Jump to content
SAU Community

Recommended Posts

  • Replies 79
  • Created
  • Last Reply

Top Posters In This Topic

Yeah it's a typo it's $1963 there is a cost for the internal gate housings as the Twin Scoll external gate version that i was looking at getting only came to $1770 posted. For $1963 you could probably find one here but make sure it's the full 60mm turbine wheel version not the cropped 56.5mm version.

Stao @ Hypergear can do 2871/3071 CHRA-based highflows for factory RB25 turbos .. though if you already have a 2530 probably not an option (unless you still have the old turbo floating around).

They aren't as efficient as the Garrett version with the proper Garrett housings. But you pay the price difference. The HKS Turbine housings are even better again.

Edited by D_Stirls
Stao @ Hypergear can do 2871/3071 CHRA-based highflows for factory RB25 turbos .. though if you already have a 2530 probably not an option (unless you still have the old turbo floating around).
They aren't as efficient as the Garrett version with the proper Garrett housings. But you pay the price difference. The HKS Turbine housings are even better again.

hence now i have decided to go with a Garret unit

Just keep the factory one that you have taken off and swap it back. Won't take more than a couple hours on a GTT and after you have done it a couple times you be able to do it in under 90 minutes.

With my car i have a complete stock engine setup so if i get defected with the built engine i'll just swap the whole engine over, a lot easier than taking cam out, swapping injectors, reattaching all the emissions stuff and standard IAA.

Edited by D_Stirls

Yeah there's a few things you have to do in terms of Transport SA for this to work but i'll discuss this with you in person rather than on a public forum Are you on my FB?

EDIT!!

Just added you

Edited by D_Stirls
.63 rear housing should see me 300rwkw on 25??? mind you its going to be internal gated

On pump i would say no, My HKS3037.68 was seeing around the 270 mark at 17-18psi. E85 would see you over 300 but you will need 20+psi.

Cams would make a huge difference

I personally wouldn't waste my money on aftermarket cams (they do sound nice tho). I have seen 180or200's car make 430 odd on E85 with stock cams so they cant be that bad a thing.

When you say Huge difference what do you actually mean????10kw?50kw?

they help make more power on less boost. So in a stock engine you can run 300 rwkw without having to push 20+ psi to get there. thats where cams come in handy! its a lot safer on the engine and you get some nice response gains to boot.

with my neo i gainedpower and response EVERYWHERE from fitting a set of drop in cams... and also runs less boost to make same power.

i dont know much first hand about rb cams but r33 rb25 just doesn't pull like a r34 rb25. 34 just has better power over the whole range.. personally i feel 33 cams are lacking. cams are cheapish and more power is always better. ohh and ebay has wicked prices. im soon to be cammed up with adj cam gears awaiting delivery! :(

they help make more power on less boost. So in a stock engine you can run 300 rwkw without having to push 20+ psi to get there. thats where cams come in handy! its a lot safer on the engine and you get some nice response gains to boot.

with my neo i gainedpower and response EVERYWHERE from fitting a set of drop in cams... and also runs less boost to make same power.

Have you got before and after graphs? From what i have read on this forum 10rwkw is about all you will gain from drop in cams (Mid range is improved also obviously).....If that is the case i think i will leave my stock cams in and save all the hassles.

the difference that you feel between a stock r33 and r34 has to do with the size difference in turbos rather then cams.

Plus the NEO has the Solid Cams already standard which are from all accounts a much better thing than the 25DET's

I'm constantly hearing how bigger cams give more power and better response...........def more power, but not so sure about the latter.

Unless your upgraded sticks have less duration than stock and subsequently a shorter overlap, your fatter cams will move the power curve higer in the rev range (which = less response)...........but why would anyone upgrade their cams with less duaration just to gain response, seems to defeat the whole purpose of the upgrade cause the stock items then would ultimately produce more power.

Years ago when i was playing around with N/A V8's that was the case with larger cams(average low down but alot better mid-top end grunt). Lets face it 2.5 litres and low down off boost grunt (under 3000rpm) is a moot point anyway.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...