Sick R33

[rodcar]

Hi all i have an r33 GTST and it won't runs rough and stalls any ideas

thanks

[jarrod83]

hard to guess with very little info.. air leaks are pretty common tho.. and can cause it to run rough and stall

Jarrod

[Mandingo]

More info needed buddy.

Does it stall as soon as you apply accellerator when standing still? does it run any good sometimes? think of all symptoms it is showing.

Edited September 21, 2010 by Mandingo

[defari]

lol i read it as "my car wont run rough and stall"

too many possibilities like everyone has said..

[rodcar]

starts ok run ok under when hard on the gas runs bad when driving it at a normal speed and stalls at idel

[joeyjoejoejuniorshabadoo]

with a description like that i cant beleive this got to 5ive posts without being solved!

[rodcar]

with a description like that i cant beleive this got to 5ive posts without being solved!

i'm sorry i am not as switched on as you when it comes to cars why don't you ask about it instead of being a smartarse

[joeyjoejoejuniorshabadoo]

so the problem is at idle it stalls and when cruising it's rough

but under load it runs fine...

1stly do you have an atmo BOV?

[defari]

lol as much as he's having a go at you, its actually quite hard to work out what your saying..

im assuming it runs ok / starts ok but when you get on the gas it misfires/splutters/stalls.. am i right?

[rodcar]

standard BOV yes and it ok under load but will not idle had the motor replaced about two weeks ago could it be a vacume problem

[Ryan180]

standard BOV yes and it ok under load but will not idle had the motor replaced about two weeks ago could it be a vacume problem

Try raising the idle and setting the TPS

[Rolls]

standard BOV yes and it ok under load but will not idle had the motor replaced about two weeks ago could it be a vacume problem

Take it to the people who you paid to replace it and tell them the job isn't satisfactory.

It could be a vacuum leak, have you checked everywhere for loose hoses and clamps? Old fouled plugs? Checked the ECU for error codes?

[tomtom92]

check all your intercooler piping in case there is a leak

[ARTZ]

Great...Now, me and the mad scientist got to rip apart the block... and replace the piston rings you fried.

[PM-R33]

Poor guy. This thread had no chance.