Jump to content
SAU Community

Recommended Posts

Im looking to upgrade my S14 and am looking for some info.

I was planning on buying an S15 as ide prefer a 2000+ model but after looking on carsales there are a number of R33 GTR's falling into the same 15-20k range as an S15. Obviously they are slightly older but well its a GTR.....thats really all that needs to be said.

What are the maintenance costs like when compared with an S15 would it really be that much more expensive assuming nothing major like a blown engine happens?

Obviously a few phone calls to some insurance companies will answer this but while im asking questions does anyone have any idea what the differences in cost for full insurance would be? Im 27 and have never made a claim before. If there is anyone out there a similar age ect ide be interested in what you pay and who your with even if you just PM it to me. Car would basically just end up with some nice wheels, coilovers and exhaust for the first year or so till i pay it off if that makes much difference

And alot of the ads on carsales (like 95%) claim under 100,000k's how seriously should i take that? I will almost certainly stay away from anything with a changed cluster like the Nismo ones ect but is there anything in particular i should be looking for (other then the usual seat, steering wheel ect wear) that will give me an idea of whether they are genuine or not?

Any help appreciated.

Link to comment
https://www.sau.com.au/forums/topic/341294-question-about-gtrs/
Share on other sites

probably 90% of imports have had the clocks wound back, so even if the owner is telling the truth that he hasn't wound the clock back, it was probably wound back in japan.

as for maintanence costs, they aren't too bad, however if you are looking at the cheaper end of the scale of gtr's then you are more likely to get one that is going to have some underlying issues and may cost a bit to fix.

Thanks for the answer, Thats a worry that so many have there clocks wound back. I spose just looking at the condition of the car overall is probably the only real way of guessing how many k's are really on it then.

And yes i realize the cheaper cars would probably be worse condition but ide happily spend more on a GTR then an S15 if i can find one that is in good condition and im looking for one as standard as possible so that should hopefully help keep the cost down abit.

Anything i should especially be looking for to stay away from?

And do many imports come with log books and would you trust them anyway?

Well it would more complicated to maintain than a Silvia. Ya know the so called "technological tour de force" the GT-R is tagged in... But you won't use it as daily driver anyway right? Twin turbo, inline 6, awd, g-sensors, 6 throttle, etc. etc. But bottom line when you own this legendary beast from Japan. It's all worth it. :( If you could find a low mileage BNR32 that would be another option I recommend also. Since we all know what the original Godzilla did in motorsports, while the BCNR33 is treated as the least achiever of the R bros. by critics. Low mileage BNR32s can go as high as 34s in Japan. :D

Edited by GodziRRa

gtrs can be a money drain very easily, fixing or replacing things can cost an arm or a leg.. i'd choose very carefullly, if u go with gtr, hope u handy with spanner as it helps being able to do as much yourself.. also no guarantee r33 motor wont blow up like a r32 so factor in a stash of cash to keep on reserve.. all the best

p.s in regards to insurance, im with shannons, u can opt for the weekend only (limited use) which reduces the premier by a fair bit, otherwise $2k odd in insurance p.a

Edited by BWRGTR
gtrs can be a money drain very easily, fixing or replacing things can cost an arm or a leg.. i'd choose very carefullly, if u go with gtr, hope u handy with spanner as it helps being able to do as much yourself.. also no guarantee r33 motor wont blow up like a r32 so factor in a stash of cash to keep on reserve.. all the best

p.s in regards to insurance, im with shannons, u can opt for the weekend only (limited use) which reduces the premier by a fair bit, otherwise $2k odd in insurance p.a

I dont think Shannons insure anyone under 30

My son is 27 and he's had very little trouble with his R33 GT-R at all.

Admittedly, it's not tracked.

It has had its 100,000km service done through Tune House a little while ago.

If you're interested, it's coming up F/S soon.

* It won "Best R33 GT-R" Award last year in the 10th Anniv R34 GT-R SnS.

a cheap GTR is going to cost you at some point but if you get one in good shape they're no more expensive to maintain than a GTSt or Silvia etc... if driven hard they use more tyres and fuel as they're a heavy car...

the driveline is pretty bulletproof (more than a silvia)... the only thing to really worry about is engine condition... a proper RB26 rebuild is likely to cost you 7-10K... that said if street driven and not thrashed they are pretty tough motors... if your going to track it then its a different story

you might want to look for one that has some of the more expensive wear items replaced recently... clutch, tyres, pads/rotors etc

also Shannons will insure you under 30... I pay $1600 but my car is highly modified and I have it insured for 38K

best bet go to a reputable GTR tuner and ask them if they have any customers who want to sell... that's the best way to find out the condition of the car... from the guys who do the work on it

Well it would more complicated to maintain than a Silvia. Ya know the so called "technological tour de force" the GT-R is tagged in... But you won't use it as daily driver anyway right? Twin turbo, inline 6, awd, g-sensors, 6 throttle, etc. etc. But bottom line when you own this legendary beast from Japan. It's all worth it. :P If you could find a low mileage BNR32 that would be another option I recommend also. Since we all know what the original Godzilla did in motorsports, while the BCNR33 is treated as the least achiever of the R bros. by critics. Low mileage BNR32s can go as high as 34s in Japan. :wave:

however if you were wanting to track it the r33 is a better option. from what i understand they don't have oil starvation issues like the 32's did.

however if you were wanting to track it the r33 is a better option. from what i understand they don't have oil starvation issues like the 32's did.

oil starvation is problem on all rb26's, its the early model 32 that needs crank collar due to short nose, fixed on late model 32 and subsequent 33 and 34 model

I bought a cheapish r32 with a built motor well i thought it had the right gear in but it wasnt serviced probley and ended up needing a rebuild so my cheapish gtr ended up owing me over $35 k thats because i went all out on a reliable motor setup, i love my gtr but it has hurt my back pocket bad it is up to you in the end what ever puts a bigger smile on your face.

Thanks for the info guys.

Im worried now about the whole imports mileage being wound back thing does anyone know if its as easy to wind back the digital type ones like in an S15? Just not sure if they are mechanical still which then converts too digital on the cluster. Guess it would have to be mechanical still somewhere though?

If i go the GTR route i guess i might find the best one i can and see if i can get owner to meet me at a reputable workshop and get them to check it over or even dyno it, might get expensive but still cheaper then buying a dud.

And for those that asked no i dont want it as a track car, just a fun street car. May consider tracking it (circuit or drag) later but would get a decent rebuild if i was gonna go that way.

oil starvation is problem on all rb26's, its the early model 32 that needs crank collar due to short nose, fixed on late model 32 and subsequent 33 and 34 model

yeha i wasn't sure on what the story was with the later ones, but i thought the issues were worst on the r32's, which is what i meant by "from what i understand they don't have oil starvation issues like the 32's did".

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...