Jump to content
SAU Community

Recommended Posts

**NOTE THIS IS FOR AN AFTERNOON SESSION**

Hey guys and gals,

We have booked another Driver Training day on the skidpan at the RAC Facility in Kewdale!!

Please make sure you read and understand all requirements before signing up to this event. Getting there on the day and saying you didn't realize the impairments and are not prepared (not having a helmet etc) will result in you being excluded and no refund will be given. So make sure you know what you need to have!!

The training is held in a controlled environment on a skidpan with an instructor. We have paid for two instructors so everyone gets more time training (otherwise a lot of time is lost while the instructor changes cars). I am unsure who the instructors will be at the moment, however i have done several of these days and recommend any of their instructors.

You will do a variety of motorkhana style challenges, which aim to teach things like handling of your vehicle, braking, driver seating position and several other techniques.

HELMETS ARE REQUIRED - RAC no longer have any so you must supply your own helmet.

When - Sunday October 31st (Afternoon)

Time - 12.15pm SHARP - 4.20pm. Driver briefing is at 12.30 so BE ON TIME!! (Missing Briefing means NO track time)

Cost - $75 for SAUWA Members. $85 for non SAUWA Members (If spaces available)

Where - RAC Driver Training Facility. Grogan Road Perth International Airport

Please note this is primarily member's only event. Places will go to members first and if there are any left, non-members can attend at full charge ($85)

There are only 16 spots available so please PM me if you wish to participate and I will send you my bank account details - as you will need to pay within 7 days to confirm your spot. (First in first served basis sorry). I will not be chasing people up for payments. If you have not paid within 7 days, your spot will be cancelled with out notice and given to someone else. When you send me your PM to confirm your spot, please give me your full name, contact phone number and what model car you will be driving (preferably colour and model) so a running list can be prepared for the day and it will also make it easier for us to work out the order on the day.

Your name will NOT be added to the attendees list unless you PM me, this means I won't be taking names down from people just posting their interest in this thread.

Driver/Vehicle requirements:

Current and Valid Drivers License

Long Sleeve top, long pants required

Helmet

Fully enclosed foot wear

Car to be registered with no safety defects

Seat belts both left and right hand side front

All loose items removed from inside the vehicle

Road legal tyres (no slicks)

If you have any questions, please feel free to contact me via PM.

Cheers

Paul

SAUWA Account Details

Daniel W Brady

BSB: 016359

Account# 571542655

Description: RAC OCT " SAU Username"

1. Unscarred711

2. Neuroglider - Paid

3. ossie 21 -PAID

4. 3BEPKA -PAID

5. Jazz

6. -JY-

7. mosoto -paid

8. MLCrisis - paid

9. MLCrisis (Joesph) - paid

10. MLCrisis (Eamonn) - paid

11. SoFreshSoClean - paid

12. porter180 - Paid

13. skyliner85 -PAID

14.

15. Davyboy -PAID

16. Gdekwant - PAID

Reserves

ichizora

GreyWolf

Link to comment
https://www.sau.com.au/forums/topic/337792-sauwa-driver-training/
Share on other sites

  • Replies 107
  • Created
  • Last Reply

Top Posters In This Topic

Say my car is still registered, but I've put a different motor in it and haven't got it engineered or through the pits. Does that count as a safety defect?

Nah, aslong as the engine isn't going to fall out of the car it will be fine >_< Aslong as it's safe to drive on the road, then they won't have any issues with it.

Nah, aslong as the engine isn't going to fall out of the car it will be fine >_< Aslong as it's safe to drive on the road, then they won't have any issues with it.

ahah YES! First test run in 2 weeks, if all goes well and there's spots left I'm so in :D:bunny:

This is hardly filling up quickly :(

My spot can be taken by someone else if they want it when this goes public, not 100% sure my car will be fixed by the end of the month as I've got my work hack to get over the pits first. Powercruise claimed a victim with my head gasket :rofl:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...