Jump to content
SAU Community

Recommended Posts

Hey all

Have decided that i am going to strip my car and sell off the parts so get in quick.

Car is currently still together but will start taking her apart over the weekend

below is what i have

ITEM : GENUINE HKS 25/30 ( LESS THEN 3000KM ON TURBO, NO PLAY AT ALL )

ITEM : GENUINE HKS SERIES 2 DUMP ( LARGER WASTEGATE PIPE )

ITEM : XSPEED JAPAN STAINLESS LOW MOUNT EXHAUST MANIFOLD

ALL FITTINGS AND LINES

CONDITION : near new

THIS KIT MADE 270RWKW AND 840NM OF TORQUE ON MY BUILT RB24

AWESOME SETUP , INSTANT RESPONSE

PRICE - $2000.00 complete, $1500 for turbo- turbo lines and acuator, $300 hks series 2 dump, $500 for xspeed manifold

ITEM : Siemens 600cc injectors with HKS fuel rail

CONDITION : Near new , cost $1500 less then 500KM ago

PRICE : $ 800 complete

ITEM : Sard fuel regulator ( custom top secret sard special )

CONDITION : NEAR NEW

PRICE : $200

ITEM : Cusco coil overs for r32 ( will fit others as well )

CONDITION : great, no leaks

PRICE : $1000

ITEM : R33 GTR rims and tyres

CONDITION : OK, have a couple scrapes and rash marks

PRICE : $750

ITEM : Custom SPEED LAB front mount 600X330X125 ( BIG )

CONDITION : NEAR NEW, PIPING NOT INCLUDED

PRICE : $600

ITEM : Custom GTR plenum & throttle bodies for RB20 head

MUST HAVE FOR ANY ONE WITH A RB20!! ALOT OF HARD WORK WENT INTO THE MAKING OF THIS. SOUNDS AWESOME.

CONDITION : GREAT

PRICE : $1200

ITEM : Autronic SM-4 with custom RB loom, sensors and LED's

CONDITION : Next to brand new

CAN BE RE PROGRAMMED TO SUIT ANY APPLICATION, WAS TUNED AND AND MADE FOR ALL THE ABOVE ITEMS.

PRICE : $1900 ( sm4 alone is $2300 new )

ITEM : Kaaz 2 way diff with GTR cover plate for better cooling and more oil

CONDITION : GREAT

PRICE : $800

ITEM : R33 GTR V-SPEC front seats

CONDITION : Great, no marks or tears!

PRICE : $650.00 pair

ITEM : R32 GTST front seats

CONDITION : Good for age

PRICE : $100 pair

ITEM : HKS twin plate for RB20 ( may fit other )

CONDITION : Near new

PRICE : $1250

ITEM : N1 R32 head lights ( stand out from the crowed )

CONDITION : Great

PRICE : $400 pair

ITEM : R32 Rear PODS in white

CONDITION : OK

PRICE : $120 pair

ITEM : R32 GTR brakes with sloted rotors and top secret pads

CONDITION : great

PRICE : $600 front and rear

ITEM : Front / reat r32 strut bars

CONDITION : Good

PRICE : $150 PAIR

ITEM : CUSCO r32 brake master stopper

CONDITION : Near new

PRICE : $100

ITEM : BUILT RB24

ENGINE HAS JUST BEEN RUN IN WITH A HKS 25/30 AND IS A ANIMAL!! MADE 270RWKW & 840NM TORQUE !!!! DYNO PRINTOUT PROVEN

BOTTOM END IS BRAND NEW

SPEEDLAB CUSTOM RB24 ( CUSTOM MACHINED R34 GTR CRANK )

GRUB SCREWED CRANK

LINISHED CRANK

EAGLE RODS

TOMEI PISTONS

ARP RACE SERIES STUDS

TOMEI RINGS

PISTONS HAVE BEEN TEFLON COATED

FRESH LINE BORE AND HONE

ACL RACE SERIES MAIN AND ROD BEARINGS

CUSTOM SUMP BAFFLES WITH TRAP DOORS

CUSTOM 9L SUMP

N1 OIL PUMP

N1 WATER PUMP

CUSTOM HKS 1.2MM HEAD GASKET

THIS BOTTOM END HAS BEEN MADE TO STAND BIG HP AND BIG RPM. ONLY TOP QUALITY PARTS FROM JAPAN, USED AND THE BEST MACHINING HAS BEEN DONE.

THIS BOTTOM END HAS COST ME BIG $$$

ENGINE ( HEAD )

FULL RACE PORTING

JUN 272 – 10.8mm LIFT ( BIG ) INLET AND EXHAUST CAMS

JJR ADJUSTABLE CAM GEARS

TOMEI SPRINGS

TOMEI BUCKETS

GREDDY TIMING BELT

CUSTOM OIL DRAIN MACHINED FROM THE BACK OF THE HEAD TO SUMP.

CUSTOM PAINTED ENGINE COVERS

THIS HEAD HAS HAD OVER $7K SPENT ON IT IN MACHINING AND PARTS FROM JAPAN.

THIS WOULD MAKE A GREAT STREET ENGINE OR TRACK ENGINE.

CONDITION : NEAR NEW

PRICE : $7500

ITEM : R32 four door shell

SILVER, BODY IS A LITTLE RUFF BUT STILL PRITTY GOOD CONSIDERING ITS OVER 20 YEARS OLD

1989 MODEL

HYDROLIC HAND BRAKE

ARC FRONT CASTER ARMS

CUSCO UPPER FRONT ARMS

CUSCO REAR UPPER ARMS

CEFIRO ENGINE X MEMBER ( ENGINE SITS LOWER THE STANDARD X MEMBER )

90% OF INTERIOR STILL THERE

99% OF ALL PANELS

BOSCH 044 AND CUSTOM SWIRL POT

D1 DEEP DISH STEERING WHEEL

HEAPS OF OTHER BITS AND PEICES

MINUS THE BELOW

NO ENGINE OR ENGINE RELATED PARTS

NO GEAR BOX

NO DIFF

NO ECU OR WIRING

NO SUSPENSION

NO WHEELS

NO HEAD LIGHTS

COUPLE OTHER SMALL BITS MISSING

CONDITION : OK for age and comes with alot of parts and listed parts not with car

$2200.00 INCLUDING REGO!

OR TAKE THE COMPLETE CAR AND ALL PARTS $16K !!!

LOCATION : ALL ITEMS ARE IN ADELAIDE, POSTAGE AT BUYERS EXPENSE

CONTACT : PM ME

PICTURES : CAN MMS PEOPLE PICS

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

Rims back up for sale due to sale falling thru

gixxer07, PM me your number and ill mms you pics, HKS 25/30 on a sr20 would be pritty good , nice and responsive with a decent power band

hey mate, my mate might be interested in the 33 gtr rims...still got that for sale? if do where are you located and could you please pm me some pics of it? thnx...

ITEM : Siemens 600cc injectors with HKS fuel rail

CONDITION : Near new , cost $1500 less then 500KM ago

PRICE : $ 800 complete

Are these high or low impedance?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
    • It's been quite the ordeal but hey, at least you figured it out.
    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
×
×
  • Create New...