Jump to content
SAU Community

Recommended Posts

i've never owned a turbo before so i was hoping someone could help me out a little..

im running a completely stock 34 gt-t and sometimes on ignition the boost gauge won't move, not even a slight fluctuation, today i was driving and the gauge had been sitting on nothing, then doing 60 it suddenly jumped to about midway up the gauge, stayed at that pressure for 10 seconds, then dropped disturbingly quickly back to 0, im not sure whether it's because i've only started looking at the boost gauge while driving that i've noticed it goes for ages without moving from 0, i can hear the whirring/spooling? sound but without gunning it, cant tell wether it's active. i had a major service (smooth garage) and immbolizer installed friday if thats relevant at all..

basically i'm dumb, is there something wrong? or is that normal behaviour? only just bought it, i'll be pissed if it's already playing up. :whistling: is my best bet getting a compression test?

cheers guys

Link to comment
https://www.sau.com.au/forums/topic/340898-faulty-turbo/
Share on other sites

i've never owned a turbo before so i was hoping someone could help me out a little..

im running a completely stock 34 gt-t and sometimes on ignition the boost gauge won't move, not even a slight fluctuation, today i was driving and the gauge had been sitting on nothing, then doing 60 it suddenly jumped to about midway up the gauge, stayed at that pressure for 10 seconds, then dropped disturbingly quickly back to 0, im not sure whether it's because i've only started looking at the boost gauge while driving that i've noticed it goes for ages without moving from 0, i can hear the whirring/spooling? sound but without gunning it, cant tell wether it's active. i had a major service (smooth garage) and immbolizer installed friday if thats relevant at all..

basically i'm dumb, is there something wrong? or is that normal behaviour? only just bought it, i'll be pissed if it's already playing up. :whistling: is my best bet getting a compression test?

cheers guys

Sounds like your boost sender has a dry solder joint or its your guage. dosent sound like the turbo its just the electronics

Link to comment
https://www.sau.com.au/forums/topic/340898-faulty-turbo/#findComment-5502907
Share on other sites

Sounds like your boost sender has a dry solder joint or its your guage. dosent sound like the turbo its just the electronics

+1

Don't panic just yet. Get the boost gauge checked out. :whistling:

Link to comment
https://www.sau.com.au/forums/topic/340898-faulty-turbo/#findComment-5502912
Share on other sites

34's quite often have dodgey sender units dont they?

If that is indeed what it is, dont panic at all, its a 30 second fix.

BTW, to the best of my knowledge, a turbo wont intermittently boost, it either will, or wont, not both.

Link to comment
https://www.sau.com.au/forums/topic/340898-faulty-turbo/#findComment-5502927
Share on other sites

34's quite often have dodgey sender units dont they?

If that is indeed what it is, dont panic at all, its a 30 second fix.

BTW, to the best of my knowledge, a turbo wont intermittently boost, it either will, or wont, not both.

thats what i thought, is there anyway i can fix this myself? i think supercheap has 60mm gauges i could grab but installing it would no doubt be a nightmare >__< gauges are half the fun of owning a turbo imo

Link to comment
https://www.sau.com.au/forums/topic/340898-faulty-turbo/#findComment-5502937
Share on other sites

I recently re-soldered the dry joints on normsta's boost sender that was doing the same thing.

If you're comfortable with a soldering iron, it's about a 15 minute job to take it out, hit it with the soldering iron and put it back in.

The other thing that normally breaks about the same time is the vacuum hose back to the plenum. It'll often crack when you try and pull the sender out to replace anyway. I'd suggest try changing the vacuum hosing and then if that doesn't fix it, look at hitting up those dry solder joints. It's the three main ones coming back to the plug. There's a thread on it somewhere if you hit up search.

Link to comment
https://www.sau.com.au/forums/topic/340898-faulty-turbo/#findComment-5502942
Share on other sites

i'm in croydon, i found a tutorial about resoldering the three joins on the chip above the front right tire, scared about messing with it, it's under a three month warranty, doubtful but would that cover this?

Link to comment
https://www.sau.com.au/forums/topic/340898-faulty-turbo/#findComment-5503032
Share on other sites

yeah take it to Jenna save some money and she can show you some things about your car :(

uhhh .. what's a car .. I'm just a girl :whistling:

i'm in croydon, i found a tutorial about resoldering the three joins on the chip above the front right tire, scared about messing with it, it's under a three month warranty, doubtful but would that cover this?

You could ask them - couldn't hurt to give it a shot. :blush:

It's pretty easy to do if you have access to a 10mm spanner to unbolt it, and a soldering iron to re-flow the three joins though :P

The hardest part is undoing the damn clips around the edge of the sensor, I always struggle with that bit.

Link to comment
https://www.sau.com.au/forums/topic/340898-faulty-turbo/#findComment-5503038
Share on other sites

to update, i've checked all the cables and the vaccum line as best i can, all in good working order by the look of things gonna try and pry open the boost control chip case and go from there.

Link to comment
https://www.sau.com.au/forums/topic/340898-faulty-turbo/#findComment-5503138
Share on other sites

managed to get a hold of a soldering iron but i can't seem to get the boost unit case open, i don't want to crack or break it but can't seem to find a way of getting it off

edit:

i mean the larger case just above the right wheel, not the part sitting above the engine

Edited by trappedunderice
Link to comment
https://www.sau.com.au/forums/topic/340898-faulty-turbo/#findComment-5503254
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
    • Welcome!  Can't go wrong with a Stag.
    • Looks good. Nice height.
    • Hey all, a little help from the Stagea hive mind plz.. I'm days away from buying either a 2002 Stagea 250tRS AR-X Four, premium leather, power seats and all the old switches etc that go with it, or a 2002 Stagea 250tRS VR-X Four AERO, pov pack, cloth seats etc, with coil overs, sports zorst, comes with original zorst and suspension and parts. (I think I've got the models right?) Both are VQ25DET, have 160000kms, both straight no rust both with $2000+ in recent servicing receipts, both ride on aftermarket 18" rims. The Aero has a replaced turbo as well. I like the cool factor of the Aero car but the AR-X has never been modified. Neither have been driven hardly at all in the last 5 years. Any thoughts on which one or does it come down to personal preference? davemoto 
×
×
  • Create New...