Jump to content
SAU Community

Dyno Tuning Lessons At Unigroup Engineering

_Wing_

By _Wing_,
in Events Archive

 Share

Recommended Posts

_Wing_ Proficient

_Wing_

Posted
Posted

I organised a dyno tuning lesson at Unigroup Engineering a while back and there's a few people that are keen to go. I had a chat with unigroup whilst I was getting my car fixed there and it turns out we can get one happening in a few weeks time...... towards the end of November/start of December.

There's a few people already booked (some from SAU too) but we just need a few more to get it going and it'll be the last session in the near future, definitely the last one for 2010 and probably the last one for the discounted intro price. Anybody keen to learn how to improve their performance and also do their own tuning?

All the details are here:

http://www.ao-ps.com/dynotuningsessions.html

PS - this isn't for the previous people that wanted to goto the advanced course, they're still waiting on numbers on that one.

  • 4 weeks later...
kazekage Rookie

kazekage

Posted
Posted

Am intersted. Is this a basic or advanced course? Would it suit someone who already has experience self tuning and looking to improve?

Anyone who has done these in the past can shed some light?

Would be interesting learning off a tuner IRL to improve. (although yet am i to blow something up ^^)

_Wing_ Proficient

_Wing_

Posted
  • Author
Posted

The "advanced" course is for those that have previously attended whereas this one here is for everybody that has never been before. There is a number of people that have registered that have done some type of tuning before so you'll probably fit right in with them.

There's feedback on this link (down the right hand side): http://www.ao-ps.com/dynotuningsessions.html

Here is the forum link to the previous session with feedback from the participants: http://www.skylinesaustralia.com/forums/Ha...ce-t308456.html

  • 4 weeks later...
wolverine Grand Master

wolverine

Posted
Posted

For those that attended yesterday a big thank you to Wing and Unigroup.

The tuning workshop was fantastic value.

For me the best concept I grasped was in understanding the combustion pressure changes either side of top dead centre.

A very long and enjoyable day.

ps. straight out of the box the rough tune on DVS32R's car wasn't shabby. :thumbsup:

DVS JEZ Grand Master

DVS JEZ

Posted
Posted

Had an Awesome time at unigroup on sunday,

Yavuz IS the smartest tuner i have ever met.

Best value for money, i learnt alot, we covered in detail every question the group had about tuning.

Thanks for organising it Wing

cheers

Jez

_Wing_ Proficient

_Wing_

Posted
  • Author
Posted

Thanks for a great day guys! I always learn something new and it looks like you guys got what you wanted out of it with all your questions answered :)

A participant said that he was more interested in tuning theory, how an internal combustion engine works on a detailed engineering level, and how not to get fed BS/ripped off by dubious workshops. Even without the dyno tuning training it was well worth the knowledge gained from the day. I agree.

We had guys traveling from as far as the central coast and Canberra to attend but I think WA is a wee bit far lol

Something that may interest people is that Yavuz (head of Unigroup Engineering) is a university degree-certified mechanical engineer, specialising in chassis dyno tuning. He was also recently invited by the University of Technology Sydney (UTS) to present and discuss in nitty gritty engineering detail regarding engine design/tuning, so hats off to him :worship:

  • 2 weeks later...
  • 2 weeks later...
chunkylover69 Enthusiast

chunkylover69

Posted
Posted

Honestly, I think that the "comparison" table on the website is an absolute crock of shit. Seriously if you are going to do that sort of thing you need to compare your service to that of another company, you can't just say "other" because it is a cop out and allows you to write the whatever you want. For example "Q&A time: UniGroup Engineering-Maximum, Other-Minimum" what the hell is that? It is a little dishonest and reflects poorly on your company, if you really stand behind your service you should name another company and compare the two, don't simply compare UniGroup with an "other" company that may or may not exist who just conveniently happens to be the worst company ever. I think you should consider changing or removing this laughable piece of marketing.

In the meantime please continue to enjoy free advertising under the "events" sections of the NSW sub forum.

MrStabby Grand Master

MrStabby

Posted
Posted

went along to this today, time very well spent. Yavuz certainly knows his shit and can explain in words small enough for me.

+1. Highly recommended. Will be back for the Advanced course.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      R32 GTST - 600KW+ RB28/CD009 Build

      By MBS206 · Posted

      Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • f00stx
      Intro/R33 owner

      By f00stx · Posted

      Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • f00stx
      Second time Skyline owner (R33 GTS-T and now a V36 370GT)

      By f00stx · Posted

      Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
    • Kinkstaah
      Jacks that fit under GTR lips that can reach the subframe?

      By Kinkstaah · Posted

      Perhaps the answer is... more jacks!* *proper jacks must be used.  
    • GTSBoy
      Jacks that fit under GTR lips that can reach the subframe?

      By GTSBoy · Posted

      I NEVER think about using a scissor jack unless there is absolutely no other alternative. f**king things are dangerous, annoying and stupid.
×
×
  • Create New...