Jump to content
SAU Community

Recommended Posts

Clearing parts that i have stored up. Parts come from S1 and S1 R33 skylines. Some R32 gear and aftermarket as well.

Heaps of interior parts from S2 r33 avaliable

Take a look and PM me if you need anything not listed.

#1 R33 Series 1 spoiler (black) $50 ono

#2 Unknown Brand Cannon $30

#3 Apexi BOV (ok condition, gr8 sound) $50 each (got two)

#4 Series 2 two door tail lights and rear garnish $100 (white)

#5 Series 2 dash (ok conditon) $100 ono

#6 Rear Hicas unit x 2 $50

#7 R33 fuel tank x2 (gd condition) $50 ono

#8 Passengers Side Mirror (White) $50

#9 Passengers door trims (gd condition) $20 each

#10 Front hubs (LH and RH avaliable, 5 stud) $50 each

#11 Front Assemblies (knuckles and upper arms) $50 each

#12 Rear seat (gd condition) $50 ono

#13 Complete Dash loom $30

#14 Petrol Flapper/door $10

#15 Rear 2 door interior quarter panels $20 each

#16 Windscreen Washer Bottle $20

#17 Set of 17"x7" rims (good tires on 2, other 2 need replacing), $600 ono

minor gutter rash but overall pretty good, (will not fit over large brake calipers)

#18 A Pillar trims (no holes for gauges etc) $20 each

#19 Accelerator Pedal and Cable $40

#20 Drivers and passengers side seat belt S2 $15 each

#21 Steering Column with Barrel, Key and Trim surrounds $80

#22 Hks SSQ (gd condition) with rb25 adaptor $70

#23 Front RH and LH Guards (White in colour and gd condition) $80 each

#24 Reo Bar for behind R33 S2 Dash (Straight and good condition) $40

#25 R33 Engine Crossmember $50

#26 Stock R33 Turbo Actuator $40

#27 Flywheel and Bolts $80

#28 Extreme Heavy Duty Clutch and Pressure Plate (gd condition, hardly used) $100

#29 R33 Brake Booster and Cylinder (no plundger) $50

#30 R32/33 Stainless Steel Intercooler piping $100

#31 Manual R33 Brake Pedal $30

#32 Heater core/Unit from an R33 $40

#33 SRS Passengers Airbag, S2 Steering Wheel with Airbag and Airbag Module $make an offer$ (not activated)

#34 S2 Pink Label AFM $110

#35 Stock Rear Bar for an R33 (need respray) $40

#36 LH Black Front Guard $80

#37 Apexi Alloy Radiator (comes with Apexi cap, holds pressure, slight fan marks on some fins, overall gd condition) $250

#38 Front Rad support (Straight and in gd condition) $175

#39 Rear Cradle (minus diff and half shafts) $75

#40 S2 R33 Rear Strut Brace (standard) $100

#41 Black S2 Boot with S2 Spoiler ( great condition) $150

#42 Passengers Door (gd condition) minus mirror $85

#43 Rear Windscreen $75

#44 Side windows $30 each

#45 S2 Manual cluster with 96 xxx kms $125

#46 Auto Cluster $50

#47 S2 Glove Box (great condition) $50

#48 Manual Clutch pedal $40

#49 Slave cylinder with lines and fork piston etc $ 40

#50 S2 Front Grill Black in colour $50

ALL PRICES ARE (ONO)

PICS ON REQUEST

Happy to Post items at buyers expense.

Link to comment
https://www.sau.com.au/forums/topic/345462-wrecking-r33-s2/
Share on other sites

Pass seat belt - sold

centre console coin holder - sold

hks ssq bov - sold

drivers seat belt buckle - sold

interior door handles - sold

window motor drivers - sold

Plenty more parts to clear ....

Link to comment
https://www.sau.com.au/forums/topic/345462-wrecking-r33-s2/#findComment-5573540
Share on other sites

R33 S2 engine harness and ECU?

used them in my car buddy

have you got the stock turbo lines and banjo fittings?

just pulled them off my own car last night as i upgraded

not sure if i want to let them go but pm me and offer and i might be willing

Link to comment
https://www.sau.com.au/forums/topic/345462-wrecking-r33-s2/#findComment-5579341
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
×
×
  • Create New...