Jump to content
SAU Community

Recommended Posts

would change AFRs aka just dump in more fuel making the car richer.

that's that i would guess for $12.

Exactly. Tricks the car into thinking it's colder, therefore dumping more fuel into the engine. Will it work? Marginally. Is it terrible for your engine? Well...

Link to comment
https://www.sau.com.au/forums/topic/344550-what-is-this/#findComment-5553410
Share on other sites

It changes the signal for the coolant temp sensor not the air temp.

But yeah...cant see it doing anything other than washing all the oil off the bores and ass raping your engine with a pineapple attached to a jousting stick.

Link to comment
https://www.sau.com.au/forums/topic/344550-what-is-this/#findComment-5553795
Share on other sites

It will modify any standard ECU by telling the ECU that the incoming air in the intake system is cold

description makes it sound like it's for a air intake temp sensor.

you could essentially just unplug your coolant temp sensor though. will have the same effect. the thing is though, on long trips it may really affect fuel economy if the resisitor in the little box (that's all they are) made the ecu think the engine temp was so low that it ignored the o2 sensor and just ran on the cold start enrichment maps.

Link to comment
https://www.sau.com.au/forums/topic/344550-what-is-this/#findComment-5554012
Share on other sites

also won't work on rb20 or rb25 powered cars as they don't have an intake air temp sensor.

i'd also like to know how adding in more fuel (which they say happens in the explanation) equals better fuel economy, lol

I knocked my temp sensor off one day to the ECU, car wasn't too happy about it once warmed up.

Link to comment
https://www.sau.com.au/forums/topic/344550-what-is-this/#findComment-5554024
Share on other sites

It could and has worked before.. you just gotta know what it actually tries to do so you don't expect too much.

Generally these resistor/chip/box mods will tap into the coolant temp sensor and lower/raise the resistance value fed into the ecu (depending on the type of sensor you have - some go higher when hotter whereas some go lower when hotter), then once the ecu picks up that the car is supposedly running in a cool environment, it will advance the ignition timing to suit equaling more power.

The main thing it depends on is your OEM ecu having ignition timing advance for colder situations - if the ecu has that and you install this crap correctly, then it will work to an extent.. much like driving some bog stock normal car in 10degree night weather vs a hot summer day (taking into account the air is less o2 rich during your testing the device vs driving during a really cold night and also heatsoak).

You can potentially save fuel by having to be on the gas a little less going up hills or maintaining speed etc as your car will have slightly more torque so you do not need to depress the throttle as much as before the 'mod'.

Long as you have basic electronics understanding, how car systems/ecu works etc, you can do this for a couple of bucks (buy a pot to see which resistance value gives best results then buy a simple resistor in that value).

While it may seem like i'm giving this a good rep.. nope not at all (not saying it won't work either because done right it will as long as your ecu has timing advance for colder running situations, a coolant temp sensor and a conservative factory tune). But it's sometimes nice to know the theory behind things.

Link to comment
https://www.sau.com.au/forums/topic/344550-what-is-this/#findComment-5563746
Share on other sites

most ecu's add more fuel when cold, as well as possibly adding more timing, so when at full throttle you will use more fuel, and when cruising you may simply use the same amount of fuel. all in all though, you would normally see worse fuel economy with something like this. i've had cars with dodgy thermostats making the car run cooler and fuel economy was better once the thermostat was replaced.

Link to comment
https://www.sau.com.au/forums/topic/344550-what-is-this/#findComment-5563937
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...