Jump to content
SAU Community

Recommended Posts

Just wondering sometimes when i smash from 1st to 2nd i get a tramp (Tyres skipping before they grab traction). Is this bad for the car is it capable of damaging something? Whats the fix? ive lowered tyre pressure etc... I do have very stiff suspension.

Whats wrong with your other thread:

http://www.skylinesaustralia.com/forums/Ty...p;hl=axle+tramp

In that thread we suggested you read this thread:

http://www.skylinesaustralia.com/forums/Ax...p;hl=axle+tramp

There is heaps of info in that second link. I am yet to completely eliminate mine but have reduced it a lot.

From my experience it is worn suspension bushes that cause this issue, so when axle tramp occurs you are further wearing down these bushes. Not mention the extra strain on axles and diffs.

Edited by Harey

Of course its bad for the bloody car!

How to fix? Don't "smash 1st to 2nd"! Pump the tyres back up (for general road holding). And stiff suspension won't be helping at all (you don't get proper weight transfer onto the rear wheels).

Of course its bad for the bloody car!

How to fix? Don't "smash 1st to 2nd"! Pump the tyres back up (for general road holding). And stiff suspension won't be helping at all (you don't get proper weight transfer onto the rear wheels).

My axle tramp would occur with just power no hard changing gears with tyres pumped up and not stiff suspension. Its not that easy. But there is tonnes of info in that thread i linked above.

  • 11 years later...

Well, yes. They could be stickier or less sticky than previous. To cause tramp, it's more likely that they are more sticky rather than less. They could have a different sidewall stiffness and/or different inflation pressure.

Try a bit more and less pressure ans see which feels better. That might help tramp and make handling worse, so you may have to find a new compromise.

I have axle tramp. I will never do anything to get rid of it that will adversely affect the lateral grip of the rear end.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...