Jump to content
SAU Community

Recommended Posts

Best Sound?

got a hks hi power on my series 2 r33 i reckon that would sound amazing on a 34 but pretty pricy and highly illegal db wise it stated in the manual (for use in japan only no other country) im assuming its because its the same exhaust they used on most the fast and the furious cars they are designed to spit flames that and the decibels pumped out

Inner Silencer with HKS? Or would it change the note alot?

it would change the note substantially i wouldnt bother with a inner silencer just get a peice of sheet metal the the shape of the exhaust flange if your worries about cops and drill 4-5 holes about 1-2 mm big in it so then if you get hastled in goes the restrictor :down:

I've got the Trust power extreme II on mine as well and it sounds nice, pretty quiet and sounds good when you give it a squirt, it'll get louder when I change the cat and front/dump pipe.

One of the best sounding ones I've heard are the HKS Silent Hi-Power tho.

I have a front pipe, straight pipe with an Apexi N1 exhaust. Sounds ok but just a bit louder than OEM IMO. N1's sounds alot better on SR's, Ill give another report once I change my turbine outlet.

I don't think there is a "best".

haha ok, I heard a GTT passing me while I was sitting in my car and as it passed you could hear the spooling of the turbo through the exhaust, sounded pretty good not sure what exhaust though

i would say you would have heard the turbo through a pod filter.. not the exhaust..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I hope it's actually possible. This is a write off in insurance world.
    • Yup. 2-way with shallow ramp angles. Still works.
    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
×
×
  • Create New...