Jump to content
SAU Community

Recommended Posts

Hey recently put some coilovers in my car they are not new units and didn't pay a lot of money for them so wasn't expecting them to be perfect.

The fronts especially the passenger side seems to make a knocking sound when hitting bumps. Have looked at everything and made sure everything is tight really doing my head what could be making the noise. The car is booked in at a suspension joint for a wheel alignment and to get it checked out just wondering what peoples thoughts might be.

Link to comment
https://www.sau.com.au/forums/topic/338575-coilover-knocking/
Share on other sites

my greddys have the same problem (rear passenger)

its a very loud clunk (knocking) sound when going over certain bumps.

would also like to know if i can check anything else. fulcrum said its definatly the shock but at $264 a side to get them rebuilt I wanna make sure

Do you know the condition of them before purchase? IE. had the previous owner had troubles? What brand?

Could be something as simple as the upper mount bushes being worn/incorrectly installed.

The previous owner bought em for a r33 GTR a fair while back but never installed them so was unsure on the condition. They are ARC coilovers (so hard to find any info on em) but look to be in good nick i have pulled the coilover apart and test the shock and that all seems fine tightened up everything i thought might be lose and it still does it. If the suspension place can't work it out i'll pull them out again and see if i can get to the upper bushes.

my greddys have the same problem (rear passenger)

its a very loud clunk (knocking) sound when going over certain bumps.

would also like to know if i can check anything else. fulcrum said its definatly the shock but at $264 a side to get them rebuilt I wanna make sure

I'll see what TSR says about mine i was also gonna go to fulcrum but got recommended TSR by a good mate. Hopefully it's something that doesn't require it being rebuilt.

knocking means theyre tired, rebuild time, or buy new ones.

tiens love to do it, ive had 2 sets that knock in 2 different cars, the harder the ride, the faster they start knocking.

passenger side tends to go first because theres more bumps on the side of the road as apposed to the center.

I'll see what TSR says about mine i was also gonna go to fulcrum but got recommended TSR by a good mate. Hopefully it's something that doesn't require it being rebuilt.

That $264ea was an email quote from TSR. I'll probably take mine out of the car and go see them sometime next week. Fulcrum wont rebuild anything that isnt tein.

Never ever again will I buy 2nd hand coilovers :down:

my Koni coilovers where knocking, i tightened everything with no luck in fixing the knock, mine was drivers rear,

just put in some new HSD HR coilovers this week, noise is gone, like driving a new car again, paid 1300ish

my Koni coilovers where knocking, i tightened everything with no luck in fixing the knock, mine was drivers rear,

just put in some new HSD HR coilovers this week, noise is gone, like driving a new car again, paid 1300ish

Hmm I'll probably just live with it and swap the stock suspension back in when i sell the car if it comes down to something like that. It's annoying and sounds nasty but I am going over seas mid next year and don't have that much money to spend on the car before i go overseas and sell it and the car rides very nicely apart form the sound

before you just go throwing more money at your car, try this;

Jack the car up on that corner so the wheel is off the ground in full droop. Grap the spring and give it a little shake. If the spring is become unseated due to sagging over time, this is where your knocking is coming from.

Also, do the opposite, (you will need 2 jacks for this). Jack the car up, and jack the suspension arms up untill the car lifts up off the first jack (taking the weight of the car) so the car is in full bump. Look to see if the coils are comming in contact with one another.

2 simple ways to ensure your not throwing money away.

before you just go throwing more money at your car, try this;

Jack the car up on that corner so the wheel is off the ground in full droop. Grap the spring and give it a little shake. If the spring is become unseated due to sagging over time, this is where your knocking is coming from.

Also, do the opposite, (you will need 2 jacks for this). Jack the car up, and jack the suspension arms up untill the car lifts up off the first jack (taking the weight of the car) so the car is in full bump. Look to see if the coils are comming in contact with one another.

2 simple ways to ensure your not throwing money away.

and what if the spring has become unseated or the coils are hitting?

i got hektik knock in mine after i hit a gutter on the rear, very very loud, especially when u have no interior at all haha.

went for a very spirited mountain run on the weekend and now the front passenger is doing it also.

ill be buying new ones soon,

coilovers ive heard only should last 20,000kms and ive got 45,000 kms so im happy with that lol

i got hektik knock in mine after i hit a gutter on the rear, very very loud, especially when u have no interior at all haha.

went for a very spirited mountain run on the weekend and now the front passenger is doing it also.

ill be buying new ones soon,

coilovers ive heard only should last 20,000kms and ive got 45,000 kms so im happy with that lol

Dont no who told you that colovers only last that long we fit coilovers every day and they last for years. If they only last 20,000kms then they must be shit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Man, different parts but the same numbers is terrible @dbm7! And it doesn't help that most online shops don't list the part numbers at all. They just give a list of compatible models...
    • Slow when hot could also be because its getting more dynamic compression, OR things are getting a bit tighter once it is all expanded. If it were an earthing issue, typically I'd expect you to have it have issues all the time. Unless it's really a combination of both things. Where the higher compression, and things being a bit tighter, is giving that bit of extra load and you do need a slight clean up on the cables/connections.
    • Yeah, this is one of the most annoying things about nissan part numbers... I've got an unrelated example... Image is of the AT output shaft ~ they have the same part#, but clearly the shaft on the left is beefier design to that on the right ...the difference (essentially) is the 'lighter' shaft on the right, is for engines up to RB25DE (this includes RB20 variants) : the shaft on the left is for RB25/26DET(T)....are they interchangeable? Yes...but obviously one shaft is going to be stronger than the other...and, the lighter shaft is around USD115, but the heavier shaft closer to USD150...same part#... ...epc-data usually tells a tale ~ the amayama listing for 39100-23U60 has a note "Longest side is between 60 and 105 cm" ; no such info is there for 39100-23U70 ...and given the great disparity in price between the 2 parts, it makes me at least curious (to the point of caution) where the 'extra money' went? ...ie; these 2 parts have a cost difference that (to myself at least) isn't explained by 'plastic boot'...ie; with amayama there's AUD700 price difference ...plastic versus rubber?...I'm not seeing it like that...and 60cm ~ 105cm...??...that's a huge disparity....something hinky going on here... I'd try searching by VIN, not model... /2cents
    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
×
×
  • Create New...