Jump to content
SAU Community

Recommended Posts

i have a small tranny cooler from super shit in my return line, works well. before that the pump used to start cavitating on hot days after half an hour or so of light driving, now it takes a really really hot day for it to do it.

Where did you mount it?

  • Replies 113
  • Created
  • Last Reply

Top Posters In This Topic

Thought about that, it makes the filling of the surge tank even more critical because if the tuner is able to push it all harder and the turbos aren't maxed out yet then something has to happen with the lift pump aswel so where does it end

Bigger feed pumps will help outright power of course, Paul and I are both hoping that 2x 044's are enough to max out GTRS's on e85 :(

Good thing for me is that his tune will be before mine (his is booked for tuesday) so if it doesn't work for him I've got the chance to fix the problem on mine quickly :)

Hi guys,

Im about to start playing with E85 myself but only running a gt35r, nothing as big as some of you guys.

Will 2x 044s be sufficient enough to get the maximum out of my turbo? rb30 as well.

Also what do people recommend for fittings and lines to make sure the smell of fuel is avoided? i understand if you buy generic it tends to leak the smell out. And what type of lines should i be using for e85?

Oh and how big of a surge tank do ppl recommend?

Edited by Jap_Muscle

I have a GT35R (soon to be GTX) and i have 2x044s, no way will i max them, even with 2bar of boost.

To avoid the smell completely you will need to mount the fuel system under the car.

I replaced all standard rubber lines with braided stuff and used speedflow fittings.

I recommend a good quality washable fuel filter.

My surge tank is about 3L capacity.

Have u detected even the faintest smell of fuel?

Reading on prev posts do you feel that your 3L surge is adequate?

How much did the complete replacement of lines set you back? Cars going in tomorrow ans wanna get the ball rolling asap.

This GT35x turbo is very interesting.

Have u detected even the faintest smell of fuel?

Reading on prev posts do you feel that your 3L surge is adequate?

How much did the complete replacement of lines set you back? Cars going in tomorrow ans wanna get the ball rolling asap.

This GT35x turbo is very interesting.

As i have my system in the boot, yes there is a smell of E85.

E85 smell is easy to live with though while driving. I actually like it lol

Not really sure on the cost of the lines themselves as the whole system was done all at once. Budget $1000 for them.

A fuel system will cost more than you budget for, it isn't as simple as it sounds

You could have it in the boot but you just have to seal the boot off.

Dave if you push that turbo really hard (eg like numbers we spoke about yesterday but more psi) you may find the limit. I got an autometer fuel pressure gauge, it's got a 30psi warning sound and light-well worth the $79 :ermm:

Uve got 2 subs in the boot so want to avoid any serious fuel system in there. At the same time if I mount it all externally I don't want to smell anyfuel. I understand increased diameter fuel lines are prob a good thing along with proven fittings to avoid any smell.

I just got my hands on a tome type L fuel reg along with 1000cc inj + greedy fuel rail.

Just trying to guage how much braided lines would cost to replace all the rubber stuff. If any distributors are reading this please contact me as I am ready Togo with cash. Just need to know a number to make sure I'm wing realistic.

Any advice from SAU'erz would ve most appreciated as well

Edit:

Has anyone had any experience with Teflon coated lines? I understand these are one of the few lines that can cope with e85, as others die over time.

Edited by Jap_Muscle
A fuel system will cost more than you budget for, it isn't as simple as it sounds

You could have it in the boot but you just have to seal the boot off.

Dave if you push that turbo really hard (eg like numbers we spoke about yesterday but more psi) you may find the limit. I got an autometer fuel pressure gauge, it's got a 30psi warning sound and light-well worth the $79 :ermm:

Id be hoping for a bit higher than 445rwkw with the GTX. Somewhere around the 480rwkw mark i think is achievable at 2bar :D

Well the pump is off the car. We (I) forgot to put one of the crush washers on the line side of the pump and had that little leak. Rookie head...... muck around with fuel pumps.... or lay on the lounge with a beer and watch the V8 Stupid cars.... hmmm :ermm:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Driveline vibration is resolved. I ended up loosening all my engine mount and trans mount bolts, giving it a good shake then retightening everything and it's gone... Let's just say I was surprised that fixed it.  I've been happily driving it around again but unfortunately put zero time into my direct port/constant pressure WMI setup. I'm on vacation next week, so I'll try and finalize it then.  On a different note, I spent all week fuel/ignition mapping 2x 216L V16 engines. Turbo's were burning glycol and we swapped them out for larger units. We also had planned emissions testing on site, so I figured I'd be there the same week to use their instrumentation and massage any emissions issues out if needed. This was a first for me. Fuel management is similar in certain ways to automotive (i.e air density as load variable) but very different in others. It's all PLC based and AFR's are controlled by air and not fuel. They use a control valve between the turbo and air manifold to control pressure which in turn controls AFR's. Due to this, target AFR tables supplied by the OEM are in pressures and not mass which really through me off. They use air pressure vs fuel pressure tables. I also relied on an O2 concentration sensor the emissions team had in the exhaust. Ignition timing was also all over the place and we were losing a fair bit of power. They're now happily sitting at 16-40BTDC depending on load. We were making about 1600kw at 900rpm at 90% load. Engines were running a lot smoother as well.    
    • heh, aint no R32 ever meeting modern targa cage rules unless the driver is veeeery short OP, good luck with the sale, since its already in the land of freedom I'm sure you will find a good buyer.
    • meh, it was a good video, clear about the issue and how he dealt with it. A bit heavy on the RTV and very brave to put an RB in anything without rebuilding it first, but otherwise I thought it was good Dose, I'm not sure that having the pickup forward is a big issue; yes of course the oil could shift under brakes but the sump should never be empty enough for that to be a problem (unless you also have a higher volume oil pump, and that oil can't return from the head to the sump quickly enough)
    • I can donate $100 to your upgrade fund. So long as you can donate the IC7 my way....
    • I'd love a Haltech ECU, and Haltech 10 dash. Was having a chat with Rob and Andy @ Haltech when Rob put one in his MR2. First one I'm kind of interested in too, as you can dim it RIGHT down. Andy was saying bright dashes is one of his peeves too!
×
×
  • Create New...