Jump to content
SAU Community

Recommended Posts

I'm chasing some internal drive wheel nuts that will fit Volk GT-c wheels.

My searches on the interwebs and ebay are not proving to be very fruitful.

I even stopped into bob jane this afternoon - They had them but were just the plain old silver/chrome, non lightweight and wanted $75 for 20.

I thought for that price I might be able to get something nicer anodized ones or something.

Anyone know where i can pick these up?

BTW... I'm not really interested in paying $280 odd dollars for genuine rays or anything.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/337906-internal-drive-wheel-nuts/
Share on other sites

Just be cautious of them.

If you over tighten them you will strip the nut. They area soft alloy.

Also if you take your wheels off regularly re think buying these.

As the alloy is soft and everytime you tighten them up your stretching the thread in the nut.

( I used to work for a wheel and tyre store. Have seen what happens to these nuts on a regular basis.)

Just be cautious of them.

If you over tighten them you will strip the nut. They area soft alloy.

Also if you take your wheels off regularly re think buying these.

As the alloy is soft and everytime you tighten them up your stretching the thread in the nut.

( I used to work for a wheel and tyre store. Have seen what happens to these nuts on a regular basis.)

^^^ Good advice.

Torque wrench is a good tool to have.

soft metal FTL. I wouldn't want to get a nut crossthreaded or stripped. they are holding your wheels on, you know :banana:

i bought supercheap locknuts and the material is so soft that I almost rounded the tool the first time I used it. very poor quality it doesn't engage far and the metal is soft. i always cringed when i used them after that. got proper ones now.

i reckon one bash with a chisel/hammer and they would have split in two.

if you over tighten I would be more worried about actually just splitting the whole nut, been there done that... then you need to drill out the stud to get it off...

Ive had no troubles at all since I got a decent torque wrench to use on them...

I'm chasing some internal drive wheel nuts that will fit Volk GT-c wheels.

My searches on the interwebs and ebay are not proving to be very fruitful.

I even stopped into bob jane this afternoon - They had them but were just the plain old silver/chrome, non lightweight and wanted $75 for 20.

I thought for that price I might be able to get something nicer anodized ones or something.

Anyone know where i can pick these up?

BTW... I'm not really interested in paying $280 odd dollars for genuine rays or anything.

Cheers

I got these kind of wheel nuts too. I was looking for lock nuts and a key. At first I asked Wheel Revolution they said $120, so then I tried On The Run Motorsports in Vic. I ordered the set from them and got it for $80.

I suggest trying On The Run Motorsports, it may take a while 1 month or 2.

FYI you can also use a regular 17mm nut or most generic lock nuts on these types of wheels.

You will need to use a single hex deep socket to use that type of nut, such would also be available in an alloy nut.

Also, dont forget alloy nuts have a limited life span.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...