Jump to content
SAU Community

Carbon Fibre S2 Front Foglight/indicator Surrounds Group Buy!


Recommended Posts

Hi Guys,

I just wanted to thank everyone for the patience and understanding in this group buy.

I am very proud to say THEY HAVE ARRIVED!! I am busy packing these up for you all I will have them in the post tomorrow with delivery before the weekend.

You will receive an email with your tracking details tomorrow.

Thank you again to all of you.

Cheers,

Shane

PSI Parts

  • Like 1

Ok, I have been to the post office and they were all sent Express Post so expect them tomorrow guys.

You all should have received an email with your tracking details also.

Shane

managed to snap off one of the screw points while fitting.. im raging so hard right now lol

hopefully an adhesive helps..

Oh man that sucks. I was so paranoid about doing the same thing. Try some hardcore superglue or just don't worry about the one.

My stock ones had two snapped off from a minor prang with a roo years ago and I didn't even know about it.

wow Phil i cant believe how dissapointed i am right now with the fitment of these, i go to put the right hand side 1 on first and 3 out of the 6 tabs are about 5mm out of where there supposed to be and are no where near fitable, all the tabs on the right surround are overly to fat compared to the left side surround where the tabs all look beatiful and alot neater. i know with being aftermarket and carbon there not going to be 100% but to completely not line up is not cool.

Been waiting so long for these and for them to not fit is so dissapointing, i dont want a refund would just like a set that fits!

  • Like 1

If you have a drama send us an email with a pic and an explanation with what the drama is and we can sort it out.

Hmmm that's strange man. Mine were nearly all spot on. A couple needed a slight "push" with the screwdriver to move them a millimetre or so, but nothing that would make it not fit :(

i glued the mount back on but ended up just ignoring it since it didnt really influence the fitment

regarding fit, i found it was out a bit too. 2 points on each cover require the mounting point to slot inside, and the points on this cover are just too fat to fit inside the little circle on the foglight assemply

i ended up just trimming about 5mm off the 2 points on each cover. just used a hacksaw blade took about 10mins

agUul.jpg

MW8Hy.jpg

  • Like 1

I wonder why mine didn't have any problems? Like I said, a couple of the screw holes were slightly aligned wrong but only by maybe a mm. And some of the holes were drilled slightly to big so I just needed slightly thicker screws but that was it.

Delljit, looks good man. You happy with it?

well i had to use wider screws, and the 2 mounting points that are closest to the centre of the car were too long to fit into the assembly's standard points so i had to hack saw a few mm off to compensate

it looks good but was a bit more screwing around than i initially anticipated

happy with the end product in terms of appearance, not as happy in terms of needing adjustments

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah that is not actually a lot. Just painting my GTR frontend and the little bits to make sideskirts/nismo flare pieces work correctly/fit on the sedan/mount up correctly came to about $7000. Is it a lot? Sure. None of this is economical. Economy would be shelling the car and buying a 2010 Corolla to commute in. The perspective of all of this is different.
    • I have the 2025 build re003s’ on my 06 XT Forester Turbo and I quite rate them for street wet and dry
    • I don't see any issues here. I've been saying all along this is a big job, the price reflects that.  When the car comes back perfect I'm sure it will feel like money well spent. 
    • Remember, take original quote. Double it. Then add a bit more. It's how any project goes.
    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
×
×
  • Create New...