Jump to content
SAU Community

Recommended Posts

Hey guys,

im after a little bit of advice.

Im currently looking at an r32 for sale, and for the record im an s13 boy .. i sold my previous car and did months of research on these cars and watched the market closely to see prices and whats avaliable.

Anyway by mistake i came accross an r32 gtst (type m) for sale which has caught my eye and im very interested in it- it is 5speed has pod filter BOV and exhaust. however i havnt been baying much attention to skylines these last few years as it was more of a "dream" to own a r32 then a reality.

Basicallt this is the first car ive looked at since the sale of my previous, so im hoping im not jumping the gun on this, but i guess im just after some advice.

I am unsure of the prices of 32's and if they vary in price from state to state??? Can anyone shead any light on this for me?

The guy is asking 12,500 for it and it needs some body work as it has hail damage .. however its just a cosmetic thing, and i can fix it at a later date.

I guess i need advice on what to look at when buying an r32, where to check and stuff. the guy told me it was just his daily driver, and appears it is just that and hasnt been drifted and trashed from what i can tell (apart from when it was in japan)

its done 106,000kms and its just had its 100,000k major service with the timing belt (chain?) replaced. hasnt been boosted.

Uhmm.. i guess thats it for now. just need to know what to look at and need to know if the price is good.

also i havn't been up todate with the new import laws for r32s.. does anyone know where its headed? as i dont wanna go spend 13k and find out in 6 months every man and his dog can pic up a complied 32 gtst for 7-8 grand

Thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/34281-r32-advice-s/
Share on other sites

Generally, good-condition R32 GTS-t's go for around $15k. The imports laws are set to change at the end of this year, meaning that it will cost a lot more to import the R32.

And I doubt you'll be able to pick up a complied GTS-t for $7k-$8k; a decent example would be about $10k complied (inc. a service and those 'little things').

Link to comment
https://www.sau.com.au/forums/topic/34281-r32-advice-s/#findComment-687291
Share on other sites

Check for worn shock absorbers (normal for a car that age), oil quality/condition (some people have no idea when it comes to putting the right stuff in), steering (the HICAS could be stuffed), keep your ear out for a 'knocking' sound coming from the engine (improperly tuned), as well as the turbo itself. Those ceramic wheels can get a little iffy when boosted too high.

Link to comment
https://www.sau.com.au/forums/topic/34281-r32-advice-s/#findComment-687514
Share on other sites

i have had climate control problems with my aircon... but as long as the car is well maintained... R32's are a good choice dude...

I have the King of the R32.... 93 vspec... brembo's standard.. :P if u can.. save up for a GTR dude... cause i knew i would always regret getting lower range model..

Good luck.. and work harder to save for the GTR dude

Link to comment
https://www.sau.com.au/forums/topic/34281-r32-advice-s/#findComment-688526
Share on other sites

- cold starts can be a problem that many people have found so check that out

- rb20's are realiable and should not be burnign any oil at all. if its not on full when you check the dipstick, question it...

- same for trannie fluid. if it ain't pinkish then question it (of course if he says he hasn't changed fluid in 20,000kms then probably won't be but you may catch him out)

- climate controls can give way (screens go blank) but doesn't happen to everyone. just play around with it a bit to make sure it all works

- make sure there's no water in the boot or spare tyre

- make sure its never been boosted above 14psi as this will cause the stock turbs to sh1t itself

that price seems OK as long as there's not too much body damage... remember that the condition of the trim must match the kms orr something dodgy is going on

you won't regret looking into an rb20!!!

Link to comment
https://www.sau.com.au/forums/topic/34281-r32-advice-s/#findComment-688937
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...