Jump to content
SAU Community

Recommended Posts

thanks heaps :down:

i was actually looking at the first one, my search didnt include the second link since i put the price limit to 1000, but it does look like its in pretty good condition thanks :)

nah not just on corollas, they do seem to be good for reliability etc though, but ill have a look at the pulsar thanks

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

the pulsars of that era are pretty prone to rust, so if you do look at any, just make sure that the body doesnt have more bog and newspaper than metal. The engines are pretty good though.

Personally I would go for a corolla, or if you can find one, an early rwd corona. Those things are damn near indestructable, and if you find a jap built one with the old 18R engine in it, then it will run forever. (they also built them here with the "starfire" engine from the 4cyl commodores...*shudders* )

Also, if you can handle the shame, a datto 120Y or any of the late datsuns/early nissans with the A series engines in them are pretty reliable and stupidly cheap to fix if they do break.

My first car was a 1993 Toyota Paseo - a/c, power steer, elec windows, all the fruit....1.5L 4cyl, i took it just over 200,000kms.

I thrashed the absolute ring off that car day in/day out, burnouts, went through 2 clutches, some tyres, yet nothing ever went wrong mechanically (other than the clutches). I still see the car every wednesday night at indoor soccer, done 260,000km now and still exactly the same when i sold it 3 years ago!!!

OP, I just bought a 1999 hyundai sonata with 257kms for $1050, rego till march. Only thing I can find wrong with it: drivers elec window gets jammed halfway. Ice cold a/c, p/s works, other windows work. V6 2.5L and it just came from Geraldton :(

Edited by Ten Four

safest bet is a corolla snap up anything with decent k's my first old 86 corolla raked up 400,000ks n sold her off for $900! haha

or a gemini, VS commodore, VL, R31, its all good. -tho a coppa mate said they always pull over old commodore's as they tend to me driven by ppl without a licence..

rooster the datsuns wouldnt be a problem, I actually quite like the look of the Pre 1983 120y's and I dont really care what people think i just need it to be reliable and cheap :P

I'll have a look at them and I'll try to find a non rusty pulsar too

thanks again everyone :rant: and congrats on the sonata ten four

Try these guys man: http://aberdeenautoauctions.com.au/

Lots of cheap stuff. I went down to bid on a 1994 rolla seca actually and or a holden nova hatch. But opened bonnet of both and saw lots of oil down the bottom (phone has a bright as LED light) - didn't bother bidding.

th_DSC00305.jpg

Saw that, opened bonnet, no oil and underneath, idled quiet as and was all red sand underneath from being in the country.

Oh yeah, somehow I ended up bidding on a 180sx with a ca18det manual... was mint too. That went for $4500 (I stopped bidding at $4400)

(Looks like they just changed their website like this arvo lol - bear with it..)

Edited by Ten Four

GET AN R31!

you should be able to pick up a series 3 executive in good condition for less than a $1000,

my first r31 was $600 and even the air-con worked awesomely.

and parts are easy and cheap to get

Erik I'm a bit worried about the fuel consumption on an R31, part of the reason why I'm looking for something like a corolla is to have a car which is a bit cheaper to run as i do need to drive quite long distances, My R34 that i get to drive sometimes now drains fuel like mad ;)

Erik I'm a bit worried about the fuel consumption on an R31, part of the reason why I'm looking for something like a corolla is to have a car which is a bit cheaper to run as i do need to drive quite long distances, My R34 that i get to drive sometimes now drains fuel like mad ;)

i don't think my 31 is that bad, its better than the camry i'm driving atm anyway.

i have noticed that the fuel economy was better once i put a new exhaust on it though and my injectors cleaned.

and i drive like a dick most of the time too.

I reckon they are great first cars. I bought a 1986 4age ae82 corolla with 287,000 on the clock for my first car, cost me $900. I did 20-30,000kms of typical p plater driving, redlining, offroading including doing a couple of jumps in it and nearly everyone one of my friends did a burnout in it atleast once. I changed the oil occasionally and not one thing ever broke on it. I ended up selling it for only $100 less than I bought it and I coulda got more for it if I tried I reckon, sold within 12 hours of putting it up for sale

hit up the car forums, someone will be selling one for under $1k...maybe think about other small cars like excels...you could get a newer one than the corolla and they are 'fairly' reliable and easy to source parts.

quokka would have lots of cars available, otherwise auctions are where you pick up the bargains on the weekdays...or even the cars that police put up for auction from hoons that don't pick the car up. You KNOW those cars have to be worth $1k or so because it costs almost $1k to pay the impound fee to get them out so cheapskates just leave it to be sold off.

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I see you've never had to push start your own car... You could save some weight right now...
    • Sounds good.  I don't 100% understand what your getting at here. When you say, "I keep seeing YouTube videos where people have new paint and primer land on the old clearcoat that isn't even dulled down" do you mean this - there is a panel with factory paint, without any prep work, they paint the entire panel with primer, then colour then clear?  If that's what you mean, sure it will "stick" for a year, 2 years, maybe 3 years? Who knows. But at some stage it will flake off and when it does it's going to come off in huge chunks and look horrific.  Of course read your technical data sheet for your paint, but generally speaking, you can apply primer to a scuffed/prepped clear coat. Generally speaking, I wouldn't do this. I would scuff/prep the clear and then lay colour then clear. Adding the primer to these steps just adds cost and time. It will stick to the clear coat provided it has been appropriately scuffed/prepped first.  When you say, "but the new paint is landing on the old clearcoat" I am imagining someone not masking up the car and just letting overspray go wherever it wants. Surely this isn't what you mean?  So I'll assume the following scenario - there is a small scratch. The person manages to somehow fill the scratch and now has a perfectly flat surface. They then spray colour and clear over this small masked off section of the car. Is this what you mean? If this is the case, yes the new paint will eventually flake off in X number of years time.  The easy solution is to scuff/prep all of the paint that hasn't been masked off in the repair area then lay the paint.  So you want to prep the surface, lay primer, then lay filler, then lay primer, then colour, then clear?  Life seems so much simpler if you prep, fill, primer, colour then clear.  There are very few reasons to go to bare metal. Chasing rust is a good example of why you'd go to bare metal.  A simple dent, there is no way in hell I'm going to bare metal for that repair. I've got enough on my plate without creating extra work for myself lol. 
    • Hi, Got the membership renewal email but haven't acted yet.  I need to change my address first. So if somebody can email me so I can change it that would be good.    
    • Bit of a similar question, apprently with epoxy primer you can just sand the panel to 240 grit then apply it and put body filler on top. So does that basically mean you almost never have to go to bare metal for simple dents?
×
×
  • Create New...