Jump to content
SAU Community

Recommended Posts

I have the following rb20det parts for sale;

- rb20det/rb25det Cometic triple layer stainless exhaust manifold gasket $80ono

- Rb20det crank rods and pistons in good usable condition offers...

- rb20det red top injectors 240cc good upgrade for non turbo rb20 suitable replacement for rb20det $60

- inlet plenum rb20det top halfs x4

- inlet plenum rb20det

- rb20det gts4/gtst bonnent holder good condition $40

- gts4 diff half shafts 2 sets offers

- rb20det cam angle sensor CAS $80

- rb20det throttle body and tps throttle position sensor $60

- rb20det knock sensors x6 20 each

- ignitor module offers

- rb20det sump gtst x3 offers

- rb20det oil pickup x3

- coil packs x6 $120 ono 80ks gts4 later model ones much stronger have a coiled spring and no lead inductor same plug all lines up with any rb20det etc

- r32 wiper bottle tank with twin pumps factory in good condition no cracks or scale 100ono hard to find in good condition

and plenty more i cant think of trade and/or cash for q45 or z32 afm with plug rb26 ballast resistor pack rb25det stainless front facing plenum rb25det series 2 ecu and loom adjustable cam gears always keen to do deals.

cheers

Lagperformance

0450 728 189

Link to comment
https://www.sau.com.au/forums/topic/344080-rb20det-parts/
Share on other sites

  • 2 weeks later...


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...