Jump to content
SAU Community

Recommended Posts

i have a problem...

my car drives fine during the day , but soon as i have to drive with my headlights on the battery goes flat. another thing is the wipers go really slow all the time and so do the windows.

ive replace the battery twice in the last 2 months , same with the alternator and starter motor , just to be sure..

but the problem keeps persisting. i dont see it being the alternator as its the same problem happening time and time again , and its not the battery because ive bought two new ones..

how the hell can i find out whats happening?

Link to comment
https://www.sau.com.au/forums/topic/345686-night-time-headlights-no-bingo/
Share on other sites

Use a multimeter to test the voltage at the battery under the various conditions - lights on, lights off, stereo on, stereo off, engine at idle, engine at 2000, any others you can think of.

Q - have you checked the tension on the alternator belt?

Use a multimeter to test the voltage at the battery under the various conditions - lights on, lights off, stereo on, stereo off, engine at idle, engine at 2000, any others you can think of.

Q - have you checked the tension on the alternator belt?

i haven't checked the tension but it seems to pretty tight like there isnt any play in it i dont think

by testing all them things what will that achieve? :(

did some testing with my multimeter and this is what i got :

Front Of Car, Car Off : 12.4

Boot Of Car, Car Off : 12.4

Boot Of Car , Car Off, Headlights on : 11.9

Front Of Car, Car Off, Headlights On : 11.9

Front Of Car , Running : 12.0

Boot Of Car , Running : 12.0

Boot Of Car, Car Running, With Lights : 11.7

Front Of Car, Car Running , With Lights : 11.7

Front Of Car , Car Running, With Lights , Stereo : 11.7

Boot Of Car , Car Running , With Lights , Stereo : 11.7

Boot Of Car , Car Running , With Lights , Stereo , Power Windows Going Down : 11.6

Front Of Car , Car Running , With Lights , Stereo , Power Windows Going Down : 11.6

did some testing with my multimeter and this is what i got :

Front Of Car, Car Off : 12.4

Boot Of Car, Car Off : 12.4

Boot Of Car , Car Off, Headlights on : 11.9

Front Of Car, Car Off, Headlights On : 11.9

Front Of Car , Running : 12.0

Boot Of Car , Running : 12.0

Boot Of Car, Car Running, With Lights : 11.7

Front Of Car, Car Running , With Lights : 11.7

Front Of Car , Car Running, With Lights , Stereo : 11.7

Boot Of Car , Car Running , With Lights , Stereo : 11.7

Boot Of Car , Car Running , With Lights , Stereo , Power Windows Going Down : 11.6

Front Of Car , Car Running , With Lights , Stereo , Power Windows Going Down : 11.6

That's way too low. Car idling your battery should be getting at least 13 volts. Did you change your alternator with cheap second hand ones both times? Could be duds?

That's way too low. Car idling your battery should be getting at least 13 volts. Did you change your alternator with cheap second hand ones both times? Could be duds?

cars been on charge all yesterday so... :(

both are 2nd hand

As mentioned above, alternator is stuffed.

Anyone having continual battery trouble should do a simple multi meter voltage check by gradually applying loads (headlights, wipers etc) to ensure the alternator is capable of keeping up.

If at around 2500rpm it drops below 13.8-14V with full electrical load, either the drive belt is slipping or the alternator is sad.

Useless replacing batteries if they're not getting full re-charge while driving.

A general rule of thumb for the correct tightness is being able to twist a belt with a thumb and finger a 1/2 turn and feel resistance. If you can turn it more than a 1/2 turn, you do not have enough tension on the belt. If you cannot turn it a 1/2 turn, you have too much tension on the belt. Loose belts will result in premature belt wear caused by the belt slipping along the pulleys. This can also cause an alternator to be unable to replace a charge to the battery fully. There may also be a pronounced squeal from the belt during operation from the belt slipping. Over-tightened belts can cause internal damage to the bearings inside the pulleys. It can also cause overheating of the belts and premature wear.

Read more: How to Adjust a Belt Tensioner | eHow.com http://www.ehow.com/how_5091204_adjust-bel...l#ixzz16SuNZ3dL

cars been on charge all yesterday so... :/

both are 2nd hand

Your options are:

1. Dud alternator, check the output from the alternator output terminal (the big one on the back of the alternator to earth) with the car running to see if you have more than 13.5v

2. Slipping belt (as per mlr's post)

3. If step one is deemed successful, a loss in connection between your alternator, battery and earth.

Your battery is a storage device, designed to start the vehicle and run accessories with the car off, your alternator then replenishes this once the car is running and supports all electrical needs.

Yes, do what blk94r33 says. If the alternator is working, you now have the task of finding the reason it's not charging the battery. Either someone you know who has a few clues about car electrics - or an Auto Electrician.

In hindsight ( and for future reference ) a trip to an Auto/Lec in the beginning, and have it fixed first go, may have been cheaper than 2 Batteries and 2 S/H Altenators, never mind all the inconvenience you've been through.

Yes, do what blk94r33 says. If the alternator is working, you now have the task of finding the reason it's not charging the battery. Either someone you know who has a few clues about car electrics - or an Auto Electrician.

In hindsight ( and for future reference ) a trip to an Auto/Lec in the beginning, and have it fixed first go, may have been cheaper than 2 Batteries and 2 S/H Altenators, never mind all the inconvenience you've been through.

wasnt that expensive , got the alternators free from a mate and i got the batteries on trade

got another alternator last night so gonna see if that works , if not ill try find the problem somewhere in the wiring on the car before i get paid then if i have enough ill take it to an auto elec, just not keen on leaving my car there overnight/weekend

swapped alternator over and hello 12v yet a-fking-gain

Are you checking this from the back of the alternator or the battery? You could have three good alternators but a broken connection between the alt and the battery/earth....

Are you checking this from the back of the alternator or the battery? You could have three good alternators but a broken connection between the alt and the battery/earth....

straight off the power on the alternator and also off the battery terminals in the engine bay

same power output no matter what i do

Ok, so you've had 4 different alternators on the car, belt tensioned, running, and still only getting 12 volts??? Your other option is giving the alt a *LIGHT* tap on the housing near the regulator as this can sometimes get them temporarily running again. Is the battery light on the dash staying on with the car running? Something VERY suss going on as I doubt you could get 4 dud alternators..... :)

Edited by blk94r33
Ok, so you've had 4 different alternators on the car, belt tensioned, running, and still only getting 12 volts??? Your other option is giving the alt a *LIGHT* tap on the housing near the regulator as this can sometimes get them temporarily running again. Is the battery light on the dash staying on with the car running? Something VERY suss going on as I doubt you could get 4 dud alternators..... :)

have had 3 alternators on it and thats including the one that came with the car that the motor was originally from

belt tension is perfect, have given it a couple of taps on the housing

battery light isnt illuminated at all , the only light that comes on for memory is just the handbrake one but thats obviously because the handbrake is up.

im starting to think theres a leak somewhere in the car ? just dont know where or what from...

i'd check the following 2 things:

1: the major wires running to and from tha alternator

2: the earth wire for the battery

sounds like 1 of them may be the issue and the reason why you aren't getting charge. i had a falcon that wouldn't charge the battery. turns out the earth wire from the alternator was completely shot. had a mates falcon do the same thing. the fact that you have put multiple alternators on and it hasn't changed makes me think it is a wiring issue.

Bare with me as I'm posting off my phone now

Me and my mate started testing everything again , long story short the plug That goes in the side of the alternator was only getting power on one side of it. Basically it wasn't getting excite or something.

Tested it with a test light and multimeter and nothing. Found an ignition power source , wired it to the plug and we have 14v on idle now. Headlights are brighter and everything works mint!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi GTSBoy, Excuse my ignorance but what does a "Bad" Knee point mean ? 
    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
×
×
  • Create New...