Jump to content
SAU Community

Ultimate Gtr R34 In Australia

SkylineSky
 Share

Recommended Posts

SkylineSky Rising Star

SkylineSky

Posted
Posted (edited)

Hi Every one, Im selling my GTR R34 Vspec for the first time, this wont come up again so I don't want dreamers or tyre kickers ringing me.

This car has everything with a list a mile long, I have spent over $150,000 on parts alone some you cant even buy any more to make this the best GTR R34 in the country.

I have got all the receipts and the work was carried out by the best in Australia, engine is standard bore 2.6 LTR and makes 510 KW with Dyno sheet at All 4 wheels below is listed just a small version of the work done.

Brand new N1 block

Brand new crank prepped

Tomei main studs and head studs

Tomei rods

Tomei rod bolts

CP pistons

Oversized Gudgeon pins

ACL race series bearings

Tomei oil pump

Hi Octane race sump with swing baffles

ATI 1000 hp balancer

Ferrera oversize stainless valves

Tomei Camshafts 10.8 lift and Tomei shim kit

Ported and flowed head work.

Hypertune custom made intake manifold and throttle body

Custom made mandrell bent intake pipe kit and the biggest Greddy Intercooler you can fit

T88 34D Greddy Turbo with ceramic coated housing and 4" dump pipe

Nismo Aluminium radiator

Aquamist water methanol injection

4" mandrell bent Stainless exhaust system

Holinger sequential gearbox brand new with Tomei shifter and shift indicator

PST 2000 hp carbon drive shaft

Ohlins Flag R coil overs custom made

Project Mu 360 mm front SCR rotors and 6 spot calipers carbon brake pads and spares

Project mu 325mm rear SCR and billet calipers

NPC billet custom clutch and crank trigger flywheel

Ikeya formula adjustable rear suspension arms

PMC surge tank with 2 x 044 bosch pumps -12 fuel lines and speed flo fittings

Rays 57F Prolight 18 x 10 rims and Pirelli P Zero tyres

Genuine nissan Vspec 2 carbon fibre bonnet with original bonnet.

Nismo white dash

Nismo MFD upgrade kit

Nismo Titanium front strut brace

Autronic SM4 with CDI with low/high boost mapping.

Genuine Nismo front bar with original one to go with the car

HKS 23 row oil cooler

PMC custom catch can

Car has been major project and is a absolute great car to drive, am moving onto something else so this is a one time opportunity to own some thing special. HPI wanted to do a feature on it but I declined, paint work is showroom not a mark or scratch on it.

Car comes with a heap of spares including Getrag 6 speed gearbox and transfer case with full PPG gear set and billet selectors, original rear drive shaft, spare Xenon head lights and a heap of other bits.

Price is $140,000 includes everything. Phone Dave on 0412 950192. I will supply all the documentation with the list of parts with invoices and all the work done. I have a lot more photos for the genuine buyer.

post-68282-1287135599_thumb.jpg

post-68282-1287135660_thumb.jpg

post-68282-1287135826_thumb.jpg

post-68282-1287136184_thumb.jpg

post-68282-1287136357_thumb.jpg

Edited by SkylineSky
Link to comment
https://www.sau.com.au/forums/topic/340632-ultimate-gtr-r34-in-australia/
Share on other sites
  • 1 month later...
SkylineSky Rising Star

SkylineSky

Posted
  • Author
Posted

Update on the car, I have had lots of enquiries however only serious were nil....

I have sold the spare gearbox and other parts so the car is now $119,000 with the Holinger.

Give me a call on 0412 950192 if your serious.

SkylineSky Rising Star

SkylineSky

Posted
  • Author
Posted

Thanks Ben, how are you mate... will be down next month and catch up... Will be a sad day to see the beast go to someone else but have got some thing else on the go..

Will refund the airfare to a genuine buyer.. You wont be disappointed..

Marlin Grand Master

Marlin

Posted
Posted

Going great thanks buddy! :(

I think you'll regret selling, but I guess we always do at some stage! Nothings forever :)

Make sure we get together for a brew or three when you're down!

SkylineSky Rising Star

SkylineSky

Posted
  • Author
Posted
Hi Every one, Im selling my GTR R34 Vspec for the first time, this wont come up again so I don't want dreamers or tyre kickers ringing me.

This car has everything with a list a mile long, I have spent over $150,000 on parts alone some you cant even buy any more to make this the best GTR R34 in the country.

I have got all the receipts and the work was carried out by the best in Australia, engine is standard bore 2.6 LTR and makes 510 KW with Dyno sheet at All 4 wheels below is listed just a small version of the work done.

Brand new N1 block

Brand new crank prepped

Tomei main studs and head studs

Tomei rods

Tomei rod bolts

CP pistons

Oversized Gudgeon pins

ACL race series bearings

Tomei oil pump

Hi Octane race sump with swing baffles

ATI 1000 hp balancer

Ferrera oversize stainless valves

Tomei Camshafts 10.8 lift and Tomei shim kit

Ported and flowed head work.

Hypertune custom made intake manifold and throttle body

Custom made mandrell bent intake pipe kit and the biggest Greddy Intercooler you can fit

T88 34D Greddy Turbo with ceramic coated housing and 4" dump pipe

Nismo Aluminium radiator

Aquamist water methanol injection

4" mandrell bent Stainless exhaust system

Holinger sequential gearbox brand new with Tomei shifter and shift indicator

PST 2000 hp carbon drive shaft

Ohlins Flag R coil overs custom made

Project Mu 360 mm front SCR rotors and 6 spot calipers carbon brake pads and spares

Project mu 325mm rear SCR and billet calipers

NPC billet custom clutch and crank trigger flywheel

Ikeya formula adjustable rear suspension arms

PMC surge tank with 2 x 044 bosch pumps -12 fuel lines and speed flo fittings

Rays 57F Prolight 18 x 10 rims and Pirelli P Zero tyres

Genuine nissan Vspec 2 carbon fibre bonnet with original bonnet.

Nismo white dash

Nismo MFD upgrade kit

Nismo Titanium front strut brace

Autronic SM4 with CDI with low/high boost mapping.

Genuine Nismo front bar with original one to go with the car

HKS 23 row oil cooler

PMC custom catch can

Car has been major project and is a absolute great car to drive, am moving onto something else so this is a one time opportunity to own some thing special. HPI wanted to do a feature on it but I declined, paint work is showroom not a mark or scratch on it.

Car comes with a heap of spares including Getrag 6 speed gearbox and transfer case with full PPG gear set and billet selectors, original rear drive shaft, spare Xenon head lights and a heap of other bits.

Price is $140,000 includes everything. Phone Dave on 0412 950192. I will supply all the documentation with the list of parts with invoices and all the work done. I have a lot more photos for the genuine buyer.

post-68282-1287135599_thumb.jpg

post-68282-1287135660_thumb.jpg

post-68282-1287135826_thumb.jpg

post-68282-1287136184_thumb.jpg

post-68282-1287136357_thumb.jpg

Price is now $119,000 as I have sold the other gearbox and other parts.. This is a bargain for this car...

  • 2 weeks later...
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      Kittens in first to claim dominance of the residence, then puppies later From past experience, the other way around can be problematic to say the least  Those weird "Dobby looking"  little kittens are not cheap....LOL
    • MBS206
      NC MX5

      By MBS206 · Posted

      At least yours have parkour down pat. One of mine will still trip over his own shadow and fall over... He's a special type of cat... Ha ha ha
    • MBS206
      NC MX5

      By MBS206 · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      The question then becomes - was there any fluid coming from that hole before you did the rebuild ?    You may not have noticed, of course.   Depending on how you did the rebuild, the possibility has to be considered that somehow (cleaning ?)  fluid entered that hole and is now being 'forced'  out by small movements of the proportioning valve.   From the factory, there's actually a small rubber plug in that hole but with age and under-bonnet heat it's quite common for it to 'go missing'.  That rubber plug is designed to allow the venting process but also to prevent 'stuff' getting to the area (prevent corrosion, etc).   The plug is also not available as a spare part AFAIA. Personally I wouldn't race and buy a new master just yet but keep an eye on the area to see if the 'leak' continues.   If you're concerned about brake fluid damaging nearby paintwork, cable tie a piece of suitable absorbant material over the hole and remove/monitor occasionally.    Operation of the proportioning valve and the brake master itself won't be affected, but also keep an eye on brake fluid level, of course. In terms of a new master, the genuine part is getting expensive, unfortunately.  Amayama is showing AUD900+.   I was searching recently and there's an aftermarket part available from Japan made by 'Parts Assist': https://zenmarket.jp/en/yahoo.aspx?q=BNR32%2bBM50&p=1 Whether it's any good I have no idea, although in my experience Japanese aftermarket stuff is pretty good quality-wise.   The above site allows overseas buyers to purchase stuff more easily from Japan but there are fees and shipping costs, of course.   The original Japanese seller page is here: https://auctions.yahoo.co.jp/jp/auction/p1197401228 Copper/Nickel is fine but I still prefer bundy tube and it's also cheaper.
    • Duncan
      NC MX5

      By Duncan · Posted

      Your chihuahuas look weird!
×
×
  • Create New...