Jump to content
SAU Community

Recommended Posts

for sale a r33 gtr vspec in parts

was going to be a track car but had a marage break up so it was sitting in my shed till i got the fiances soughted but some 1 decided to borrow it when i was away

big front end damage came back from holidays to find my car was f**ked froma hit a telegraph pole let me no what you want of the car

lots cant be saved

no reasonable offer will be refused not really shaw of what is good prices for things make me a offer and we will go from there thanks for your time tim

post-41983-1289196496_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/343505-r33-gtr-vspec-for-sale-in-parts/
Share on other sites

pretty standard only mods are trust t517z 10cm turbos 1 with brand new center price 2000 ono

standard turbos $400

and an digital speedo of some sought $50

the block is stuffed but the head is fine $1000

box is in good condition maby slight 2nd gear syncro wear but could of been that the clutch was stuffed $1000

brakes $800

passengers door $200

boot and wing $500

lots more just have to go through it tell me a part you are after

please let me no if these prices are to dear its been a long time since ive had any thing to do with the car im open to negotiate

and location is blaxland blue mountains thanks tim

Rear diff?

the rear diff is still on the car but might be a little while till i have time to remove it depends if you are in a rush for a diff

and it is for sale thanks tim

Picked up the brakes and inner guards today - both were in good condition.

Tim was easy to deal with. The car took a big hit on the front but otherwise it is in good condition eg the doors, boot and wing, tail lights, rear bar, diff, gearbox etc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...