Jump to content
SAU Community

Recommended Posts

My car is having issues where sometimes the rev's would just fluctuate by itself and then eventually just cut off (while driving or on idle). I would try to start it up again and it would crank the first 2 times, then eventually nothing would happen when you turn the key (no click, no sound at all).

To get it running again i'd have to get it jump started, then it would run fine.

It's died 3 times already, the past 2 times have been when i've just been on idle but one time it just completely turned off while in the middle of driving.

What could be the problem? any suggestions?

thanks

Edited by tehbebe
Link to comment
https://www.sau.com.au/forums/topic/339974-r33-gtst-cuts-off/
Share on other sites

just remembered as well, when i turned the A/C on (While i was idling), the revs would start fluctuating, would that still be the AAC valve?

and thanks for the link ill check it out :(

i had a stuffed air con compressor and when the car was idling the revs would continuously hunt up and down from 1000 to 500 with the air con on. Air con off it was totally fine. Scrapped the air con compressor, bought a second hand one and runs like a dream now.

This fixed my problem, but sounds like yours cutting out might be more than just this.

  • 2 months later...

my idling is fine now, no problem in fluctuation in revs, but brings me to another problem, after my car has been driven hard, or given instant high revs, or pretty much when it starts to get warm, it just dies on me. If i go to start it back up, it just clicks, it wont start up on me again, eventually if you keep trying to start it up it will eventually die and you wont be able to start it up again unless i get jump leads... but here's the thing, if you pop the hood, let it cool down for about 20 minutes, it'll start up again no problem.

ANY ideas?

if it just clicks it usually means your starter is stuffed. not sure y it wove stop your car tho. does it try and turn ova when you turn the key or does it just tick. sorry bout the last post didn't read yours properly.

  • 2 weeks later...

it still clicks when it dies out but eventually if you keep cranking it, it won't even click at all.. although if i let it cool down on the spot without trying to start it up, eventually it'll start again fine. it only seems to just die on me in hot weather or once ive really 'driven' it. :(

Check simple things like your battery, your earth etc.

Could be a dodgy earth somewhere. Heat creates more resistance

Or could be a couple issues, check cas and afm (check the wiring to the plug as well)

+1

Sounds a bit like an earth problem as the symptoms come and go and affect hot-starting and make it cut out.

Could also be your alternator... Got a volts gauge or one you can hook up? If your getting a flat battery while driving (which seems to be what your describing), it'll cause these symptoms...

it definitely sounds like a battery/alternator issue to me as well. this doesnt mean that either are stuffed, you just need to check your terminals properly.

first thing i'd try is a separate earth from the alternator housing to the chassis and see where that gets you. try use a thick earth wire for this. then try the earth on the battery. if thats no good then get someone who knows how to use a multimeter to test your alternator and battery.

it definitely sounds like a battery/alternator issue to me as well. this doesnt mean that either are stuffed, you just need to check your terminals properly.

first thing i'd try is a separate earth from the alternator housing to the chassis and see where that gets you. try use a thick earth wire for this. then try the earth on the battery. if thats no good then get someone who knows how to use a multimeter to test your alternator and battery.

+1

You'll need to check them while the car is breaking down/driving/under load though, as if it sits and idles ok most of the time then testing the alternator then might not tell you anything...

thanks guys, for the updates... the battery and starter/alternator is one of the first things i checked out aswell since thats what i thought it was in the beginning, some guy checked them with some stick thingy lol and said they were fine and it was "charging properly" then he was like "i dont know much about jap cars, take it to some jap place" so i was like okay cool..... lol

i changed my AFM, cleaned AAC, changed fuel pump and fuel filter.. now i was hitting constant boost while driving home one day and it cut out again, this time cos i was on a main road and by myself i just left hazards on while waiting for a lift to help me out cos usually like i said, if i let it cool down for a good 20 mins - sometimes an hour i can start it up again.. but this time it just completely died on me, so the hazard lights eventually let my car to die, some random came and jump started me and i was able to get home fine.

i can drive the car fine, as long as i dont hit constant boost other wise it will cut out. im gonna try look into buying another alternator and see how that goes, if all else fails, ill try a new battery, umm im gonna also unblock my BOV and just put a proper gasket with a hole in it instead of the plate i have. just a thought.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Jack the back of the car up, pull that wheel off, pull that sensor out, and put a bore scope into the hole to inspect the outer casing, see if anything looks damaged before you pull the whole thing apart.
    • Ergh... So I pulled the speed sensor out again and the tip was shiny so I think it's rubbing the bearing. The bearing contains the magnets for the speed sensor so I think when the first sensor broke it damaged the magnet ring on the bearing.  This is just a Google image, but there is a hole going to the bearing. So when the tip broke off the old sensor I'm guessing it fouled the bearing... As the magnet is only protected by a plastic cover it would be easy to damage it. So I guess I'm doing a bearing again.   
    • My thinking is that if the O2 sensor is shot then your entire above described experience is pure placebo.
    • Here is the mess that I made. That filler there was successful in filling dents in that area. But in the middle area. I can feel dents. And I've gone ocer it multiple times with filler. And the filler is no longer there because i accidently sanded it away. I've chased my tail on this job but this is something else lol. So I'm gonna attempt filler one more time and if it doesn't work I'll just high fill primer the door and see where the issues are because guidecoat is of no use atm.
    • Ok, so I think I sort of figured out where I went wrong. So I definitely overthinked it, and I over sanded, which is probably a large part of the problem. to fix it, I ended up tapping some spots that were likely to be high, made them low, filled them in, and I tackled small sections at a time, and it feels a lot better.    I think what confused me as well is you have the bare metal, and some spots darker and some are lighter, and when I run my finger across it, it' would feel like it's a low spot, but I think it's just a transition in different texture from metal to body filler.    When your finger's sliding on the body filler, and crosses over to the bare metal, going back and forth, it feels like it's a low spot. So I kept putting filler there and sanding, but I think it was just a transition in texture, nothing to do with the low or high spot. But the panel's feels a lot better, and I'm just going to end up priming it, and then I'll block it after with guide coat.   Ended up wasting just about all of my filler on this damn door lol  
×
×
  • Create New...