Jump to content
SAU Community

Recommended Posts

Hi Guys,

I need some help here. I recenly bought a skyline 93 GTST. I just brought my car to Autobahn today and they list the problem as below which is the most expensive things---Suspension and Brake:

Oil Leak from motor cost $95 just to wash the motor and further cost of changes.

Both outer tie rod ends boots split---$330

Front Catsre Arm Bushes split---$500

Rear Shocks leaking, replace---$535

Brake Pad and Rotor Change---$500

Its like costing me more than $2000 (as i still haven't mentioned others)

My Question is

Does outer tie rod ends boots, Front Catsre Arm bushes and Rear shocks have to be changed? If i don't change, is that still ok to run?? As far as i know it will just affect the wheel alignment and a bit uncomfortable.

Also, Is that worth to pay $90 just to wash the engine and inspect where the oil leak is??? Be Honest, Its not really that serious leaking, so is that common in most of the skyline??

The Brake pad and rotor is ok for me to change as it is the common things...

Please help me...i just want to know is that worth to change the whole suspension system or its ok for me to run normally on the road.

Thankyou thankyou thankyou!!!!!

Boots split (replace at some stage so dirt and grime don't chew out seals and bearings )

Caster arm bushes split ( will affect alignment as it get worse)

Engin bay ( buy some degreser and a weed sprayer from buntings cleans up nice ) probably just your rocket cover gasket

Shocks learning ( replace asap as this will affect traction and can be dangerous !!!)

Thx a lot mate. It is so useful to me. Just the cost is a bit too expensive ($1600 just the suspension parts), I still can drive normally if i don't change the suspension right? I mean the diff will be only a bit hard to turn and control the wheel..but it won't make my car go diff direction worst to worst, is that true???LOL :devil:

Boots split (replace at some stage so dirt and grime don't chew out seals and bearings )

Caster arm bushes split ( will affect alignment as it get worse)

Engin bay ( buy some degreser and a weed sprayer from buntings cleans up nice ) probably just your rocket cover gasket

Shocks learning ( replace asap as this will affect traction and can be dangerous !!!)

If it were me I would look at the tutorial section and do it my self as it will save money . As long as your oil isn't running out weekly I wouldnt worrie for now ! Your leaking shock and caster arm bush would be the first thing I replace asap then fix the leak in the Engin bay and for now just cover the split in your tie rod end boots with gaffa untill you can find some in good nick at the wreckers . I wouldn't advise driving with split caster bushes and leaking shock for long as I said they will only get worse .

Give your Engine bay a good clean with truck degreaser and find out if that leak is bad or not !!!

What a rip bro, I bet you $10 that oil leak is your rear main seal. That's a gearbox-out job. You should replace your shocks if they really are leaking, and replace those bushes, they will greatly improve your handling and ride. It's pretty easy to do as well...

I'd take your car elsewhere as it sounds like your getting ripped.

Tie rod end boots, provided the tie rod end isn't worn you should just be able to fit new boots (alot less than $330), seems like they've quoted you for new tie rod ends? Did they say if they were actually worn?

Front caster rod bushes split, $500? :devil: I did mine recently, the bush kit was $90 trade, maybe $120 retail? Takes half an hour to undo the bolt and two nuts, press out the old bushes (unless it has after-market ones already), fit the new ones and refit the rods to the car.

Rear shocks leaking, get it done. $535 to remove the back seat, shocks, compress and remove the springs and change the shocks over, including parts and labor is reasonable, provided they're fitting a good shock.

Brake pad and rotor change $500? Standard rotors and pads or?

Then a wheel alignment as is always required with suspension/steering work.

Its a big help for me. Thx a lot. The tie rod end boots is quoted as a new one. They said it is split. The Front caster rod bushes..can you tell me what equipment do i need to fix it by myself?? They put the wheel nuts real hard...I kw all the equipment won't be cheap...i mean at least cost me $300 to buy the set. But i just can't unscrew the nuts with a manual spanner.haha,maybe need a electronic one. The Rear Shocks....that's the hard bit...I don't think i can handle this part as it has many steps. The Brake is the standard one as they said...If i can unscrew the wheel, I would rather do it myself as well~

I'd take your car elsewhere as it sounds like your getting ripped.

Tie rod end boots, provided the tie rod end isn't worn you should just be able to fit new boots (alot less than $330), seems like they've quoted you for new tie rod ends? Did they say if they were actually worn?

Front caster rod bushes split, $500? :devil: I did mine recently, the bush kit was $90 trade, maybe $120 retail? Takes half an hour to undo the bolt and two nuts, press out the old bushes (unless it has after-market ones already), fit the new ones and refit the rods to the car.

Rear shocks leaking, get it done. $535 to remove the back seat, shocks, compress and remove the springs and change the shocks over, including parts and labor is reasonable, provided they're fitting a good shock.

Brake pad and rotor change $500? Standard rotors and pads or?

Then a wheel alignment as is always required with suspension/steering work.

If your unsure about any part of it, don't do it. Best bet is to find someone from here in your area with a bit of mechanical knowledge and tools, better off paying them a couple hundred for their time to do the work than have something go wrong. Or take your car to another shop and get it re-quoted (preferably somewhere that regularly works on imports) to see if they can save you a few dollars.

Just get a big long fat torque shifter to break those nuts... I'm pretty scrawny and I managed to break locking wheel lugs that some retard used an impact gun on. All you need is a socket set really. Rear shocks are piss easy btw, not sure what you have to take out in a 33 to get access to strut bolts but I just needed to take off most of the interior boot trims. That's 2 bolts there, and undo another bolt at the bottom of the shock and it just slides out!

Thx for all you guys supporting~I think i will sell it at last. I mean after I pay for 2k in my 93 Skyline, I don't mind, but other parts may start having problem as it is a 93 model and every parts get wear. Do you guys pay high maintainance fee on Skyline series 1 model???

If your unsure about any part of it, don't do it. Best bet is to find someone from here in your area with a bit of mechanical knowledge and tools, better off paying them a couple hundred for their time to do the work than have something go wrong. Or take your car to another shop and get it re-quoted (preferably somewhere that regularly works on imports) to see if they can save you a few dollars.

some of those things are jobs you can to with minimal knowledge and tools.

You could EASILY cut that in half if you have a friend with a couple of basic tools and a spare weekend!

DONT JUST ALLOW YOURSELF TO GET BEND OVER LIKE THAT

I might be wrong, but it sounds like you took your car to Autobarn, which is a parts store. They came out and looked at it, and offered to sell you some parts. Perhaps they exaggerated the costs because they want to err on the safe side. Either way, you need to see a mechanic. If the guy offering to fix your car doesn't have oily hands from working on cars, you need to find help elsewhere.

I agree, the costs estimated are far too high. Castor rod bushes - $100, Steering boots - $40. You could probably get a decent set of second hand rear coilovers for $300 as well, which are best to source from a jap parts wrecker as if they're leaking/blown you can agree exchange (try to make this arrangement prior to purchase).

As for the leaks, just put some cardboard on the floor where you park, monitor the oil and other leaks, and track down their location yourself if wanting to save cash.

Also, do as much research as possible. READ A LOT of technical articles and learn about your car, or you will either:

a) be ripped off by unscrupulous people in the trade who get a sense of how little you know; or

b) have to be spoonfed all the information you need while lacking true peace of mind of how things are running so you could enjoy your driving with safety and confidence.

Hi, just one thing i am worrying about now. My friend is a mechanic and he told me that if i not changing the split outer tie rod ends and the caster arm bushes, my car can lost control very soon (meaning no steering power) and the worst case is the wheel can come off. Is that true???

I might be wrong, but it sounds like you took your car to Autobarn, which is a parts store. They came out and looked at it, and offered to sell you some parts. Perhaps they exaggerated the costs because they want to err on the safe side. Either way, you need to see a mechanic. If the guy offering to fix your car doesn't have oily hands from working on cars, you need to find help elsewhere.

I agree, the costs estimated are far too high. Castor rod bushes - $100, Steering boots - $40. You could probably get a decent set of second hand rear coilovers for $300 as well, which are best to source from a jap parts wrecker as if they're leaking/blown you can agree exchange (try to make this arrangement prior to purchase).

As for the leaks, just put some cardboard on the floor where you park, monitor the oil and other leaks, and track down their location yourself if wanting to save cash.

Also, do as much research as possible. READ A LOT of technical articles and learn about your car, or you will either:

a) be ripped off by unscrupulous people in the trade who get a sense of how little you know; or

b) have to be spoonfed all the information you need while lacking true peace of mind of how things are running so you could enjoy your driving with safety and confidence.

My friend is a mechanic...

How much time can he spend with you and your car?

Let him pore over your report > get the parts > get to work with him: don't just watch him > pay him > you save anyway + you learn heaps. :blush:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...