Jump to content
SAU Community

New Stagea Owner

SHETLANDER

By SHETLANDER,
in Four Door Family & Wagoneers

 Share

Recommended Posts

SHETLANDER Collaborator

SHETLANDER

Posted
Posted (edited)

After 2 years of not owning a rb powered car, ive purchased a 1997 Rsfour Stagea in a red colour, it is completely standard but has a dayz sticker on the back, done 132000kms. It needs a little bit of a clean up and a few bits replaced (needs a new front bumper) but other than that its good.I pick the car up next weekend

Edited by SHETLANDER
Link to comment
https://www.sau.com.au/forums/topic/344270-new-stagea-owner/
Share on other sites
SHETLANDER Collaborator

SHETLANDER

Posted
  • Author
Posted (edited)

I picked it up yesterday and did the 200km drive from Hobart to Launceston without any dramas and it was pretty good on fuel though, 1/4 tank used on the way up. Today i gave it a wash, the previous owner had owned it for 6 years and dont think it ever saw water or a sponge, its going to need some parts resprayed as the paint is faded badly and some parts on the sideskirts and rear plastics are worn. It also has a non turbo front bumper on it without any air dams or openings on it as the previous owner broke the old one. The Dayz sticker on the back is just a sticker, dont think there are any Dayz options on it. It has the standard 15 inch wheels, 132000kms, all the electrics work. massive quantity of documents about service history and parts been bought. No rust under wing mirrors or strut towers. Im going to get some photos of it up soon and then slowly get it modified a little.

Edited by SHETLANDER
DaveB Mentor

DaveB

Posted
Posted
... The Dayz sticker on the back is just a sticker...

Well pretty sure it has dayz sideskirts; and perhaps it had a lower lip spoiler before the previous owner broke it? Well done on your new RB - I think a Stagea is a fine vehicle to put one in too :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • GTSBoy
      My BMW 335i

      By GTSBoy · Posted

      Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • Duncan
      R33 Fuel Pump & Brakes after alarm swap

      By Duncan · Posted

      I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • Kinkstaah
      My BMW 335i

      By Kinkstaah · Posted

      I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...