Jump to content
SAU Community

Recommended Posts

OK, sorry for the lack of updates, but work got in the way for the past few months, and seeing as it finances the project, I couldn't really say no.

BETTER SAFE THAN SORRY

Having seen a fair number of incidents at the track, and also being a requirement for the race category I plan to enter, I finally bit the bullet and went the full cage. Asking around the racers in WA, one name kept popping up for who does the best rollcages. Brad Stacy. Working for one of the top Race Workshops in WA, and also working from home, I got in touch with Brad, and explained my requirements. Brad was awesome to deal with, and having done dozens of cages before I felt confident leaving my car with him.

The cage took about 2weeks, which wasn't bad considering he was doing it in his spare time. I'm really happy with the end result, and would recommend Brad to anyone thinking of getting a cage done in WA :thumbsup:

http://www.bradstacyfabrication.com.au/

Enjoy the pics

PICTURES

X side bar

post-1397-0-15130700-1308619475_thumb.jpg

Roof X bars

post-1397-0-44112300-1308619493_thumb.jpg

Front view

post-1397-0-06255800-1308619509_thumb.jpg

Rear Cage

post-1397-0-85792900-1308619525_thumb.jpg

Cage Rear Strut

post-1397-0-74825100-1308619543_thumb.jpg

Cage Hoop Top

post-1397-0-53953700-1308619565_thumb.jpg

Cage Hoop Bottom

post-1397-0-78097900-1308619580_thumb.jpg

  • Replies 76
  • Created
  • Last Reply

Top Posters In This Topic

Great work Paul,

Good to see Brad sorted Cage out :thumbsup: .

Whats next dude,

new RB30 :rolleyes:

I'm leaving the engine as is for the time being, makes plenty of power. Likely conversion to E85 fuel though, which should improve response and up the power a bit.

was just wondering about this car just yesturday, how long until it gets back on the track???

Potentially it could go back to the track within about 2weeks, but in order to get everything ready to pass scrutineering it will take alot longer. At least I'm back working on the car again, so progress will be made :thumbsup:

  • 4 weeks later...

just getting my battery nerd on, what are you thinking of using?

you can get pretty powerful motorbike batteries, they already use them in race/drift applications anyway

I'm getting a Braille Battery, only weights 3kg :D

http://www.autocraft.au.com/braille/index.html

bit expensive, but that is pretty light, what one were you looking at? how many cca?

are you looking at the lithium ion technology?

depending on the cca you require i'd say a Deka Powersports ETX18L or ETX30L,

they are a AGM technolgy and should have plenty of power and they could even sit around for 6 months and still start the car.

Give Goodchild Enterprises a call and they should be able to give you a good price on one, even tell them Erik from Bitz sent you

  • 2 weeks later...
  • 3 weeks later...

stock cams will do 450rwhp wouldnt ever use that much grunt really in a track car, plus you would try to retain vct at any cost possible as it is a very good thing to have while tuning.

very clean car mate did you have a dyno sheet from the engine set up on page 1?

i was also supprised at the weight of the doors as well i have mine off at the moments and there feels like enough metal to make a charade out of them.

how much weight do you think you saved by stripping the wiring harnes out of curiosity?

Edited by kungpow

paul have you disabled the VCT to run the big cams?

looking to do this to mine but cant find out much about it.

Hi Tristan, I've got the biggest VCT cams I could find, Apexi 270degs. I think the VCT is one of the best parts of the RB25s. To be honest you'll struggle to find big VCT cams, so you may be stuck with disabling it.

very clean car mate did you have a dyno sheet from the engine set up on page 1?

I do somewhere, I will try and get a copy posted up.

how much weight do you think you saved by stripping the wiring harnes out of curiosity?

At least 10kgs, I have shopping bags full of it.

  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...