Jump to content
SAU Community

Recommended Posts

thinking bout changing my wheels once again lol

Work VS-XX

18X9+30 fronts

18X10+25 rears

being second hand rims these arnt in the mintest condition. it has your usual minor scuff marks on the lip (no chunks or kinks at all). no buckle on the rim. perfectly balanced.

looking for offers of $1500 and above. these are for wheels only with no tyres. but if interested i can work out a price with you to have tyres included. fronts are running 235/40/18 and rears are 245/40/18 Maxis with 95% tread.

dont have decent pics of the wheels. will post individual pics later but these will do for now. perfect fitment for chaser as you can see. not sure how it will sit on other cars but fittment should be spot on for a GTST or GTT

IMAG0243.jpg

IMAG0215.jpg

IMG_0296.jpg

IMAG0205.jpg

ta

Ash

Euros are 5x114.3, im just more concerned of the offset and width. Thank you.

Cheers

think the offset is too low would need a fair bit of work knowing honda's

i always wanted these rims for my r34.

it will look sick on it. I need to try them on first ash.

who wants to buy my wheels? lol

these are sold pending payment. deposit taken today

but the wheels arent perfect. 3 of the wheels have very minor rash as mentioned and no chunks missing and one spoke has a little chip.

will update this when its either sold 100% or if buyer backs out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...