Jump to content
SAU Community

Recommended Posts

Realistically, they can do whatever they like. It is your word against theirs.

To get behind that trim piece, you can simply undo the screws holding it in behind the ash tray and above the speedo. From memory the rest of it is clipped in. Be careful though, it is fairly easy to crack. You also unclip the gearboot and there are a couple of screws for it under there too. Logic will prevail with this one if you take your time..

Best bet is to feed it into the glove box, that was its reasonably out of the way and you can still get to it. Generally if they actually look in your glove box you are up the creek anyway, yet having it there will minimize the attention.

GL

i want to hide my boost controller?

how do i get into this compartment see below?

post-75167-1284382352_thumb.jpg

You do realize it wont be hidden now that you've told everyone where it is... ;)

May as well just hide it in your ashtray like normal people..

Are cops allowed to physically touch any parts of the car?

Ive heard they can even touch your bum :blink:

It all depends on how you drive and what you are doing............like me, many ppl have SAFC and boost controllers mounted on the dash/steering column/console and have no problems with it.

I've been pulled over and they have looked at the car while I've done a RBT and then let go with no problems. But then again I don't use the road as a burn out pad or a race track.

So wanting to hide it is sort of suspicious???

It all depends on how you drive and what you are doing............like me, many ppl have SAFC and boost controllers mounted on the dash/steering column/console and have no problems with it.

I've been pulled over and they have looked at the car while I've done a RBT and then let go with no problems. But then again I don't use the road as a burn out pad or a race track.

So wanting to hide it is sort of suspicious???

not sure where u come from , but being defected every time you move isn't very fun.

and when cops look for a boost controller they would usually look from the engine bay and look for vac lines running all over the place

people usually use coloured shiny vac lines they buy from autobarn etc so its easy to spot

use blank simple lines and try to make it look oem. but the vac lines always run to a solenoid of some sort, so thats the easiest way to find it with the controller hidden or not

It all depends on how you drive and what you are doing............like me, many ppl have SAFC and boost controllers mounted on the dash/steering column/console and have no problems with it.

I've been pulled over and they have looked at the car while I've done a RBT and then let go with no problems. But then again I don't use the road as a burn out pad or a race track.

So wanting to hide it is sort of suspicious???

i want to hide it inside the dash/steering wheel/console area, how do i "unclip" it to get in there?

In my R32 I cut the ass out of the ashtray and mounted it inside there, when you flip it open it looks very tidy. Hid the solenoid underneath my AFM so that you need to unbolt the entire POD assembly to be able to even see it, no cop is ever going to find it.

All the wires and vac hoses are cable tied underneath it as well.

Edited by Rolls

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • But seriously, can we ask for the results of the "tip a bottle of metho into a nearly empty tank" experiment?
    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
    • Thanks @Duncan Ride height is fine. I think it's almost stock tbh. Happy to share a pic. I don't actually have a regular mechanic as haven't lived in Sydney too long. Could you or anyone recommend any shops in Sydney?
×
×
  • Create New...