Jump to content
SAU Community

Recommended Posts

Just bought some new rims two weeks ago and had them balanced etc.

Few days ago i noticed that when driving at 100km/h or more that the steering wheel is shaking heaps. Im guessing this is a wheel balance problem, now to the question.

Is there a special way to balance or align the steering on r33 skylines due to the 4 wheel steering etc?

Anyone recommend a place to get it done?

The car is has standard suspension etc.

Link to comment
https://www.sau.com.au/forums/topic/34238-wheel-balancing/
Share on other sites

Umm no, sounds like a wheel balance problem still. Wheel balance problems generally manifest themselves most at around 90-110km/h depending on the car/rim/tyre. Id say you need to get them rebalanced.

Perhaps one of the new weights they put on has fallen off?

Or they dont know what theyre doing.

Link to comment
https://www.sau.com.au/forums/topic/34238-wheel-balancing/#findComment-686222
Share on other sites

I wouldn't be getting rid of the HICAS.. Tyrepower in Canning Vale can align the 4ws properly - they've had enough practice with pauls car.. :mad:

BUT - I would agree with red - it's a wheel balance problem by the sounds - not an alignment problem..

Link to comment
https://www.sau.com.au/forums/topic/34238-wheel-balancing/#findComment-686251
Share on other sites

i have a similar problem and no matter how many times my wheels get balanced in aligned it doesnt get rid of it. Mine is at 120km/hr (not that i do that often :Paranoid: umm yeah strictly country roads)

Weird thing is ..... it wont do it at 115km ..... and when you get to 125km it stops ...... its just when it hits that 120km hr the steering wheel becomes a shaking shuddering mess.

:confused:

Link to comment
https://www.sau.com.au/forums/topic/34238-wheel-balancing/#findComment-686274
Share on other sites

When my car got here from japan it had a very bad vibration at over 80km/hr. they aligned/balanced the wheels during compliance but it was still playing up. in the end it was the tailshaft, we pulled it out and had all 3 uni-joints in it machined out and replaced and all was fine again. But it does sound like an alignment problem, get that done first as its cheaper than pulling the tailshaft off and getting that fixed, to give you an idea it was $120/joint and there was 3 joints... not to mention the time taken to remove the tailshaft.

Link to comment
https://www.sau.com.au/forums/topic/34238-wheel-balancing/#findComment-686302
Share on other sites

Alright thanks guys.

First plan is to take it back where i got it balanced the first time and do it again, they didn't do it right i think so they can have another go. If that doesnt work then might try the canning vale tyre power.

Otherwise pray to god the driveshaft isn't warped or whatever.

Link to comment
https://www.sau.com.au/forums/topic/34238-wheel-balancing/#findComment-686365
Share on other sites

i would vouch for tyrepower in canning vale as well.

they take like an hour to do it

and they do say that they cant do it 100000% because of the hicas.

but goddamn i drove my car for yonks afterwards and it never shuddered, vibrated, moved left or right of its own accord.

it was perfect. especially compared to before

go to them

Link to comment
https://www.sau.com.au/forums/topic/34238-wheel-balancing/#findComment-686589
Share on other sites

Sounds like a HICAS problem (4-wheel steer). Get it removed ASAP; it likes to alter the back end when you want it least.

Shouldn't you at least drive a Skyline with HICAS, and understand how it works, before you start recommending surgery like this? Not that HICAS is gods gift (hey, I removed mine this week), but its sounds like you're flying by night here...

Link to comment
https://www.sau.com.au/forums/topic/34238-wheel-balancing/#findComment-689876
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...