Jump to content
SAU Community

The Epic Journey

OBY

By OBY,
in Australian Capital Territory

 Share

Recommended Posts

OBY Contributor

OBY

Posted
Posted

Ok, here's the story,

I started my drive from canberra to the Gold Coast at around 11 30 on sunday arvo. The car (my R33) was going really well, loving the highway and the room to stretch her long legs. I was sitting pretty until we hit the light horse interchange and I noticed that the temp guage had moved to about 3/4 I thought it could have been because of the long drive and I was running everything, So I turned off the aircon and kept going. We got off the highway to head through sydney and the first set of lights we hit the temp gauge jumped right up the the line before the 'H" so I pulled over and there was water pissing out of the overflow bottle. I let her sit and called NRMA, he came out and notice a few small leaking pipes but nothing major. And jeremy told me about a manual overide switch for the thermo fan. SO at about 5pm I started off again. Once again just plowing along. I was fine until 0300 when I was just north of Coffs Harbour and I heard a strange noise when I hit one of the thousand pott holes in that road. I heard it again about 30 seconds later, still not sure what was going on. So I looked down at the dash and noticed the battery light was off, once again I was running everything so I just turned off the radio. As I went around the next corner I noticed the power steering had died. Anyway I was about 2 mins from a servo so I pulled in there and had a look in the engine bay and there is my Harmonic balancer sitting off at a really bad angle.

I got towed into woolgoolga and they confirmed (the next day) that the crank had been totally flogged out. So in the next week she's getting a new crank, new harmonic balancer, new bearings, new oil pump, new thermostat for the radiator, and new radiator lines.

OK well now that's off my chest lol.

To make this topic interesting how about people post up their own "epic journeys" where everthing has just gone wrong

Cheers,

OB

Link to comment
https://www.sau.com.au/forums/topic/347498-the-epic-journey/
Share on other sites
Melly Grand Master

Melly

Posted
Posted

Pissed n Broke now? I can tell you own a Skyline.

As we blokes say "tits n wheels will send you broke".

I liken it to be a bit like marriage, but at least you can fix a car up.....

A lot less expensive too :P

Yeah I have that problem too... A boob job would cost about 10k... Plus car expenses...

OBY Contributor

OBY

Posted
  • Author
Posted

Nah it's being rebuilt with decent parts. The cheap part is the larbour. The guy only charges 77$ an hour. Nispro wanted 180$ an hour for labour. But yeah i'm putting all dencent parts in it like ACL race bearings, I geniune RB26 crank (gonna see how much an HKS drop forged crank is) and loads of other stuff I can't remember

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Dose Pipe Sutututu
      new 1.5 LSD issues/concerns

      By Dose Pipe Sutututu · Posted

      Have you flushed the initial fluid yet? It should look like a rainbow unicorn shat glitter into it. 2nd or 3rd fluid change is when you party.
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      all brand new unit from Tomei, fluid, bearings, etc. Tomei said they call it a 1.5 lsd because its 100 percent lock up under acceleration and 50 percent under deacceleration.  as I mentioned I used their fluid, install and their break-in procedure, (alot of figure 8's) but even when driving straight, or even slowly backing out of garage for first time, (at 2 mph) then driving to and from figure 8 parking lot, each tire in the rear would sporadically grab, skip, bounce, shutter and skip, shutter back a force I could feel causing clutch to slip then grab, at any speed. shaking entire car. I removed unit, since I put stock back in and all is fine, via process of elimination, its something with the lsd unit itself. I wasn't going to beat up the entire car more or change anything else for no reason as I had a feeling something in the lsd itself was wrong as everything was fine before this alone was installed and I rechecked over everything else after first time backing out I suspected an issue. I'll probably sadly already need new tires now just from trying to drive it 5 miles and performing the figure 8 break in. but if someone has any ideas I'm all ears 
    • PranK
      Most women will agree that parking is the most taxing part of driving

      By PranK · Posted

      Go back and watch the video again... 
    • funkymonkey
      Most women will agree that parking is the most taxing part of driving

      By funkymonkey · Posted

      Are you meant to double fist them?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
×
×
  • Create New...