Jump to content
SAU Community

Recommended Posts

Specs

1990 skyline hcr32 Gts-t

-bn blister widebody kit (much lighter than stock skyline)

-r34 front conversion, r32.4

-sunroof

-5spd manual

-120,000ks

-reg till june 2011

-rwc can be suplyed. will need front upper control arm bushes

-drift gauges. water/oil pres/temp

-white face cluster

-drift deep dish stearing wheel.

engine:

- Hi flow turbo (less than 1500ks old) rebiuld by hypergear have recipts

- Tuned ECU- Remap. (CEFFIE tune)

- HKS pod. (and stock airbox)

- 42mm alloy radiator

- Kakimoto exhaust. ( not loud) had driven past heaps off police. they dont even look

- FMIC

Driveline

- Tein HA coilovers- hieght and damper adjustable

- Hicas lock bar

- extreme HD clutch.

- Front and rear cusco strut braces

- Work Vs xx

18x10 -12 offset rears (245x40x18) potenza re-01 (90%)

18x9 -4 offset front (235x40x18) (100%)new

the rest is stock. well kept engine. I just did a service. had its 100k service done in 08 and has done 16,000 ks since then. Im the 2nd owner. Iv looked after it well.

car is in great condition. Starts every time. never missed a beat.

always service 5000ks. (done last week) see pics. Lol

-Motul 4100 turbo light

-Drift oil filter

-Nulon anti freeze anti boil coolent

-NGK bcp6es .8 gap

making around 200kw at the wheels with plenty of room for more.

reason for sale

I want a motorbike.

so will part trade for

fzr250 zxr250 ninja cbr250 hyosong gt250. Or a cheap daily.

BAD

will need front upper control arm bushes. (probly be done by the time anyone buys it)

bonnet needs painting.

few large dints in roof. Just need to be poped out.

price: make an offer. Might get lucky.

$8,000 with out wheels

$10,000 with everything!!

post-52856-1282647593_thumb.jpg

post-52856-1282647612_thumb.jpg

post-52856-1282647626_thumb.jpg

post-52856-1282647672_thumb.jpg

post-52856-1282647707_thumb.jpg

post-52856-1282647828_thumb.jpg

post-52856-1282647856_thumb.jpg

post-52856-1282647894_thumb.jpg

post-52856-1282648019_thumb.jpg

post-52856-1282648062_thumb.jpg

post-52856-1282648148_thumb.jpg

post-52856-1282648207_thumb.jpg

post-52856-1282648259_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/334145-widebody-r32/
Share on other sites

Specs

1990 skyline hcr32 Gts-t

-bn blister widebody kit (much lighter than stock skyline)

-r34 front conversion, r32.4

-sunroof

-5spd manual

-120,000ks

-reg till june 2011

-rwc can be suplyed. will need front upper control arm bushes

-drift gauges. water/oil pres/temp

-white face cluster

-drift deep dish stearing wheel.

engine:

- Hi flow turbo (less than 1500ks old) rebiuld by hypergear have recipts

- Tuned ECU- Remap. (CEFFIE tune)

- HKS pod. (and stock airbox)

- 42mm alloy radiator

- Kakimoto exhaust. ( not loud) had driven past heaps off police. they dont even look

- FMIC

Driveline

- Tein HA coilovers- hieght and damper adjustable

- Hicas lock bar

- extreme HD clutch.

- Front and rear cusco strut braces

- Work Vs xx

18x10 -12 offset rears (245x40x18) potenza re-01 (90%)

18x9 -4 offset front (235x40x18) (100%)new

the rest is stock. well kept engine. I just did a service. had its 100k service done in 08 and has done 16,000 ks since then. Im the 2nd owner. Iv looked after it well.

car is in great condition. Starts every time. never missed a beat.

always service 5000ks. (done last week) see pics. Lol

-Motul 4100 turbo light

-Drift oil filter

-Nulon anti freeze anti boil coolent

-NGK bcp6es .8 gap

making around 200kw at the wheels with plenty of room for more.

reason for sale

I want a motorbike.

so will part trade for

fzr250 zxr250 ninja cbr250 hyosong gt250. Or a cheap daily.

BAD

will need front upper control arm bushes. (probly be done by the time anyone buys it)

bonnet needs painting.

few large dints in roof. Just need to be poped out.

price: make an offer. Might get lucky.

$8,000 with out wheels

$10,000 with everything!!

Link to comment
https://www.sau.com.au/forums/topic/334145-widebody-r32/#findComment-5424435
Share on other sites

sorry about the post above.....my i phone wouldn't let me type anything......had to wait to log on elsewhere

dont know how to delete the useless post of mine above...

I have zx600 96 model......12months rego ....after market pipe......

i ride this on my "L" legally here is S.A.....your aloud up to 660 on Learners bike now

very good condition.... i have picks but dont have the cord to post them, i can send pics through my i phone if your interest PM your number...

i tried to pm you mine but i cant cause im new here..

i use the bike everyday for work....starts first go everytime... even in the freezen cold..very reliable

Link to comment
https://www.sau.com.au/forums/topic/334145-widebody-r32/#findComment-5424466
Share on other sites

sorry about the post above.....my i phone wouldn't let me type anything......had to wait to log on elsewhere

dont know how to delete the useless post of mine above...

I have zx600 96 model......12months rego ....after market pipe......

i ride this on my "L" legally here is S.A.....your aloud up to 660 on Learners bike now

very good condition.... i have picks but dont have the cord to post them, i can send pics through my i phone if your interest PM your number...

i tried to pm you mine but i cant cause im new here..

i use the bike everyday for work....starts first go everytime... even in the freezen cold..very reliable

There is a fair chance ill kill my self on that. ha. but send me some info. Sounds interesting.

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/334145-widebody-r32/#findComment-5425638
Share on other sites

That is porn! If i can sell my 34 and I dont like the trades I have been offered I could be very keen unless your keen for a a 34 4 door and cash my way??

http://www.skylinesaustralia.com/forums/Fs...or-t335606.html

Link to comment
https://www.sau.com.au/forums/topic/334145-widebody-r32/#findComment-5432552
Share on other sites

That is porn! If i can sell my 34 and I dont like the trades I have been offered I could be very keen unless your keen for a a 34 4 door and cash my way??

http://www.skylinesaustralia.com/forums/Fs...or-t335606.html

swaps welcome.

Cheap car plus $$ my way

Or nice car up to $5000 cash your way.

Link to comment
https://www.sau.com.au/forums/topic/334145-widebody-r32/#findComment-5432715
Share on other sites

If you were in NSW i would be interested in swaps for my pulsar (http://www.skylinesaustralia.com/forums/00-Pulsar-Sedan-nsw-t333927.html) if you were keen. Looks like a pretty tidy car.

Just a tip I'm not sure on the restrictions for bike riders in vic but if it uses LAMS rules you need to be careful of which 600's you look at, some comply but a lot dont. That's how it is here in NSW anyway.

Link to comment
https://www.sau.com.au/forums/topic/334145-widebody-r32/#findComment-5432795
Share on other sites

hey man what mods are done to the motor? what size is the turbo looks bigger in the photo? cheers

The turbo is bigger (its been high flowed). Its hard to measure but it runs stock rb20 housings, closest comparison would be the gt2860rs

Motor? its stock unopened. List of mods are up there ^^^^^

Link to comment
https://www.sau.com.au/forums/topic/334145-widebody-r32/#findComment-5442904
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
    • OK, now we are ready to get started. You need to remove the air boxes on each side for clearance. The cover is straightforward, undo the clips on the top and lift the front cover out of the rest of the housing. If it is tight you can remove the air filters first. The rear section of the airbox is trickier. On each side you need to remove the Air flow meter wiring which is held to the airbox with a clip; you need to get behind the clip on 2 sides if you want to remove it without breaking it - unclip the harder side and pull on the clip with medium force, then unclip the easier side and it should pop out The airbox is held onto the intake hose with a spring clamp; you need to get a flat bladed screwdriver behind the spring on both sides and pop them outwards. When you have got them in the right unclipped place they will stay there and the airbox slips out pretty freely. Put a rag in the intake to prevent anything getting dropped in there, and also to prevent you seeing that the turbo seal is leaking oil (as they do). Then. The top of the radiator is held by a steel plate, it is secured by 2x10mm and 2x12mm headed bolts . Remove them and remove the plate Also grab the bushings that hold the radiator to the plate on each side so they are not lost!
    • Next, remove the upper and lower radiator hoses, both are held with a spring clamp. While you are under there, tackle the Auto Trans cooler lines.  Again both are held on with spring clamps, and as mentioned above you should cap them on the radiator side with an 8mm cap, and on the car side loop them with a length of 8mm pipe - this will stop you losing a dangerous amount of AT fluid during the rest of the job If you've been meaning to add a sender for AT trans temp, this is a great time to do it; put a sender fitting into the passenger side line as that is the inlet to the cooler/radiator.
    • Next you need to remove the intake duct (as with pretty much every job on these cars), it is a series of clips you gently remove with a flat bladed screwdriver. They do get brittle with time and can break, and I have not found a decent quality aftermarket one that fits (they are all too soft or flimsy and don't last either) but the nissan ones are a couple of bucks each (ouch).  Once the clips are off (either 8 or 10, I didn't check) you lift the intake duct out and will see the reservoirs Undo the line into the radiator side cap (some bent needle nosed piers are awesome for spring clamps) and then remove the 4x 10m nuts that hold both in place.  I didn't get these pics, but remove the line under the radiator reservoir (spring clamp again) then remove that reservoir. Then you can get at the intake reservoir, same thing, spring clamp underneath then remove it. BTW This is a great time to put in a larger (+70%) combined reservoir that AMS makes..... https://www.amsperformance.com/product/q50-q60-red-alpha-coolant-expansion-tank/ They also make an Infiniti branded and part# version if that is your thing
×
×
  • Create New...