Jump to content
SAU Community

Recommended Posts

that doesnt make it legal, if you are running another intake mod already ie. front mount that box wont save you from anything. Not sure where your from but in vic anyway.

if you have ONLY a pod filter you dont HAVE to box it for any other purpose then heat soak, which for day to day use is barely worth losing sleep over.

+1 i agree with alex...not worth it..i was think of making one myself...but when my mate done his and th rouble he went through to do it, it wasnt wroth it and it made hardly any difference..

also about it being legal, if the cops know what they looking at, they can easly ask you to show whats inside the box...if there is a pod, bam they will get you for it....well thats what i know....can be wrong...

Fair enough, so what could i do for a cold air intake system without cutting holes?

I've tried putting the pod behind the front bar but when it rains the pod becomes wet.

If anyone has any previous experiences/setups let me know cheers.

Edited by fly333

like james mentioned, check the DIY secition and the guy with username WYTSKY made on for his car and i am pretty sure the cops didn give him troubles...if you not as much of a handy man, i think he can make you one for some extra cost...

here is the link to his DIY

http://www.skylinesaustralia.com/forums/Ne...&hl=air+box

Fair enough, so what could i do for a cold air intake system without cutting holes?

I've tried putting the pod behind the front bar but when it rains the pod becomes wet.

If anyone has any previous experiences/setups let me know cheers.

just use the factory airbox?

solves your problem, works perfectly fine, and then let's you run a FMIC.

win win win really.

^^ What Ash said or,

Remove the heat shield or make hole in the heat shield and put your stock cold air take back on so it feeds air to the pod.

If you feel the need to still have a pod on.

Hi and thanks but wont it be illegal to have a front mount and pod ?

to what i know it is...thats why just get a standard air box...they work perfectly like ash said...his car is a rally quick track car and he uses standard (i think) coz they are better...i have spent money into going standard...so if you are spending money and dont have standard box go standard...otherwise leave it standard... ;)

I've got a proper made one had it for 2 years now and i havent got harrassed. its not legal no because techically your hiding youd Pod filter or one of ur supposed 2 intake mods second being your cooler or CAI. u get caught go put airbox back on and done.. if u have one

Nice mod Arthur...but if you're going to do that, you might as well just use a panel filter? I though the whole point of the pod was to have a loud intake sound...is that any louder than the factory airbox?

LOL NICE.. shine torch down their though gg

Yeah am in process of trying to make some plastic covers as u can just see the filter poking out,

Also to cover the old cooler pipe holes..Bit trickier than i first anticipated, but ill get there..

Edit 4 birds..yeah bottom of airbox is cut out, you can hear it and it draws air from the holes underneath where the cooler pipes used to be as well as the snorkel..I ran it for a bit with panel filter and box stock but it didnt feel as quick..

Edited by Arthur T3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
×
×
  • Create New...