you want to be.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This is awesome.     
    • Thanks for the quick replies guys its appreciated. A small extension was welded onto the standard 6boost external gate pipe which you can see where the pipe goes from black to stainless just below and to the right of the rear housing in the first picture. Overall I would say the flow is pretty good other than 6boosts choice to come straight off the collector at a decent angle.. Not sure why I went with two valves, I originally replaced the stock twin bovs with the GFB when I had the twins on. When I purchased the EFR it came with the Turbosmart Kompact BOV so I figured that would be a better option than the stock EFR Bov. I don't believe the Turbosmart BOV is adjustable? When I get the spike and then sudden dip in boost pressure, the turbo speed does drop as well. Stock head size wise however I believe it has Neo Turbo springs and a Neo Turbo intake camshaft and an aftermarket exhaust camshaft in the vicinity of 260 degrees. We didn't try a different MAC valve, we tried two different ways of plumbing it and we also tried removing the mac valve entirely and just having the boost source from the turbo directly connected to the wastegate and it still spiked / dropped and exhibited the same behaviour. Standard R33 GTR 5 speed tansmission. I'm running a Haltech Elite 2500 and can provide some logs if you. I understand what you're saying in that it looks like an auto plot however no, it's still a manual and it just has a lot of torque down low, for all intents and purposes it's a very impressive street car. I've attached a photo of the quickbitz dyno plot which was when the only difference is I was running -5 twin turbos with a mac valve. As you can see theres a decent dip in AFRs between 125kmh and 135kmh. Our problem now is not that the AFRs are dropping, just the boost pressure is dropping, however it is evident in the same RPM range of the map, coincidentally or not.
    • What transmission are you running?  It's a bit tricky with the scaling, but at face value the power "curve" looks more like a "line" which is a bit odd... basically a lot more like a dyno plot I'd expect with a highish (compared to a factory auto) stall torque converter type setup. If this is running an auto then this kind of boost control challenge is definitely a thing, the rpm scale on the dyno doesn't reflect what the engine is actually doing (unless the dyno has access to the engine's ACTUAL speed electronically) and what you'll get is a big rpm flare up as the engine torque launches past the converter pump's ability to resist torque at that rpm, then as the converter starts picking up rpm it will kinda even out again and the engine rpm will pick up more steadily. The trick with this "flare up" is if it's kinda near the boost threshold for the turbo then the engine's airflow requirements to maintain the previous boost level will outrun the turbo's ability to supply that boost - so you end up with a natural flattening off, if not dip when that happens.   If you are running closed loop, or even tune the "feed forward" wastegate duty cycle to deal with that rpm spike then when the engine starts settling to a more typical climb you'll actually have a situation where the gate is "too closed" and boost will run away for a bit, then have to pull down again.      It's not trivial to get this perfect as most boost control systems are generally expecting more predictable engine rpm rates of change, but if you *know* that's whats going on then you can at least "accept your fate" and realise getting that area perfect is kinda chasing your tail a bit, and assume that if the rest is working sensibly and the spike/dip isn't completely uncontrolled then you should be good. Sorry if I've gone off on a tangent, but the dyno plot and boost control behaviour look a LOT like what I've seen tuning autos in the past. What ECU are you running? Could possibly be convinced into looking at logs if I get too bored this weekend haha.
    • A few things that seem a bit off here. - why is there 2 BOV’s?  - the turbo smart BOV on the compressor housing, is it turned up ALL the way? I have seen this become an issue on old man Pete’s car. It would push open and recirc, turbo speed would rise and the boost pressure would do weird things. - stock head? Does that include springs? - tried a different MAC valve? Is it plumbed correctly?
    • Photo of manifold showing gate location? I mean, it's 6Boost, so we probably shouldn't be worrying, but always wroth knowing what the layout is. Plumbed back to atmosphere? Or into the dump?
×
×
  • Create New...