Jump to content
SAU Community

Recommended Posts

vettel's off the hook.

statement from the FIA read: "Having heard from the driver and team manager, and having noted that Car 1 started what was its fastest qualifying lap with 17 seconds to spare prior to the chequered flag, the stewards determined that no advantage was gained when car 1 left the track.

"Accordingly no breach of Article 20.13 occurred on this occasion and the stewards decide to take no further action."

Edited by tweety bird

I think more so because LH won't be able to look after his tyres given the way he sets the car up. His best hope is to get a very sizable gap off the start and hope McLaren can find a nice big hole to drop him in (and hopefully away from Massa).

If he can control himself for 2hrs he might get away with the race.

due to his ability to look after tyres?

yes, but more of that i don't think the rest will look after there tyres.

it's going to be a race about tyres, redbulls are hard on there tyres so are the ferraris, mercedes will be strong here but are unlikely to pose a threat and hamilton well.....

you know what im going to say. :)

If he can control himself for 2hrs he might get away with the race.

I predict Ham will just drive away from the field in the opening stage of the race.

Jenson will pass Vettel and stay P2.

Seb will be on the third step of the podium and inconsolable.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...