Jump to content
SAU Community

V35 Auto Transmission, How Good Is It?

drift garage
 Share

Recommended Posts

drift garage Contributor

drift garage

Posted
Posted

HI guys, im looking at buying a v35 and i just wanna know how good is the semi automatic function, i got a mate with a stagea that has the semi auto with the button shift on the steering wheel, but its pretty crap if you ask me, when you rev the car hard and try and shift, it takes forever to shift it just seems lazy, it will also not let you shift down if your revs are too high, which would ruin it a bit in my opinion. but thats the stagea, i want to know how the v35 is and please only comment if you own a v35, not pretend.

thanx guys

V35_Paul Veteran

V35_Paul

Posted
Posted
HI guys, im looking at buying a v35 and i just wanna know how good is the semi automatic function, i got a mate with a stagea that has the semi auto with the button shift on the steering wheel, but its pretty crap if you ask me, when you rev the car hard and try and shift, it takes forever to shift it just seems lazy, it will also not let you shift down if your revs are too high, which would ruin it a bit in my opinion. but thats the stagea, i want to know how the v35 is and please only comment if you own a v35, not pretend.

thanx guys

Only works well with a grounding kit. $80 - $150 about

iamhe77 Grand Master

iamhe77

Posted
Posted
HI guys, im looking at buying a v35 and i just wanna know how good is the semi automatic function, i got a mate with a stagea that has the semi auto with the button shift on the steering wheel, but its pretty crap if you ask me, when you rev the car hard and try and shift, it takes forever to shift it just seems lazy, it will also not let you shift down if your revs are too high, which would ruin it a bit in my opinion. but thats the stagea, i want to know how the v35 is and please only comment if you own a v35, not pretend.

thanx guys

Same transmission. Same delay.

As Paul said, a grounding kit makes a difference but only if it is connected to the trans dipstick bracket.

Also, shift kits are readily available and can be shifted interstate if that is what you want.

Have a look at Wholesale Automatic Transmissions here in Vic. If you send them your valve body, they will kit it and send it back to you for installation. They have told me that it has been used on a rock climber with 473kw without any kind of failure from the transmission... just remember to install a trans cooler as well!

drift garage Contributor

drift garage

Posted
  • Author
Posted
Same transmission. Same delay.

As Paul said, a grounding kit makes a difference but only if it is connected to the trans dipstick bracket.

Also, shift kits are readily available and can be shifted interstate if that is what you want.

Have a look at Wholesale Automatic Transmissions here in Vic. If you send them your valve body, they will kit it and send it back to you for installation. They have told me that it has been used on a rock climber with 473kw without any kind of failure from the transmission... just remember to install a trans cooler as well!

that sux, has any one here done the shift kit on a v35, i've heard about them but do they just reduce slippage? does it help at all with the delay?

scotty nm35 Grand Master

scotty nm35

Posted
Posted
that sux, has any one here done the shift kit on a v35, i've heard about them but do they just reduce slippage? does it help at all with the delay?

I think im the only one to build the re5 over here, Kewish automatics did mine. Its handling 300awkw at the moment but I had to ditch the torque converter lockup.

Shifts instantly now but the stock ecu still drops timing between changes which is a good thing at that power...

R6n350GT Experienced

R6n350GT

Posted
Posted
I think im the only one to build the re5 over here, Kewish automatics did mine. Its handling 300awkw at the moment but I had to ditch the torque converter lockup.

Shifts instantly now but the stock ecu still drops timing between changes which is a good thing at that power...

Just go manual ! If ur buying a V35 then why auto?

drift garage Contributor

drift garage

Posted
  • Author
Posted
Just go manual ! If ur buying a V35 then why auto?

i gotta share it with the wife, for when i take her commodore to tow the race car, and she doesn't drive manual, im trying to find a way around it so i can get the manual!! the only way i see it right now is to put a tow bar on the v35 and use that, that way i can get the manual, cause i don't need the wife's car to tow. but i gotta check the tow rating first before i go making plans.

R6n350GT Experienced

R6n350GT

Posted
Posted
i gotta share it with the wife, for when i take her commodore to tow the race car, and she doesn't drive manual, im trying to find a way around it so i can get the manual!! the only way i see it right now is to put a tow bar on the v35 and use that, that way i can get the manual, cause i don't need the wife's car to tow. but i gotta check the tow rating first before i go making plans.

Just buy her a bus pass when u take her car, problem solved.

VNS 24 Mentor

VNS 24

Posted
Posted

I don't drive manual so I don't know about them.

But I think auto is not that bad either, if not the worse. It goes smooth and can enjoy the car more when cruising around.

Also, if you feel like having abit of fun, all you have to do is step on the pedal. :P

will's35 Enthusiast

will's35

Posted
Posted

Great auto gear box I reckon, It is no Ferrari F1 or BMW SMG2, just put it in D and press the power to button and you will find it a great daily.

Not a good match on the track, but it is fine on winding roads or city streets.=D

peetii Contributor

peetii

Posted
Posted

I find the V35 autos are pretty smooth and responsive, more so in tiptronic mode.

Had an automatic Supra and compared to the V, its quite slow by way of when to downshift and overall responsiveness.

However the tiptronic sometimes won't shiftwhenever you want since the ECU probably protects the engine from over revving.

  • 1 year later...
ballsmyberries Newbie

ballsmyberries

Posted
Posted (edited)

just wondering about this V35 transmission and i got some question regarding to it, i'm currently considering to purchase a v35 "04" with A/T transmission with it, clocked over 140000 km, how reliable are these AT transmission?

Edited by ballsmyberries
Deep Dish V35 Experienced

Deep Dish V35

Posted
Posted (edited)

the weakest nut on any gearbox is the nut behind the steering wheel. the key is to treat it nice, service it regularly, and dont be a tool.

i personally find the auto shifts much better at 3/4 acceleration than when your foot is to the floor. the ecu tends to override manual mode when youre pushing it

and you only really hear about the CVT8 gearboxes being problematic

Edited by Deep Dish V35
projectx Collaborator

projectx

Posted
Posted

In "D" mode the V35 is the best auto gearbox ive come across. Really smooth and 99% of the time chooses the right gear with little delay. In my opinion its better then the 5 speed in the V36 (in auto mode). But in sport mode the V36 one is better.

Howaitonaito Mentor

Howaitonaito

Posted
Posted

The RE4/RE5 gearbox has been around for years (my mates 1988 nissan cefiro has a RE4 box similar to mine only with software change) and is a great box, yeah its not a VW DSG unit but do remember your not driving exactly a small car you are driving a big lazy sedan/coupe/wagon

iamhe77 Grand Master

iamhe77

Posted
Posted

the weakest nut on any gearbox is the nut behind the steering wheel. the key is to treat it nice, service it regularly, and dont be a tool.

i personally find the auto shifts much better at 3/4 acceleration than when your foot is to the floor. the ecu tends to override manual mode when youre pushing it

and you only really hear about the CVT8 gearboxes being problematic

The problematic part of the CVT is probably the nut behind the steering wheel as well.

sonicii Veteran

sonicii

Posted
Posted

The RE4/RE5 gearbox has been around for years (my mates 1988 nissan cefiro has a RE4 box similar to mine only with software change) and is a great box, yeah its not a VW DSG unit but do remember your not driving exactly a small car you are driving a big lazy sedan/coupe/wagon

RE4/RE5 doesn't really define the gearbox type, it really just states that it is an electronic controlled 4 or 5 speed auto box. there were many transmissions that started with RE4, some were good, some weren't, all having signifincant differences. eg. the RE4F02A has the valve body on the top and wasn't known for reliability. the RE4F04A has the valve body on the bottom and was much stronger. the RE4/5 in the V35 is quite different again.. considering it is a RE5R.. (RWD box).

That said, the unit fitted to the V35 seems to be quite good..

ballsmyberries Newbie

ballsmyberries

Posted
Posted (edited)

thanks and appreciated it alots for the information. how to ensure that the gearbox is in tip top condition when i go the the test drive? I've been driving a stick for all my life and I wish to replaced my wife's car with V35.

Edited by ballsmyberries

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • Kinkstaah
      My BMW E39 528i touring

      By Kinkstaah · Posted

      @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • GTSBoy
      My BMW E39 528i touring

      By GTSBoy · Posted

      These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • PranK
      My BMW E39 528i touring

      By PranK · Posted

      The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
    • soviet_merlin
      My BMW E39 528i touring

      By soviet_merlin · Posted

      It's amazing how well the works on the leather seats. Looks mint. Looking forward to see how you go with the wheels. They do suit the car! Gutter rash is easy to fix, but I'm curious about getting the colour done.
×
×
  • Create New...