Jump to content
SAU Community

Golgo fails EPA noise test with flying colours!


Recommended Posts

OK - so if I had read 91dB, I would have been cross, so to prepare, I fitted a CAT (thanks Gerald) and prayed to JASMA hoping for a legal pass...

97.8dB @ 5400 rpm!

Worth doing, worth doing properly :)

I think that's something like 6x louder than it should be?

The tester liked my titanium system, didn't charge me for the test - and said come back with a stock system for a big tick.

So... does a GTST stock system fit on an R?

Anyone got a stock R system lying around?

BTW: Sounds sucky with a cat. I know what will be going back on when the test is passed. Can't take away Godzilla's fire breathing ability :(

Don't think I just smart ass, but wouldn't it be better sense to make your own and keep it. If you have been pinged for noise once and you plan on going back to original after testing, surely you can see the possibility of getting done again. So! it would make sense to have your own spare stock system hanging around.

My system finished will be 3.5 inch from wategate entry back. 3 inch dump, 1.75 from ext wastegate, then 3.5 all the way including the cat. I'm sure I won't pass noise levels with this, so I will have a 2.75 press bent system on hand for just these occassions.

Guest RedLineGTR

Yah thats cool i know what you mean but honestly 90% of the GTRs i have seen in vic have come of the boat with a aftermarket exhuast...and most people keep it on as long as they can if they get EPA'd then they will look for a stock one. OH well i'm sure it will get sorted out soon.

Also just wondering why would a importer import a container or stock exhaust they make the money with aftermarket parts thats why its sometimes hard to track them down..and with the new importing scheme less stock parts are avaliable. My 2 Cents :)

On the strength of the imports having a/mkt systems, maybe the go would be to strangle the sh1t out of the system at the end.

make up a bolt on for the rear muffler.

Drop the big 4/5 inch canon and put on a restrictive stock muffler, just for testing.

Let's be honwst, for testing nobody care about performance, just limit the noise.

Would be a lot easier than changing the whole system.

James, I understand you have a cat replacement pipe. Why not get another made with some mesh welded in and put steel wool in front of it. Will strangle hell out of it and make it quiet as hell but will be no fun to drive.

Do the testers check the system for cat etc?

Would even a basic restrictor such as this work? even out of just sheet metal.

---

| o |

---

You could just bolt in behind the cat, if it wasn't visible doubt they could tell, and it *should* quieten down the noise. Most silencers I have seen are little different that just reducing the diameter of the pipe.

Jamez..

i have the stock GTS-T system for rainy days :P and what i suggest is that you take your rear muffler out and have a pipe made up to fit the stock muffler to your existing system....

i kept my 3 1/2 inch system, simply took off the rear muffler, had an 'S' pipe made to fit the stock muffler to the 3 1/2 inch sytem, 100+ db reduced to 83db... :mad:

it takes two bolts to undo to replace the beast muffler back on...:(

and you are welcome to borrow my stock exhaust/muffler...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hello First, I apologize if this is not the correct forum. Let me know and I will move it to the correct one. I'm having a problem with the tachometer on my Skyline R33 with an RB25DET Neo engine. I'll tell you from the beginning. I'll tell you from the beginning. I have the RB25DET Neo engine installed in a Nissan Patrol GU, with a Link G4X control unit specifically for that engine,  and I have fitted a Skyline R33 tachograph to the original GU dashboard, but it doesn't work properly. I have the tachometer connected to the positive and negative terminals of the GU panel's wiring, and the signal cable is connected directly to the ECU output pin, but the rpm fluctuates widely. Can anyone tell me if the output signal from an R33 ECU is the same as the output signal from an R34 ECU, or if the voltage and signal type are different? Regards and thanks.  
    • I guess it was the thought about "Oh if I were to drive this everyday". Then no, SL500 I wouldn't really consider lmao. 
    • Yeah actually really fair point. Idk what I was thinking when looking at the SL500. Now that I think about it, I feel like I would have more enjoyment out of a shitbox that I would need to repair than some fancy merc. Although I must admit the SL500 does look quite nice. My bad hahaha.
    • 100% Also "Not wanting to spend money" is THE WORST IDEA IMAGINABLE when coming to a project car of any kind. They EXIST to BURN MONEY. Sure, gas money is a thing. A stock car with the worst fuel economy ever sold would probably be cheaper than modifying a car with FREE petrol for the life of your ownership of it, lol.
    • Amount of time you're being observed by law enforcement is so minute, that you could be a dumb shit 90% of your driving time, and never lose a demerit. You could also be the best driver ever and still get hit with a fine.   When you realise how quickly everything turns from "Wee, we're having fun!" To "oh f**k oh f**k oh f**k", you start to realise the only way to be a good driver, is to not be doing anything dumb or unexpected by normies on the road. You want to go fast, go to the track. Someone there in a 1990s slow POS will also show you how bad of a driver you are as they lap 10 seconds per lap quicker than you can in a car that should be considerably faster.
×
×
  • Create New...