Jump to content
SAU Community

96 Series Ii 33 Gtst Shuddering And Screetching

hks33
 Share

Recommended Posts

hks33 Experienced

hks33

Posted
Posted

hey sau,

love this site and appreciate everyones help alot, i recently have got my brake pads machined and replaced but for some reason when i apply sufficient force to the brakes i can hear like a screeching similair to the sound of worn pads... its only coming from the front discs im fairly sure they arent worn allready and not sure what it could be since i have recently changed all four

regards chris

i forgot to mention the car shudders and shakes when slowing down and force is put on the brake

DVS JEZ Grand Master

DVS JEZ

Posted
Posted

the discs are warped or the discs mounting surface has rust on it causing it to not seat perfectly flat

, did you get a mechanic to replace the pads and machine the discs?

take it back and ask them to check it for u. they shouldnt charge you anything if they were done recently.

other than that if they were not bedded in correctly they might be glazed and warped from any hard braking you have done.

hks33 Experienced

hks33

Posted
  • Author
Posted

hopefully there not warped there not rusty either because had all 4 replaced and machined recently its just the noise the front two or front one which is a problem

Dobz Experienced

Dobz

Posted
Posted

If they were working ok ei. not shuddering or screeching before then they started it would be due to improper wear in of the pads. If you don't wear the pads in properly they glaze as DVS32R said. Glazing makes them squeel, then over heats your rotors causing them to warp and gives you shudder.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...