Jump to content
SAU Community

Recommended Posts

R32 GTR V-SpecII

Brisbane, QLD

Genuine R32 GTR V-Spec II, with Genuine Factory Fitted Nismo Body kit. Great car, first Australian owner. Very Loved. Serviced every 5000km and gearbox/diff every 20,000km. Always garaged and regular weekly maintenance. Never been used on a Track or Strip. Was used as my daily driver for over 3 years, But a Work Accident means I can no longer drive it. The car has a few Minor Mods all have been carried out by Godzilla Motorsport. It currently makes 310AWHP and comes with a copy of the dyno sheet.

$30,000

Please Contact

Ben - 0420 909 676

post-200211-12822007051152205642_thumb.jpg post-200211-12822004801349268924_thumb.jpg post-200211-12822005371673738462_thumb.jpg post-200211-12822005831291152812_thumb.jpg post-200211-1282200615796238763_thumb.jpg

Edited by R32 V-specII
Link to comment
https://www.sau.com.au/forums/topic/333560-bnr32-gtr-v-spec-ii/
Share on other sites

They did..

but, so I've been told they were weaker and some Jap owner removed them, and went to the orignals..

sorry to say but thats not correct they get taken and put on other cars or sold seperatly, brembo braked gtrs have taller discs and brembos are beater calipers which is way all of the rest of the gtrs had them(they are the exact same brakes as the 33 gtr) ,good luck with sale i,m not prepaired to pay $30,000 for an incomplete v-specII though i am looking for one cheers anyway

Thats just what i was told by the importer when i bought it... so i dare say it was them that took the brakes, if they are as good as you say.

Does anyone know if there is a Letter or Number in the vin that i can look for to confirm that it is a V-Spec II. Have had a fast check done on it and it has come back positive.

When i had the fast check done it also came back that the Nismo kit was a factory option on my car.

Model code should finish with AA, also check for the poprivets that hold the build plate on make sure try are still the tamper proof ones, there are plenty easier ways to get Brembos than to change discs, calipers, and probably master cylinders on a car that relies on those brakes to set it apart from every other GTR....

Model code should finish with AA, also check for the poprivets that hold the build plate on make sure try are still the tamper proof ones, there are plenty easier ways to get Brembos than to change discs, calipers, and probably master cylinders on a car that relies on those brakes to set it apart from every other GTR....

I checked those thinks today while cleaning it, the Model code does end in AA and it seams to have what i would call tamper proof rivets.

Is there anything else to prove its genuine?

i have to sell this car... its upsetting having a beautiful car like this just sitting in the garage, and being unable to drive it...

Edited by R32 V-specII

Now i've had 3 SCAMS off car sales..

So for SAU members i'll be dropping the price to $28,000, to help with a quicker sale.

Anyone interested please PM me and i can supply a full list of mods and any other car details.

Some of the bigger mods include:

Twin GT2860rs

700cc injectors

Coilovers all round.

and my fav, custom 3" stainless exhaust with Internal Mufflers and a Xforce Connon Muffler on the rear.

is it me or does the vspec sticker look way to high up..

we've already been through this... i've done all the checks and it is genuine..

i did have the boot resprayed a while ago tho, so the probable didn't put them back correctly..

Come on guys...

I need this car SOLD.

If your interested make an offer, i'm pretty open at the moment..

Please PM or call me i'll answer any questions you may have.

thanks.

As i keep getting told that it isn't a "Complete" V-spec II, through private emails.

I have now dropped the price to:

$26,000

To allow for the purchase of the Brembo's.. and to relocate the Sticker :P..

I have had over 20K spent on this car in mods, and can't afford to go much cheaper.

If you interested, please get in contact with me.

Not trying to hijack but differences are:

Wheels (also wider and larger rolling diameter)

Brakes

Rear Diff (ALSD)

Retuned ATTESSA

10mm lower suspension standard

Stickers

Rarity....

Given that there seems to be a shedload of V-Spec IIs floating around, I am pretty sure they have multiplied (and I have no reason to think or suggest mine is any more or less genuine than this car) however the 2 things that are the best indication (Model Code and VIN) say this is a V-specII, and they are harder to change than the brakes. I know that mine is missing the ALSD, again heard rumors of unreliability... To me this car is Genuine until a 1 owner car with complete history shows up with the same VIN.

Good luck with the sale, hope it goes to someone who appreciates it for what it is.

Thanks for the assistance. All the numbers do say that it is a V-Spec II.

Hopefully it can go to a good home, and to someone who knows what it means and not someone that has no idea.

Thanks

Ben

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GCG is a good company, they're a major distributor for Garrett in Japan as well.
    • Nah, OEM washer bottle and brake fluid reservoirs are fine I don't know what it is with the plastic that Mazda used, some plastics, like the washer bottle and brake fluid res are fine, and still look new after 20 years use, where as the coolant expansion tank, and PS reservoir, that I replaced with new OEM items when I first got the car, turned yellow and started getting brittle a few years later If the dirty yellow stained plastics didn't trigger me there wouldn't be an issue, but they did, much like the battery bracket....... Meh As for going back to work full time to support car stuff, nope, why, because I own a Mazda NC MX5, not a Nissan R series Skyline 🤣
    • I've never heard of CJ-motor, so can't advise you on them. I'd just go straight to GCG for a GCG highflow though. Seems no point to use a middleman. I'm somewhat surprised that the price on the CJ site is lower than the GCG retail price. Even though CJ would get a discount of some sort, you would hardly expect them to give up so much margin. Maybe the price is out of date? Having said that "I'd go to GCG"...when I did my highflow, I went to Hypergear. I did this https://hypergearturbos.com/product/rb25dethighflow/#tab-dyno-results with the R34 OP6 450HP profile. With the BB centre (extra $400) and intially with the standard boost actuator, but I eventually got him to send me the high pressure one when I got to the point of being able to actually use it. Ends up costing the same sort of money as the GCG highflow, but this is, of course, the turbo that I KNOW has a shorter length core and so moves the comp cover rearwards. The GCG apparently doesn't do that. My mechanic also swears by the GCG highflow, given that we have another turbo rebuilder who does something essentialy the same as theirs, using Garrett wheels. He says it stands up at really low revs and makes good power. I haven't pushed my HG highflow past ~240-250rwkW yet (should have a little more in it, but unclear how much) and it does have a fairly gentle boost ramp. OK, it's much better now that I have gotten my boost controller tuned up on it.  A lot of my earlier unhappiness was because I couldn't keep the wastegate flap as closed as it needed to be (including some mechanical issues). I'd still prefer it to boost up nearly as quickly as the stocker, and it certainly a bit slower than that. So maybe the GCG one is worth the first look (for you).
    • Ok thanks 🙂 I will higly consider this. Any "known" company for a good reviews and experience to send that off? Is that CJ-motor good one? Or go straight to GCG site? I need to use VPN to even find some of those "shops" let alone access them 🙂 
    • You can literally put in as much WMI as it takes to quench the combustion totally (and then back it off a little, obviously), and it will keep making more and more power. The power comes from the cooling effect of the water (and the meth) and the extra fuel (the meth, which also has massive octane). It is effectively exactly like running E85. One might be slightly better than the other, but they are damn close. But with either you can lean on the boost or the timing (or both) waaaay more than with just petrol and the results are similar. Here's the first thing I googled for an anecdotal bit of evidence. Can't access the attachment without being a gold member, but it is there for the getting if able to, or searched up elsewise perhaps. https://www.hpacademy.com/forum/general-tuning-discussion/show/wmi-vs-e85/
×
×
  • Create New...