Jump to content
SAU Community

Recommended Posts

  • 2 months later...

As this car ways a little over 1000 kg the rb20 will pull it along just fine for now. I do want se traction after all :P I will prob buy a rb25 later and open it up then fill it with goodies to make it nice and strong. From what I understand the rb20 can take more punishment than the other rb engines in stock form.

Link to comment
https://www.sau.com.au/forums/topic/342533-rb-240z/page/2/#findComment-6152440
Share on other sites

The RB20 should serve you well for the time being, but if you do find yourself wanting some extra power then i would advise going with a RB25 like you mentioned above. Sure you can get good power from a RB20 but with the money thats needed to do that your better off with a 25.

And i take that from the pictures above your painting the car green? What's your reasoning behind this? It looked really nice in black.

Once again, lovely looking car, is going to be a beauty when its done.

Link to comment
https://www.sau.com.au/forums/topic/342533-rb-240z/page/2/#findComment-6153145
Share on other sites

As this car ways a little over 1000 kg the rb20 will pull it along just fine for now. I do want se traction after all :P I will prob buy a rb25 later and open it up then fill it with goodies to make it nice and strong. From what I understand the rb20 can take more punishment than the other rb engines in stock form.

the lime yellow or green as you call it is its original colour and it is rather rear in australia. I know its not every ones cup of tea but i like it.

Personaly I dont like black cars. I think it is a boring colour its way too hot especially in an old datsun with a huge trans tunnel and no air conditioning

and black is way to hard to keep clean

here are a few more pics of todays progress

I might even get the body painted next week ;D

IMG_1185.jpg

IMG_1184.jpg

IMG_1183.jpg

IMG_1182.jpg

Link to comment
https://www.sau.com.au/forums/topic/342533-rb-240z/page/2/#findComment-6153694
Share on other sites

  • 2 weeks later...

Very Very nice project. My brother had one in that "Lime green" colour when I lived in the States. I still have a '70 240Z sitting in a garage at my mum's place in Seattle. One of these days (when I have a bigger garage) I'll bring it here and do something similar to you.

Can't wait to see some vids of this car running around a racetrack! Keep up the good work.

Link to comment
https://www.sau.com.au/forums/topic/342533-rb-240z/page/2/#findComment-6169038
Share on other sites

  • 1 month later...

awsome man,

I remeber seeing a s13 in japan with a 240 front on it looked fkn sick.

theres a 260 here in town i keep seeing driving around id love to buy and drop a 26 in it.

good luck with the project

49585469.png

irt355nsimg600x45010676.jpgUploaded with ImageShack.us

Link to comment
https://www.sau.com.au/forums/topic/342533-rb-240z/page/2/#findComment-6248986
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...