Jump to content
SAU Community

Recommended Posts

Hi guys this is my 1st post on this part of the site

I Have a V35 skyline which is balicaly stock apart from a nismo catback, DBA 4000 slotted front discs with Ferodo DS2500 pads and whiteline swaybars front and rear

The current wheels/tyres I have been using are KU19 245 40 R19 on the font and Federal 595 RPM 285 35 R19 on the back

Now the 1st time I went to the track I without the swaybars my biggest problem was inside wheel would light up when going around a corner "open diff + worn KU19s 275" anyhow the Federal 595 RPMs have fixed this problem to a degree

The problem I have now is that even though I have it set to the softest setting the whiteline swaybar on the front seems to be making the car understeer more which was sending my VDC into overdrive causing it to constantly grab the front left brake. Now the front tyres arent that far off the ware markers which was also something that would have contributed

I am happy with the way the rear or the car is behaving, yes I can still get it to step out if I want to but it seems to grip enough to keep me happy + I have a proper quaife LSD on the way

However I was thinking about buying a pair of 17 or 18" rims and throwing some R compound tyres on them and running them up front to try to reduce the understeer

The stock rubber/wheels for the front of the V35 is the same as the 350z

however I have 2 wheel/tyre stickers on the inside of my door one from japan and one which looks like a compliance sticker which have the same specs for the 17" rims but slightly different for the 18

iv attached pics of the stickers

if anyone could give me advice on what size tyre/rim to run on the front it would be great

I dont want to go less than the 245 im running now but I guess a slightly smaller size with a R compound would still be heaps gripper

post-9102-1286417562_thumb.jpg

post-9102-1286417569_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/339531-need-advise-on-r-compound-tyres/
Share on other sites

Yes Iv turned vdc off and the car was 2seconds quicker however the lack of front end grip was a pain in the ass and contributed to me coming off the track a couple of times. Not sure how u mean running r compound on the front is such a bad idea. The federal 595 Rpm are pretty dam sticky for a raod tyre treadware is 160 and I didn't have any Issues with the back kicking out unless I wanted it to which only happend on the hairpin

Have you had a decent wheel alignment done? Perhaps have a chat to the aligner and tell them the issues you are having. Poor turn in, poor mid corner grip, feathering and bluing of outer edge, inner edges overheating, etc

Yes Iv turned vdc off and the car was 2seconds quicker however the lack of front end grip was a pain in the ass and contributed to me coming off the track a couple of times. Not sure how u mean running r compound on the front is such a bad idea. The federal 595 Rpm are pretty dam sticky for a raod tyre treadware is 160 and I didn't have any Issues with the back kicking out unless I wanted it to which only happend on the hairpin

i would say running r's / non-r's around the car to correct a handling fault is a band-aid solution. might be a bad idea; like running cross plys and radials at the drag strip (ie. it's a big no no and disallowed). might work though, goodluck with it.

Edited by LSX-438

At the same time though its not like the cars understeering when im driving it around town or anything, its only when im pushing it to the limit that im having issues. To give you an idea of how hard im pushing it im lapping 2 seconds slower than a 350z thats supercharged 220rwkw~ + r compound all round + brembos

if you read my 1st post ull see that my cars stock apart from DS2500 pads on the front a catback and the swaybars I dont even have a LSD yet LOL

seems like you have already made up your mind then, but the fact the car is faster with the standard sway bar on tells me that your aftermarket one is not matched to the rest of your set-up.

At the same time though its not like the cars understeering when im driving it around town or anything, its only when im pushing it to the limit that im having issues. To give you an idea of how hard im pushing it im lapping 2 seconds slower than a 350z thats supercharged 220rwkw~ + r compound all round + brembos

if you read my 1st post ull see that my cars stock apart from DS2500 pads on the front a catback and the swaybars I dont even have a LSD yet LOL

At the same time though its not like the cars understeering when im driving it around town or anything, its only when im pushing it to the limit that im having issues.

This is how it works - you only notice which end has less grip when you push it to the limit.

+1 for stock front sway bar. Or if the rear is adjustable as well, make it stiffer. The outer holes are soft, inner holes are hard.

Unfortunatly I ditched the stock swaybars so im stuck with the whiteline ones, im kicking myself for this now. The reason I did this was because I kept my swaybars for my old 180sx and ended up throwing them in the bin after I sold the car as the whiteline ones were way better. Unfortunatly this dosent seem to be the case on the V35 or more so the VDC system is based around the stock swaybar and goes into overdrive with the stiffer swaybar. VDC is good because it keeps the car on the black stuff no matter how stupid you try to drive the car. On the other hand turning it off = a faster time but if you push too hard you can come off the track

Lift the rear of the car up a little, or lower the front (5-10mm). Either way.

What pads in the rear?

LSD and bit of trail braking will help it turn.

The characteristics sound similar to my car. In that I have chewed up a set of front 595rsr (onto second set) while the rears are still going strong (still on first set).

Bit or trail braking and steering using the right foot seems to work well at winton.

I would try for a 595rsr. Wide as you can get on front, 245. I will be trying that next tire set, if I can.

Lift the rear of the car up a little, or lower the front (5-10mm). Either way.

What pads in the rear?

LSD and bit of trail braking will help it turn.

The characteristics sound similar to my car. In that I have chewed up a set of front 595rsr (onto second set) while the rears are still going strong (still on first set).

Bit or trail braking and steering using the right foot seems to work well at winton.

I would try for a 595rsr. Wide as you can get on front, 245. I will be trying that next tire set, if I can.

The LSD im getting is Quafie so its Helical and acts as a 1 way LSD, the V35 is my daily and I didint want a clunky 1.5/2 way mech diff

still using stock struts/springs so cant change the ride height

Dont have any plans on turning the car into a serious track/time attack car but I do want to be able to get around quickly enough given what the car is, wednesday arvo sprints for me is just a fun day out. Hence the band aid solution

If you are *2 SECONDS* faster with VDC off, then drive with VDC off..... 2 seconds is a MASSIVE difference around QR. Does the car still understeer lots without the VDC getting in the way ?

Now that I think about it I dont think the cars understeering that much, the VDC is however going hyper and constantly grabbing the front left brake which is making the car feel like its understeering more than it is. I like VDC because no matter how stupid you go through a corner its pretty hard to come off. However it slows the car down so thats the other reason why I want R compound on the front so I can have VDC off and have a better chance of keeping the car on the track.

It's understeering, so, if you feel like you're going to head off the track, just ease out of it a bit. I felt that worth mentioning, sounds like you go off quite a bit!? ;)

haha only a couple of times :D

Get the diff installed, it'll fix the inside wheel spinning issue.

Then you can set your sway bars correctly so you don't have to put up with the understeer resulting from your current compromised settings

Then get semis all round if you still feel the need.

The problem with going an r compound on the front only is that for a few laps it'll be great and then the rears will start to over heat and lose traction and before you know it you will be backing it off the track when the rear suddenly lets go at turn in.You will be faster for a couple of laps though. You're also going to destroy the semis as you won't have the right wheel alignment, plus the inherent understeer issue, so it'll chew up the outside of the tyre in no time. 1000 bucks worth of semis might last you 3-4 days.

Get the diff installed, it'll fix the inside wheel spinning issue.

Then you can set your sway bars correctly so you don't have to put up with the understeer resulting from your current compromised settings

Then get semis all round if you still feel the need.

The problem with going an r compound on the front only is that for a few laps it'll be great and then the rears will start to over heat and lose traction and before you know it you will be backing it off the track when the rear suddenly lets go at turn in.You will be faster for a couple of laps though. You're also going to destroy the semis as you won't have the right wheel alignment, plus the inherent understeer issue, so it'll chew up the outside of the tyre in no time. 1000 bucks worth of semis might last you 3-4 days.

Could you please elaborate more on the wheel alignment? V35/350z are heavier cars than the R series skylines

The car drives straight so I havent taken it in for an alignment yet but was going to get it checked anyway when I fitted new tyres to the front of the car which isint that far away

The car drives straight so I havent taken it in for an alignment yet

Tracking straight has nothing to do with a suitable wheel alignment for track. If there is any adjustment, then a track setup would have a bit more camber, possibly slight toe out at the front, and more castor (if that's adjustable). These will all make the car track worse than you good "street" aligmnent, and probably wear tyres a bit uneven. Quite a few people will do this for track days (again, assuming the car has adjustment)

I'm going out on a limb here but how experienced are you at driving? Have you spent many hours belting cars around a race track, or is all of your experience from playstation? Not meaning to be offensive, it's common these days for track day newbies to go balls out, because that's what PLaystations teach us about driving. In the real world, this translates to cars sliding off tracks regularly. Of course there's nothing wrong with spitting the car off the road once you're going as fast as the car is capable. However, just because you went off doesn't mean you reached the car's limits.

If it were a standard car with healthy suspension, I'd suggest to learn to drive it properly. If it's happened since changing suspension settings, I'd suggest you might have upset the balance of the car. In either case, running different spec tyres front to back is only going to mask the real issue, and should be considered as the last option.

Initially, maybe try to keep the red mist at bay, and learn to drive the car fast. This won't happen on one or two track days though, and you might even need to take some driving lessons. I'd be surprised if the V series of skylines had inherently bad handling traits on a race track. They may not be the best behaved car out of the box, but if it's spitting you off the track regularly, then look at your own driving first.

Just something to ponder

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...