Jump to content
SAU Community

Recommended Posts

Hey recently put some coilovers in my car they are not new units and didn't pay a lot of money for them so wasn't expecting them to be perfect.

The fronts especially the passenger side seems to make a knocking sound when hitting bumps. Have looked at everything and made sure everything is tight really doing my head what could be making the noise. The car is booked in at a suspension joint for a wheel alignment and to get it checked out just wondering what peoples thoughts might be.

Link to comment
https://www.sau.com.au/forums/topic/338575-coilover-knocking/
Share on other sites

my greddys have the same problem (rear passenger)

its a very loud clunk (knocking) sound when going over certain bumps.

would also like to know if i can check anything else. fulcrum said its definatly the shock but at $264 a side to get them rebuilt I wanna make sure

Do you know the condition of them before purchase? IE. had the previous owner had troubles? What brand?

Could be something as simple as the upper mount bushes being worn/incorrectly installed.

The previous owner bought em for a r33 GTR a fair while back but never installed them so was unsure on the condition. They are ARC coilovers (so hard to find any info on em) but look to be in good nick i have pulled the coilover apart and test the shock and that all seems fine tightened up everything i thought might be lose and it still does it. If the suspension place can't work it out i'll pull them out again and see if i can get to the upper bushes.

my greddys have the same problem (rear passenger)

its a very loud clunk (knocking) sound when going over certain bumps.

would also like to know if i can check anything else. fulcrum said its definatly the shock but at $264 a side to get them rebuilt I wanna make sure

I'll see what TSR says about mine i was also gonna go to fulcrum but got recommended TSR by a good mate. Hopefully it's something that doesn't require it being rebuilt.

knocking means theyre tired, rebuild time, or buy new ones.

tiens love to do it, ive had 2 sets that knock in 2 different cars, the harder the ride, the faster they start knocking.

passenger side tends to go first because theres more bumps on the side of the road as apposed to the center.

I'll see what TSR says about mine i was also gonna go to fulcrum but got recommended TSR by a good mate. Hopefully it's something that doesn't require it being rebuilt.

That $264ea was an email quote from TSR. I'll probably take mine out of the car and go see them sometime next week. Fulcrum wont rebuild anything that isnt tein.

Never ever again will I buy 2nd hand coilovers :down:

my Koni coilovers where knocking, i tightened everything with no luck in fixing the knock, mine was drivers rear,

just put in some new HSD HR coilovers this week, noise is gone, like driving a new car again, paid 1300ish

my Koni coilovers where knocking, i tightened everything with no luck in fixing the knock, mine was drivers rear,

just put in some new HSD HR coilovers this week, noise is gone, like driving a new car again, paid 1300ish

Hmm I'll probably just live with it and swap the stock suspension back in when i sell the car if it comes down to something like that. It's annoying and sounds nasty but I am going over seas mid next year and don't have that much money to spend on the car before i go overseas and sell it and the car rides very nicely apart form the sound

before you just go throwing more money at your car, try this;

Jack the car up on that corner so the wheel is off the ground in full droop. Grap the spring and give it a little shake. If the spring is become unseated due to sagging over time, this is where your knocking is coming from.

Also, do the opposite, (you will need 2 jacks for this). Jack the car up, and jack the suspension arms up untill the car lifts up off the first jack (taking the weight of the car) so the car is in full bump. Look to see if the coils are comming in contact with one another.

2 simple ways to ensure your not throwing money away.

before you just go throwing more money at your car, try this;

Jack the car up on that corner so the wheel is off the ground in full droop. Grap the spring and give it a little shake. If the spring is become unseated due to sagging over time, this is where your knocking is coming from.

Also, do the opposite, (you will need 2 jacks for this). Jack the car up, and jack the suspension arms up untill the car lifts up off the first jack (taking the weight of the car) so the car is in full bump. Look to see if the coils are comming in contact with one another.

2 simple ways to ensure your not throwing money away.

and what if the spring has become unseated or the coils are hitting?

i got hektik knock in mine after i hit a gutter on the rear, very very loud, especially when u have no interior at all haha.

went for a very spirited mountain run on the weekend and now the front passenger is doing it also.

ill be buying new ones soon,

coilovers ive heard only should last 20,000kms and ive got 45,000 kms so im happy with that lol

i got hektik knock in mine after i hit a gutter on the rear, very very loud, especially when u have no interior at all haha.

went for a very spirited mountain run on the weekend and now the front passenger is doing it also.

ill be buying new ones soon,

coilovers ive heard only should last 20,000kms and ive got 45,000 kms so im happy with that lol

Dont no who told you that colovers only last that long we fit coilovers every day and they last for years. If they only last 20,000kms then they must be shit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
×
×
  • Create New...