Jump to content
SAU Community

Recommended Posts

I know of an r31 in japan that can cut an 11

and yes 12's are very doable in an r32 rb 20.

ben gtr came pretty close with his gts4.

there is an r32 gtst with an rb26 i qld that runs a low 11's

the bigest thing holding people with rb/20's back is you need to take the big step to run 12's injecotrs big turbo and metal head gasket. the are some strong rb20's around jsut because you dont hear of them doesn't mean they dont exist.

btw there was another from pet in melb that ran a 12.9 or so with a top speed of 120 or so

I expect dr drift here to come close to a 12 if he continues his development program on his car.

meggala

as for me I'm happy with a mid 13 unless someone wants to pay me to run faster

Link to comment
https://www.sau.com.au/forums/topic/3465-fast-rb20s/#findComment-58206
Share on other sites

the JMS onveia rb20 powered silvia ran a 12.2 i think, it was running a std motor with big turbo etc, the silvia would weigh about 100kg less as it was stripped out.

Their cerifio rand a 12.9 i think and that has just got a hks 2530 turbo.

The rb20 just needs a good turbo with some good tuning.

Link to comment
https://www.sau.com.au/forums/topic/3465-fast-rb20s/#findComment-58209
Share on other sites

boostmeister would be the person you should consult with.. I can see you want to build a daily drivable thats capable of 12s on track..

You might want to visit:

http://www.amkread.co.jp/

and check out some of the records... there should be a HNR32 (GTS4) with RB20DET 2.4litre T88 that ran 9.8s... You won't see any RB20DET 2.0litre cars break into low 11s or 10s as in Japan they don't use full slick tyres.

Link to comment
https://www.sau.com.au/forums/topic/3465-fast-rb20s/#findComment-58297
Share on other sites

Mine should be able to (with some traction). Best so far is high 13's (bear with me here, i'm not kidding, it should do 12's). This was on standard, near bald crappy tyres. I also missed the change to second on this run.

I was going past the 1/8th mile mark with the wheels still spinning in third gear. Got traction in 4th. I did have the highest mph for the Street class. My mph was a consistent 110mph.

I think with some traction, should do a high 12.

I got Trust TD06-20G turbo, Trust intercooler, Trust tuned length exhaust manifold. Trust external wastegate. Extra injector. Upgraded fuel pump. Running up to 1.5 bar boost.

:burnout:

Link to comment
https://www.sau.com.au/forums/topic/3465-fast-rb20s/#findComment-59280
Share on other sites

perhaps learning to drag race will help your time?

Foot to fhe floor is not the best way to get best times?

You dont see top fuel drivers spinning their wheels through gears and they get pretty good times.

Try applying power gradually

Saying that "Yer she was spinning into 4th" may sound like your car is uber powerful etc... but it doesnt help your et's.

Link to comment
https://www.sau.com.au/forums/topic/3465-fast-rb20s/#findComment-59439
Share on other sites

Originally posted by JiMiH

I originally meant in street trim, without slicks

slicks = cheating :rolleyes:

set of bfg drag radial TA's are DOT and therefore not cheating, Niz30 with his mph has a low 11 potential with these sort of tyres and a Whiteline KCA349 diff kit (only $104).

Link to comment
https://www.sau.com.au/forums/topic/3465-fast-rb20s/#findComment-59716
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...